Information pump assy, injecti
Nozzle:
0935003350
Rating:
Components :
| 001. | PUMP ASSY, INJECTI | 09450-03910 |
Scheme ###:
| 000. | [01] | 09450-03910 | PUMP ASSY, INJECTI | MM433647 |
| 001. | [01] | 09011-03730 | HOUSING SUB-ASSY, | MM501917 |
| 002. | [03] | 09013-10830 | HOLDER, DELIVERY V | MM501918 |
| 003. | [03] | 09013-60530 | SPRING, DELIVERY V | MM501146 |
| 004. | [03] | 09013-70130 | GASKET, DELIVERY V | MM501856 |
| 005. | [03] | 09014-01810 | VALVE SUB-ASSY, IN | MM501955 |
| 006. | [03] | 09015-03840 | ELEMENT SUB-ASSY, | MM501921 |
| 007. | [03] | 09016-00140 | SLEEVE SUB-ASSY, C | MM501999 |
| 008. | [03] | 09016-30140 | SEAT, SPRING, UPR | |
| 009. | [03] | 09016-40220 | SPRING, PUMP PLUNG | |
| 010. | [03] | 09016-50170 | SEAT, SPRING, LWR | |
| 011. | [03] | 09017-00220 | TAPPET SUB-ASSY,IN | |
| 012. | [01] | 09021-00560 | RACK ASSY, CONTROL | MM501929 |
| 013. | [01] | 09024-40010 | SCREW, AIR BLEEDER | MM501930 |
| 014. | [01] | 09024-50310 | SCREW, HOLLOW | MM501931 |
| 015. | [01] | 09024-80010 | WASHER, DRAIN SCRE | ME702175 |
| 016. | [02] | 09025-10010 | WASHER, INJECTION | ME702595 |
| 017. | [03] | 09018-30090 | PIN, INJECTION PUM | MM501932 |
| 018. | [03] | 09023-00070 | PLATE SET, VALVE H | MM501933 |
| 019. | [01] | 09069-11020 | BRACKET, STOP WIRE | MM501934 |
| 020. | [02] | 94900-20500 | SCREW, COUNTERSUNK | MM501935 |
| 021. | [03] | 94900-75390 | SCREW, W/WASHER | MM514190 |
| 022. | [03] | 90801-10130 | O-RING | ME703339 |
| 022. | [03] | 09013-90400 | O-RING | |
| 023. | [01] | 09221-70470 | NIPPLE, SWIVEL | MM501965 |
| 024. | [3C] | 09031-10400 | PLATE, TAPPET ADJU | MM501947 |
| 024. | [3C] | 09031-10410 | PLATE, TAPPET ADJU | MM501948 |
| 024. | [3C] | 09031-10420 | PLATE, TAPPET ADJU | MM501949 |
| 024. | [3C] | 09031-10430 | PLATE, TAPPET ADJU | MM501950 |
| 024. | [3C] | 09031-10440 | PLATE, TAPPET ADJU | MM501951 |
| 024. | [3C] | 09031-10390 | PLATE, TAPPET ADJU | MM501946 |
| 024. | [3C] | 09031-10380 | PLATE, TAPPET ADJU | MM501945 |
| 024. | [3C] | 09031-10370 | PLATE, TAPPET ADJU | MM501944 |
| 024. | [3C] | 09031-10360 | PLATE, TAPPET ADJU | MM501943 |
| 024. | [3C] | 09031-10350 | PLATE, TAPPET ADJU | MM501942 |
| 024. | [3C] | 09031-10340 | PLATE, TAPPET ADJU | MM501941 |
| 024. | [3C] | 09031-10330 | PLATE, TAPPET ADJU | |
| 024. | [3C] | 09031-10320 | PLATE, TAPPET ADJU | |
| 024. | [3C] | 09031-10450 | PLATE, TAPPET ADJU | MM501952 |
Include in #3:
09450-03910
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 09450-03910 | MM433647 | PUMP ASSY, INJECTI | |
| MM433647 | MITSUBISHI | PUMP ASSY, INJECTI |
Information:
1. Unscrew and remove filter (right hand thread). 2. Clean the filter housing base. Be sure all of old filter gasket is removed. 3. Lubricate the filter gasket with clean diesel fuel and fill the filter with clean diesel fuel. 4. Install the filter. Tighten filter by hand until gasket contacts base; then tighten 1/2 turn more.5. Prime the system. Priming Fuel System:1. Loosen the cap on the tee on top of fuel filter base. 2. Operate starter until the flow of fuel from the filter is continuous and free of bubbles.3. Tighten cap. If engine fails to start, misfires or smokes, further priming is necessary.4. Loosen each fuel line nut one at a time at