Fuel injectors
  1. Home
  2. denso
  3. #09450-02240

09450-02240 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935001660
09450-02240 PUMP ASSY, INJECTI
Rating:
2
Buy PUMP ASSY, INJECTI 09450-02240 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-02240

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-02240 PUMP ASSY, INJECTI MM413214
005. [01] 09011-02420 HOUSING SUB-ASSY, MM501253
006. [04] 09013-10280 HOLDER, DELIVERY V MM501075
006. [04] 09013-10520 HOLDER, DELIVERY V MM501507
007. [04] 09013-60540 SPRING, DELIVERY V MM501161
008. [04] 09013-70130 GASKET, DELIVERY V MM501856
008. [04] 09013-70061 GASKET, DELIVERY V P720-16141
009. [04] 09014-00790 VALVE SUB-ASSY, IN MM501046
010. [04] 09015-02860 ELEMENT SUB-ASSY, MM501384
011. [04] 09016-10210 SLEEVE, PLUNGER CO MM500229
012. [04] 09016-30082 SEAT, SPRING, UPR MM501098
013. [04] 09016-40170 SPRING, PUMP PLUNG MM500360
014. [04] 09017-00170 TAPPET SUB-ASSY,IN MM500230
014-001. [04] 09017-10022 TAPPET, INJECTION
014-002. [04] 09217-60010 ROLLER, FEED PUMP ME702227
014-003. [04] 09017-60020 PIN, INJECTION PUM P720-1429
015. [04] 09018-30050 PIN, INJECTION PUM MM500231
016. [01] 09021-00440 RACK ASSY, CONTROL MM501255
017. [04] 09030-10060 SEAT, SPRING, LWR MM500316
018. [02] 09046-70030 PLATE MM500232
019. [ C] 09031-10310 PLATE, TAPPET ADJU MM501365
019. [ C] 09031-10300 PLATE, TAPPET ADJU MM501364
019. [ C] 09031-10280 PLATE, TAPPET ADJU MM501246
019. [ C] 09031-10170 PLATE, TAPPET ADJU P760-15160
019. [ C] 09031-10160 PLATE, TAPPET ADJU MM500314
019. [ C] 09031-10140 PLATE, TAPPET ADJU MM500312
019. [ C] 09031-10130 PLATE, TAPPET ADJU MM500311
019. [ C] 09031-10120 PLATE, TAPPET ADJU MM500310
019. [ C] 09031-10110 PLATE, TAPPET ADJU MM500309
019. [ C] 09031-10010 PLATE, TAPPET ADJU ME702559
020. [01] 94901-81020 WASHER, COPPER PLA ME022309
021. [01] 09314-10170 NIPPLE, OIL LEAKAG MM500909
022. [01] 94918-00310 SCREW, HOLLOW ME702236
023. [03] 09006-80020 PLATE, ADJUSTING MM514109
023. [03] 09007-00012 PLATE ASSY, ADJUST MM501077
024. [02] 94904-71980 BOLT, W/WASHER MM501244
024. [02] 94904-80800 BOLT, WASHER HEAD
025. [01] 09055-40300 SPRING, DIAPHRAGM MM501256
026. [01] 09055-40160 SPRING, DIAPHRAGM MM501073
027. [04] 90802-20150 O-RING MM500438
028. [01] 09089-40020 E-RING ME702639
030. [01] 09089-40010 E-RING ME702112
031. [ C] 09021-92500 STOPPER MM501257
031. [ C] 09021-92510 STOPPER MM501258
031. [ C] 09021-92520 STOPPER MM501259
031. [ C] 09021-92530 STOPPER MM501260
031. [ C] 09021-92540 STOPPER MM501275
032. [ C] 09021-92800 STOPPER
032. [ C] 09021-92790 STOPPER
032. [ C] 09021-92780 STOPPER
032. [ C] 09021-92770 STOPPER
032. [ C] 09021-92760 STOPPER
032. [ C] 09021-92750 STOPPER
032. [ C] 09021-92740 STOPPER
032. [ C] 09021-92730 STOPPER
032. [ C] 09021-92720 STOPPER
032. [ C] 09021-92810 STOPPER

Include in #3:

09450-02240 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-02240  MM413214  PUMP ASSY, INJECTI
MM413214    MITSUBISHI PUMP ASSY, INJECTI




Information:

1. Disconnect fuel line (3) from the fuel transfer pump. Cap or plug immediately.2. Disconnect fuel line (4) from the fuel transfer pump. Cap or plug immediately.3. Remove bolts (1).4. Remove fuel transfer pump (2). Check the condition of the O-ring seal on the fuel transfer pump. If necessary, make a replacement. Put clean engine oil on the O-ring seal when assembling fuel transfer pump. For installation of the fuel transfer pump, reverse the removal steps.Disassemble & Assemble Fuel Transfer Pump
Start By:a. remove fuel transfer pump 1. Remove seal (1) from the fuel transfer pump.
Cover (2) is under spring tension. Remove the bolts that hold cover (2) slowly to prevent injury.
2. Remove bolts (3) and cover (2) the housing. 3. Remove seals (4) and valve (5) from cover (2). 4. Remove spring (6) from the piston.
Mark the orientation of valve (8) as to its location in the housing.
5. Remove washer (7) and valve (8) from the housing. 6. Remove piston (9) and sleeve (10) from the housing. 7. Remove seal (11) from sleeve (12). 8. Remove guide and tappet assembly (13) from the housing. 9. Remove seal (14) from guide (15).
If tappet (17) or guide (15) are damaged or worn, they must be replaced as a unit.
10. Remove ring (16) from tappet (17) and the tappet from guide (15). 11. Remove the bolts and cover (18) from the housing. 12. Remove seal (19) from cover (18). 13. Remove valve (20) from the housing. The following steps are for the assembly of the fuel transfer pump.14. Install valve (20) in the housing. Put clean fuel on seal (19) and install it on cover (18). Install the cover on the housing.15. Install tappet (17) in guide (15). Install ring (16) on tappet (17) to hold the tappet in the guide.16. Put clean fuel on seal (14) and install it on the guide and tappet assembly (13). Install guide and tappet assembly (13) in the housing.17. Put clean fuel on seal (11) and install it on sleeve (12). Install sleeve (12) in the housing.18. Install piston (9) in the housing. Install valve (8) and washer (7) in the housing. Install spring (6) in the piston.19. Install valve (5) in cover (2).20. Put clean fuel on seals (4) and put them in position on cover (2). Install cover (2) on the housing.21. Put seal (1) in position on the fuel transfer pump.End By:a. install fuel transfer pump

Have questions with 09450-02240?





09450-02230 PUMP ASSY, INJECTI 09450-02221 09450-02212 09450-02210 09450-02200
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-02240

Back to top