Fuel injectors
  1. Home
  2. denso
  3. #09450-05030

09450-05030 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935002170
09450-05030 PUMP ASSY, INJECTI
Rating:
65
Buy PUMP ASSY, INJECTI 09450-05030 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-05030

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-05030 PUMP ASSY, INJECTI 17079-51011
005. [04] 09013-10280 HOLDER, DELIVERY V 15601-51221
005. [04] 09013-10520 HOLDER, DELIVERY V
006. [04] 09013-60540 SPRING, DELIVERY V
007. [04] 90802-20150 O-RING 14611-51201
008. [04] 09013-70061 GASKET, DELIVERY V 15221-51241
008. [04] 09013-70130 GASKET, DELIVERY V 11420-51241
009. [04] 09014-00410 VALVE SUB-ASSY, IN 15221-51031
010. [04] 09015-04480 ELEMENT SUB-ASSY, 17079-51051
011. [04] 09016-10520 SLEEVE, PLUNGER CO
012. [04] 09016-30082 SEAT, SPRING, UPR 15221-51271
013. [04] 09016-40170 SPRING, PUMP PLUNG 15221-51281
014. [04] 09030-10060 SEAT, SPRING, LWR 15021-51291
015. [4C] 09031-10310 PLATE, TAPPET ADJU
015. [4C] 09031-10300 PLATE, TAPPET ADJU
015. [4C] 09031-10280 PLATE, TAPPET ADJU
015. [4C] 09031-10170 PLATE, TAPPET ADJU
015. [4C] 09031-10160 PLATE, TAPPET ADJU
015. [4C] 09031-10140 PLATE, TAPPET ADJU
015. [4C] 09031-10130 PLATE, TAPPET ADJU 15221-51491
015. [4C] 09031-10120 PLATE, TAPPET ADJU
015. [4C] 09031-10110 PLATE, TAPPET ADJU
015. [4C] 09031-10010 PLATE, TAPPET ADJU 14109-51301
016. [04] 09017-00170 TAPPET SUB-ASSY,IN 15221-51071
016-001. [04] 09017-10021 TAPPET, INJECTION 15021-51990
016-002. [04] 09217-60010 ROLLER, FEED PUMP 15109-52931
016-003. [04] 09017-60020 PIN, INJECTION PUM 15021-51970
017. [04] 09018-30050 PIN, INJECTION PUM 14611-51251
018. [02] 09046-70030 PLATE 14611-51441
019. [01] 09021-00680 RACK ASSY, CONTROL
020. [03] 09006-80020 PLATE, ADJUSTING 14384-51391
021. [03] 94904-71980 BOLT, W/WASHER 15221-91031
021. [03] 94904-80800 BOLT, WASHER HEAD
022. [01] 09024-50170 SCREW, HOLLOW 15471-51321
024. [02] 09022-20050 WASHER, FUEL PIPE 15109-51731
025. [01] 09011-01332 HOUSING SUB-ASSY,
025. [01] 09011-04310 HOUSING SUB-ASSY, 16475-51081

Include in #3:

09450-05030 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-05030  17079-5101  PUMP ASSY, INJECTI
17079-51011    KUBOTA PUMP ASSY, INJECTI




Information:

3. Disconnect all fuel injection lines (2) from the pump housing. Put caps and plugs in all lines or openings.4. Disconnect sensing line (1) from fuel ratio control.5. Disconnect fuel supply line (3) from fuel injection pump housing.6. Remove the two bolts (5) that hold bracket to the cylinder block.7. Remove the bolts (4) that hold injection pump housing to accessory drive housing. Remove the fuel injection pump housing and governor. Weight of pump housing and governor is 70 lb. (32 kg).Install Fuel Injection Pump Housing And Governor
1. Remove plugs and caps from lines and openings. Put the fuel injection pump housing and governor in position on engine, and install the bolts in accessory drive housing (1).2. Install the two bolts in bracket (2).3. Connect the fuel injection lines to the pump housing. Tighten the nuts to 30 5 lb.ft. (4.1 0.7 mkg).4. Connect fuel supply line to pump housing.5. Connect the sensing line to fuel ratio control.6. Connect control linkage for the governor.7. Check the camshaft timing for the fuel injection pumps. See FUEL INJECTION PUMP CAMSHAFT TIMING in TESTING AND ADJUSTING.Separation Of Governor From Fuel Injection Pump Housing
start by: a) remove fuel injection pump housing and governorb) remove fuel ratio controlc) remove fuel shutoff solenoid1. Remove the idle screw cover, plate, and housing. 2. Remove the screw (2) from rack stop collar.3. Remove rack stop collar (3), spring, and collar.4. Remove the bolts (1) that hold the governor to the fuel injection pump housing. Remove the governor housing.5. Remove the spring and seat assembly from the governor housing. 6. Remove the washer-type spring (5).7. Remove the three bolts (4) and lock.8. Remove the cylinder and weight assembly (6).Connection Of Governor To Fuel Injection Pump Housing
1. Put the cylinder and weight assembly (2) in position on the injection pump housing so the opening in piston (1) is engaged with groove in rack (3). Install the lock and three bolts. 2. Install the washer-type spring (4) so inside diameter of spring will be against the guide in governor housing (5).3. Install the spring and seat assembly in the governor housing. Put the governor housing (5) in position on pump housing, and install the bolts.4. Put the spring, collar, and rack stop collar in position, and install the screw in rack stop collar. Install idle screw housing.end by: a) install fuel shutoff solenoidb) install fuel injection pump housing and governorc) make adjustments to rack and governor as given in TESTING AND ADJUSTINGd) install fuel ratio control

Have questions with 09450-05030?





09450-05020 PUMP ASSY, INJECTI 09450-05010 09450-05000 09450-04990 09450-04980
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-05030

Back to top