Fuel injectors
  1. Home
  2. denso
  3. #09450-05010

09450-05010 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935003350
09450-05010 PUMP ASSY, INJECTI
Rating:
63
Buy PUMP ASSY, INJECTI 09450-05010 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-05010

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-05010 PUMP ASSY, INJECTI MM438029
003. [01] 09011-03890 HOUSING SUB-ASSY, MM501962
004. [03] 09013-10830 HOLDER, DELIVERY V MM501918
005. [03] 09013-60530 SPRING, DELIVERY V MM501146
006. [03] 09013-70130 GASKET, DELIVERY V MM501856
006. [03] 09013-70061 GASKET, DELIVERY V P720-16141
007. [03] 09014-01900 VALVE SUB-ASSY, IN MM514079
008. [03] 09015-04280 ELEMENT SUB-ASSY, MM514078
010. [03] 09016-00140 SLEEVE SUB-ASSY, C MM501999
011. [03] 09016-30140 SEAT, SPRING, UPR
012. [03] 09016-40220 SPRING, PUMP PLUNG
013. [03] 09016-50170 SEAT, SPRING, LWR
014. [03] 09017-00220 TAPPET SUB-ASSY,IN
015. [01] 09021-00600 RACK ASSY, CONTROL MM501963
016. [01] 09024-40010 SCREW, AIR BLEEDER MM501930
017. [01] 09024-50310 SCREW, HOLLOW MM501931
018. [01] 09024-80010 WASHER, DRAIN SCRE ME702175
019. [02] 09025-10010 WASHER, INJECTION ME702595
020. [02] 94900-20500 SCREW, COUNTERSUNK MM501935
021. [01] 09069-11270 BRACKET, STOP WIRE MM501964
022. [03] 09013-90400 O-RING
022. [03] 90801-10130 O-RING ME703339
023. [2C] 09031-10450 PLATE, TAPPET ADJU MM501952
023. [2C] 09031-10440 PLATE, TAPPET ADJU MM501951
023. [2C] 09031-10430 PLATE, TAPPET ADJU MM501950
023. [2C] 09031-10420 PLATE, TAPPET ADJU MM501949
023. [2C] 09031-10410 PLATE, TAPPET ADJU MM501948
023. [2C] 09031-10400 PLATE, TAPPET ADJU MM501947
023. [2C] 09031-10390 PLATE, TAPPET ADJU MM501946
023. [2C] 09031-10380 PLATE, TAPPET ADJU MM501945
023. [2C] 09031-10320 PLATE, TAPPET ADJU
023. [2C] 09031-10330 PLATE, TAPPET ADJU
023. [2C] 09031-10340 PLATE, TAPPET ADJU MM501941
023. [2C] 09031-10350 PLATE, TAPPET ADJU MM501942
023. [2C] 09031-10360 PLATE, TAPPET ADJU MM501943
023. [2C] 09031-10370 PLATE, TAPPET ADJU MM501944
025. [01] 94918-10470 NIPPLE, SWIVELING
026. [03] 09023-00070 PLATE SET, VALVE H MM501933
027. [02] 09018-30090 PIN, INJECTION PUM MM501932
028. [02] 91370-05101 SCREW, W/WASHER MZ701679
028. [03] 94900-75390 SCREW, W/WASHER MM514190

Include in #3:

09450-05010 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-05010  MM438029  PUMP ASSY, INJECTI
MM438029    MITSUBISHI PUMP ASSY, INJECTI




Information:

1. Install the two fuel lines in transfer pump.2. Put the fuel transfer pump in position in the accessory drive housing, and install the two bolts.3. Connect the two fuel lines to priming pump.4. Connect the fuel line to transfer pump.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump

Have questions with 09450-05010?





09450-05000 PUMP ASSY, INJECTI 09450-04990 09450-04980 09450-04970 09450-04960
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-05010

Back to top