Fuel injectors
  1. Home
  2. denso
  3. #09450-06890

09450-06890 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935003840
09450-06890 PUMP ASSY, INJECTI
Rating:
10
Buy PUMP ASSY, INJECTI 09450-06890 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-06890

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-06890 PUMP ASSY, INJECTI 31A6502010
005. [01] 09011-05070 HOUSING SUB-ASSY, 47X0104200
006. [04] 09013-10520 HOLDER, DELIVERY V
007. [04] 09013-60640 SPRING, DELIVERY V
008. [04] 09013-70130 GASKET, DELIVERY V
009. [04] 09014-02500 VALVE SUB-ASSY, IN 47X0104300
010. [04] 09015-05450 ELEMENT SUB-ASSY, 47X0104400
011. [04] 09016-10210 SLEEVE, PLUNGER CO
012. [04] 09016-30082 SEAT, SPRING, UPR MM501098
013. [04] 09016-40170 SPRING, PUMP PLUNG
014. [04] 09017-00170 TAPPET SUB-ASSY,IN EZ01775027
014-001. [04] 09017-10022 TAPPET, INJECTION
014-002. [04] 09217-60010 ROLLER, FEED PUMP 09217-60010
014-003. [04] 09017-60020 PIN, INJECTION PUM
015. [04] 09018-30050 PIN, INJECTION PUM
016. [01] 09021-00440 RACK ASSY, CONTROL
017. [04] 09030-10060 SEAT, SPRING, LWR EZ0177514
018. [02] 09046-70030 PLATE
019. [4C] 09031-10310 PLATE, TAPPET ADJU
019. [4C] 09031-10300 PLATE, TAPPET ADJU
019. [4C] 09031-10280 PLATE, TAPPET ADJU
019. [4C] 09031-10170 PLATE, TAPPET ADJU FR51530028
019. [4C] 09031-10160 PLATE, TAPPET ADJU FR51530027
019. [4C] 09031-10140 PLATE, TAPPET ADJU 09031-10140
019. [4C] 09031-10130 PLATE, TAPPET ADJU 09031-10130
019. [4C] 09031-10120 PLATE, TAPPET ADJU 09031-10120
019. [4C] 09031-10110 PLATE, TAPPET ADJU 09031-10110
019. [4C] 09031-10010 PLATE, TAPPET ADJU 09031-10010
020. [01] 94901-81020 WASHER, COPPER PLA 94901-81020
020. [01] 09022-20080 WASHER, FUEL PIPE MM500114
021. [01] 09024-40180 SCREW, AIR BLEEDER
022. [01] 94918-00310 SCREW, HOLLOW 85265-00078
023. [03] 09006-80020 PLATE, ADJUSTING
024. [03] 94904-80800 BOLT, WASHER HEAD MM514195
025. [04] 90802-20150 O-RING
025. [04] 09013-90410 O-RING 47X0122700

Include in #3:

09450-06890 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-06890  31A6502010  PUMP ASSY, INJECTI
31A6502010    MITSUBISHI PUMP ASSY, INJECTI




Information:

2. Remove two short bolts (1) and two longer bolts (2) from manifold (3) and BrakeSaver housing.3. Remove the manifold from the control valve. 4. Remove the three bolts from elbows (5) and the control valve.5. Remove four bolts (4) that hold the control valve to the oil pan.6. Remove the control valve from under the oil pan.7. Make an inspection of the O-ring seals on the manifold and on the control valve. If there is wear or damage make a replacement of the O-ring seals.Install Brakesaver Control Valve
1. Put clean SAE 30 engine oil on O-ring seals (1).2. Put the control valve in position under the oil pan. Install the four bolts that hold the control valve to the oil pan.3. Install the elbow and the bolts that hold it to the side of the control valve. 4. Put SAE 30 engine oil on the O-ring seals of the manifold. Install manifold (2) in the control valve. Install the four bolts that hold the manifold to the BrakeSaver housing.5. Fill the engine with oil. See 3408 TRUCK ENGINE LUBRICATION AND MAINTENANCE GUIDE.Disassemble Brakesaver Control Valve
start by:a) remove BrakeSaver control valve 1. Remove O-ring seals (1) from the valve body.2. Remove four bolts (2) slowly and evenly from cover (4). Remove the cover.
Spring force is behind the cover at removal.
3. Remove cover (3) and the seal from the opposite end of the valve body. 4. Remove spool (8) as an assembly.5. Remove spring (7), stop (10), spring (6) and slug (9).6. Remove the seals and sleeve (5). 7. Remove bolt (11), plate (13) and diaphragm (12) from the spool. Make an inspection of the pin on the spool, and make a replacement of the pin if there is damage or wear.Assemble Brakesaver Control Valve
1. Install diaphragm (4) and plate (8) on valve spool (3). Make alignment of the hole in the plate valve with the pin on the spool. Install the bolt that holds the plate and the diaphragm in position.
When diaphragm (4) is installed on valve spool (3), make sure the fabric side is pulled down over the valve spool to make contact with it and the smooth (rubber coated) side is next to valve body.
2. Install sleeves (1) and the seals in the valve body. 3. Install the valve spool as an assembly into the valve body. As the valve spool is installed, make sure the edge of the diaphragm makes contact all the way around with the groove in the valve body. At this time the valve spool end must extend about 1.50 in. (38.1 mm) from the valve body. Push the valve spool about .25 in. (6.4 mm) - .50 in. (12.7 mm) farther into the valve body until a curved depression is caused between the valve spool and valve body. Make sure there are no wrinkles in the diaphragm. 4. Put cover (9) in position. Install the four bolts that hold the cover on the valve body. Move the valve spool in the

Have questions with 09450-06890?





09450-06880 PUMP ASSY, INJECTI 09450-06870 09450-06860 09450-06850 09450-06840
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-06890

Back to top