Fuel injectors
  1. Home
  2. denso
  3. #09450-02212

09450-02212 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

09450-02212 PUMP ASSY, INJECTI
Rating:
21
Buy PUMP ASSY, INJECTI 09450-02212 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-02212
001. PUMP ASSY, INJECTI 09450-02212

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-02210 PUMP ASSY, INJECTI 14601-51011
000. [01] 09450-02212 PUMP ASSY, INJECTI 14601-51012
005. [02] 09013-10520 HOLDER, DELIVERY V
005. [02] 09013-00350 HOLDER SUB-ASSY, D
005. [02] 09013-00650 HOLDER SUB-ASSY, D
006. [02] 09013-60230 SPRING, DELIVERY V 15221-51231
007. [02] 90802-20150 O-RING 14611-51201
008. [02] 09013-70061 GASKET, DELIVERY V 15221-51241
008. [02] 09013-70130 GASKET, DELIVERY V 11420-51241
009. [02] 09014-00620 VALVE SUB-ASSY, IN 15271-51031
010. [02] 09015-04250 ELEMENT SUB-ASSY, 14601-51051
010. [02] 09015-01540 ELEMENT SUB-ASSY, 15271-51051
011. [02] 09016-10210 SLEEVE, PLUNGER CO 15221-51382
012. [02] 09016-30082 SEAT, SPRING, UPR 15221-51271
013. [02] 09016-40170 SPRING, PUMP PLUNG 15221-51281
014. [02] 09030-10060 SEAT, SPRING, LWR 14109-51290
015. [ C] 09031-10170 PLATE, TAPPET ADJU
015. [ C] 09031-10280 PLATE, TAPPET ADJU
015. [ C] 09031-10300 PLATE, TAPPET ADJU
015. [ C] 09031-10310 PLATE, TAPPET ADJU
015. [ C] 09031-10160 PLATE, TAPPET ADJU
015. [ C] 09031-10140 PLATE, TAPPET ADJU
015. [ C] 09031-10130 PLATE, TAPPET ADJU 15221-51491
015. [ C] 09031-10120 PLATE, TAPPET ADJU
015. [ C] 09031-10110 PLATE, TAPPET ADJU
015. [ C] 09031-10010 PLATE, TAPPET ADJU 14109-51301
016. [01] 09046-70030 PLATE 14611-51441
017. [01] 09021-00290 RACK ASSY, CONTROL 15271-51061
018. [01] 09007-00012 PLATE ASSY, ADJUST 14611-51391
018. [01] 09006-80020 PLATE, ADJUSTING 14384-51391
019. [01] 94904-80800 BOLT, WASHER HEAD
019. [01] 94904-71980 BOLT, W/WASHER 15221-91031
020. [01] 94918-00610 SCREW, HOLLOW 14911-51321
021. [02] 09024-10010 WASHER, AIR BLEEDE 15021-51481
022. [02] 09017-00170 TAPPET SUB-ASSY,IN 15221-51071
022-001. [02] 09017-10022 TAPPET, INJECTION 15021-51990
022-002. [02] 09217-60010 ROLLER, FEED PUMP 15109-52931
022-003. [02] 09017-60020 PIN, INJECTION PUM 15021-51970
023. [02] 09018-30050 PIN, INJECTION PUM 14611-51251
024. [01] 09011-01042 HOUSING SUB-ASSY, 15221-51080

Include in #3:

09450-02212 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-02212  14601-5101  PUMP ASSY, INJECTI




Information:

1. Disconnect boost hose (2) at fuel ratio control (1).2. Remove lockwire (3) and the seal from the bolts.3. Remove the two bolts that hold fuel ratio control (1).4. Pull up on the fuel ratio control, and move it toward the front of the engine so the valve on the fuel ratio will disengage with the groove (slot) in the governor collar. Remove the fuel ratio control and gasket. The following steps are for installation of the fuel ratio control.5. Install a new gasket on fuel ratio control (1).6. Engage valve (4) with the groove (slot) in collar (5) for the governor.7. Install the bolts that hold fuel ratio control (1) to the governor plate.8. Connect boost hose (2) to the fuel ratio control.9. Install new lockwire (3) and seal. See Fuel Rack Setting in Testing And Adjusting.10. Lower the hoods.Disassemble Fuel Ratio Control
Start By:a. remove fuel ratio control The illustrations which follow show a different design fuel ratio control. However, the service procedure is the same. 1. Remove two bolts (1) and cover (2). 2. Remove valve assembly (3).3. Remove seal (4) and the O-ring seal from the valve assembly.4. Remove retainer (5) and two springs (6). 5. Remove the three bolts from the cover. Remove cover (12) and gasket (11).6. Remove valve (13), diaphragm (8), retainer (9) and spring (10).7. Remove pin (14) from valve (13).8. Remove cover (7) from the valve.Assemble Fuel Ratio Control
The illustrations which follow show a different design fuel ratio control. However, the service procedure is the same. 1. Put clean SAE 30 Oil on the seal. Install seal (1) in cover (2) with the lip of the seal toward the inside of the cover. 2. Install valve (3) in cover (2).3. Install the pin that holds the cover on the valve. 4. Install the spring and the retainer in cover (6).5. Install diaphragm (5) on valve assembly (4) and in the cover.6. Install cover (8). Install three bolts (7) that hold the cover in position. 7. Put clean SAE 30 Oil on the seal and the ring seal. Install seals (11) on the valve.8. Install two springs (12), retainer (13) and valve assembly (10).9. Install housing (9) and the bolts.
Correct adjustment must be made to fuel ratio control before installation. See the topic "Adjustment Of Air Fuel Ratio Control" in Testing & Adjusting.
End By:a. install fuel ratio control

Have questions with 09450-02212?





09450-02210 PUMP ASSY, INJECTI 09450-02200 09450-02190 09450-02180 09450-02170
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-02212

Back to top