Fuel injectors
  1. Home
  2. denso
  3. #09450-03190

09450-03190 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935001560
09450-03190 PUMP ASSY, INJECTI
Rating:
10
Buy PUMP ASSY, INJECTI 09450-03190 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-03190

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-03190 PUMP ASSY, INJECTI 19484-51013
001. [01] 09011-01161 HOUSING SUB-ASSY, 15321-51081
005. [03] 09013-10520 HOLDER, DELIVERY V
006. [03] 09013-60230 SPRING, DELIVERY V 15221-51231
007. [03] 90802-20150 O-RING 14611-51201
008. [03] 09013-70061 GASKET, DELIVERY V 15221-51241
008. [03] 09013-70130 GASKET, DELIVERY V 11420-51241
009. [03] 09014-00620 VALVE SUB-ASSY, IN 15271-51031
010. [01] 09015-03420 ELEMENT SUB-ASSY,
011. [03] 09016-10210 SLEEVE, PLUNGER CO 15221-51382
012. [03] 09016-30082 SEAT, SPRING, UPR 15221-51271
013. [03] 09016-40170 SPRING, PUMP PLUNG 15221-51281
014. [03] 09030-10070 SEAT, SPRING, LWR
015. [ C] 09031-10310 PLATE, TAPPET ADJU
015. [ C] 09031-10300 PLATE, TAPPET ADJU
015. [ C] 09031-10280 PLATE, TAPPET ADJU
015. [ C] 09031-10170 PLATE, TAPPET ADJU
015. [ C] 09031-10160 PLATE, TAPPET ADJU
015. [ C] 09031-10140 PLATE, TAPPET ADJU
015. [ C] 09031-10130 PLATE, TAPPET ADJU 15221-51491
015. [ C] 09031-10120 PLATE, TAPPET ADJU
015. [ C] 09031-10110 PLATE, TAPPET ADJU
015. [ C] 09031-10010 PLATE, TAPPET ADJU 14109-51301
016. [03] 09017-00170 TAPPET SUB-ASSY,IN 15221-51071
016-001. [03] 09017-10021 TAPPET, INJECTION 15021-51990
016-002. [03] 09217-60010 ROLLER, FEED PUMP 15109-52931
016-003. [03] 09017-60020 PIN, INJECTION PUM 15021-51970
017. [03] 09018-30050 PIN, INJECTION PUM 14611-51251
018. [01] 09046-70040 PLATE 19484-51461
019. [01] 09021-00221 RACK ASSY, CONTROL 15321-51061
020. [02] 09007-00012 PLATE ASSY, ADJUST 14611-51391
020. [02] 09006-80020 PLATE, ADJUSTING 14384-51391
022. [02] 94904-71980 BOLT, W/WASHER 15221-91031
022. [02] 94904-80800 BOLT, WASHER HEAD
023. [01] 09024-50012 SCREW, HOLLOW 15021-51321
024. [01] 94901-81020 WASHER, COPPER PLA 15221-96661
025. [01] 09024-40080 SCREW, AIR BLEEDER 15221-51351
026. [02] 09024-10010 WASHER, AIR BLEEDE 15221-96651

Include in #3:

09450-03190 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-03190  19484-5101  PUMP ASSY, INJECTI
19484-51013    KUBOTA PUMP ASSY, INJECTI




Information:

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Removing the Fuel Injection Pump
Remove the counterweight from the machine.
Shut off the disconnect switch for the main power.
Manually crank the engine until the No. 1 piston is at the top center on the compression stroke.
Illustration 1 g01400895
Disconnect the fuel inlet and the fuel return hoses (9) from the fuel injection pump.
Remove the fuel hose from the transfer pump to the priming pump (4) .
Remove the fuel hose from the filter to the fuel injection pump (1) .
Remove the tubes to the injector and remove the clamps (2) .
Remove the pipe for the fuel return and the clamps (3) .
Remove the oil tube for lubrication from fuel injection pump (10). Plug the ports with 5I-7505 Plug .
Remove the oil tube for lubrication from timing gear cover (8). Plug the empty ports with 5I-7505 Plug .
Disconnect the shut off solenoid. Remove the shut off solenoid and remove the connection rod from the fuel injection pump (12) .
Remove the timing gear cover (5), the cover, the bolts and washers. The components will be reinstalled.
Remove the bracket for the fuel injection pump (11) .
Remove the fuel injection pump (6) .
Illustration 2 g01400940
Loosen the connector for the governor cable (13). Disconnect the cable from the lever.
Remove the spring and remove the bracket (14) .
Remove the governor lever (15) .
Illustration 3 g01400950
Loosen nuts (17). Remove the cable for the governor from the bracket.
Remove bracket (16) .
Illustration 4 g01400963
Remove clip (18) .
Remove the clip and bracket (19). Do not discard the components.
Illustration 5 g01400997
Illustration 6 g01401000
Detail A
Remove bolt (20). Remove bracket (21) .
Cut strap (22). Remove the harness.
Illustration 7 g01401009
Detail B
Disconnect the harness from shut off solenoid (23). Remove the harness.Installing the new Rotary Fuel Injection Pump
Illustration 8 g01401319
(24) 306-2165 Pump Flange (25) 306-2160 Rotary Fuel Injection Pump
Mount the rotary fuel injection pump (25) on the flange (24) with 294-5060 O-Ring Seal , 234-4835 Studs and 244-7127 Flange Nuts .
Illustration 9 g01401330
(26) 306-2164 Rotary fuel Injection Pump Gear (27) 294-7251 Bolt (28) 300-3988 O-Ring Seal
Mount gear (26) on the pump shaft.Note: Ensure that the two "3's" on the rotary fuel injection pump gear straddle a tooth on the idler gear. The "3's" do not need to straddle the "3" on the idler gear.
Install the rotary fuel injection pump and flange assembly. Use bolt (27) and O-ring (28) in order to install the rotary fuel injection pump and the flange assembly.
Illustration 10 g01401333
(31) 212-8510 Nut (32) 199-2354 Bolt (33) 6V-6317 Bolt (34) 6V-5839 Washer (35) 235-4970 Bolt (36) 300-3867 Washer (37) 225-52

Have questions with 09450-03190?





09450-03181 PUMP ASSY, INJECTI 09450-03170 09450-03160 09450-03150 09450-03140
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-03190

Back to top