Fuel injectors
  1. Home
  2. denso
  3. #09450-02510

09450-02510 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935002310
09450-02510 PUMP ASSY, INJECTI
Rating:
63
Buy PUMP ASSY, INJECTI 09450-02510 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-02510

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-02510 PUMP ASSY, INJECTI 35430-163-20A
001. [01] 09011-03020 HOUSING SUB-ASSY,
005. [03] 09013-10520 HOLDER, DELIVERY V
006. [03] 09013-60540 SPRING, DELIVERY V
007. [03] 90802-20150 O-RING
008. [03] 09013-70061 GASKET, DELIVERY V
008. [03] 09013-70130 GASKET, DELIVERY V
009. [03] 09014-00800 VALVE SUB-ASSY, IN
010. [01] 09015-03020 ELEMENT SUB-ASSY,
011. [03] 09016-10100 SLEEVE, PLUNGER CO
011. [03] 09016-10210 SLEEVE, PLUNGER CO
012. [03] 09016-30082 SEAT, SPRING, UPR
013. [03] 09016-40170 SPRING, PUMP PLUNG
014. [03] 09030-10060 SEAT, SPRING, LWR
015. [ C] 09031-10170 PLATE, TAPPET ADJU
015. [ C] 09031-10160 PLATE, TAPPET ADJU
015. [ C] 09031-10140 PLATE, TAPPET ADJU
015. [ C] 09031-10130 PLATE, TAPPET ADJU
015. [ C] 09031-10120 PLATE, TAPPET ADJU
015. [ C] 09031-10110 PLATE, TAPPET ADJU
015. [ C] 09031-10010 PLATE, TAPPET ADJU
016. [03] 09017-00170 TAPPET SUB-ASSY,IN
016-001. [03] 09017-10021 TAPPET, INJECTION
016-002. [03] 09217-60010 ROLLER, FEED PUMP
016-003. [03] 09017-60020 PIN, INJECTION PUM
017. [03] 09018-30050 PIN, INJECTION PUM
018. [01] 09018-50020 PIN, CLAMP
018. [01] 09046-70040 PLATE
019. [01] 09021-00490 RACK ASSY, CONTROL
020. [02] 09007-00012 PLATE ASSY, ADJUST
020. [02] 09006-80020 PLATE, ADJUSTING
022. [02] 94904-71980 BOLT, W/WASHER
022. [02] 94904-80800 BOLT, WASHER HEAD
023. [01] 09024-50210 SCREW, HOLLOW
024. [01] 94901-81020 WASHER, COPPER PLA
025. [01] 09024-40080 SCREW, AIR BLEEDER
026. [02] 09024-10010 WASHER, AIR BLEEDE
027. [01] 94918-10150 NIPPLE, SWIVELING

Include in #3:

09450-02510 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-02510  35430-163-  PUMP ASSY, INJECTI
35430-163-20A    KAWASAKI PUMP ASSY, INJECTI




Information:

Illustrations show fuel injection pump housing and governor removed from engines. Service work can be done with it installed on engine. 1. Remove the flange (1) and flange assembly (2) from the cover (3).2. Remove the cover from the pump housing by removing seven bolts. 3. Remove the solenoid (4) from the cover.4. Remove cover (6).5. Remove two bolts (5) that hold the cover to the shutoff housing. 6. Remove the cover from the shutoff housing (7). 7. Remove the lever (10) from the shaft (11).8. Remove the shaft (9) from the shutoff housing.9. Remove the lever (8) from the shaft (11).10. Remove the shaft (11) from the shutoff housing.11. Remove the seal (12) from the shutoff housing.Install Shutoff Housing
1. Put 5S1454 Sealing Compound on the outside diameter of the seal and install the seal (1) with tooling (A) in the shutoff housing with the lip toward the outside. The outer face of the seal must be .039 in. (1.0 mm) below the surface of the housing. Remove the extra sealing compound from the housing and the seal after installation. 2. Install the shaft (3) in the shutoff housing.3. Install the lever (5) on the shaft (3).4. Install shaft (2) in the shutoff housing.5. Install the lever (4) on shaft (3). 6. Put the cover (6) in position on the shutoff housing and install two bolts that hold the cover to the housing. 7. Install the cover (8).8. Install the solenoid (7) on the cover.9. Install the cover (6) on the pump housing.10. Install the flange assembly and the flange on the cover.

Have questions with 09450-02510?





09450-02500 PUMP ASSY, INJECTI 09450-02491 09450-02480 09450-02470 09450-02460
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-02510

Back to top