Fuel injectors
  1. Home
  2. denso
  3. #09450-02010

09450-02010 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935001660
09450-02010 PUMP ASSY, INJECTI
Rating:
17
Buy PUMP ASSY, INJECTI 09450-02010 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-02010

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-02010 PUMP ASSY, INJECTI MM402948
005. [02] 09013-10280 HOLDER, DELIVERY V MM501075
006. [01] 09011-01441 HOUSING SUB-ASSY, MM500225
007. [02] 09013-60480 SPRING, DELIVERY V MM501047
008. [02] 09013-70061 GASKET, DELIVERY V P720-16141
008. [02] 09013-70130 GASKET, DELIVERY V MM501856
009. [02] 09014-00410 VALVE SUB-ASSY, IN MM500227
010. [02] 09015-02011 ELEMENT SUB-ASSY, MM501154
011. [02] 09016-10210 SLEEVE, PLUNGER CO MM500229
012. [02] 09016-30082 SEAT, SPRING, UPR MM501098
013. [02] 09016-40170 SPRING, PUMP PLUNG MM500360
014. [02] 09030-10060 SEAT, SPRING, LWR MM500316
015. [ C] 09031-10310 PLATE, TAPPET ADJU MM501365
015. [ C] 09031-10300 PLATE, TAPPET ADJU MM501364
015. [ C] 09031-10170 PLATE, TAPPET ADJU P760-15160
015. [ C] 09031-10160 PLATE, TAPPET ADJU MM500314
015. [ C] 09031-10140 PLATE, TAPPET ADJU MM500312
015. [ C] 09031-10130 PLATE, TAPPET ADJU MM500311
015. [ C] 09031-10120 PLATE, TAPPET ADJU MM500310
015. [ C] 09031-10110 PLATE, TAPPET ADJU MM500309
015. [ C] 09031-10010 PLATE, TAPPET ADJU ME702559
016. [02] 09017-00170 TAPPET SUB-ASSY,IN MM500230
016-001. [02] 09017-10022 TAPPET, INJECTION
016-002. [02] 09217-60010 ROLLER, FEED PUMP ME702227
016-003. [02] 09017-60020 PIN, INJECTION PUM P720-1429
017. [02] 09018-30050 PIN, INJECTION PUM MM500231
018. [01] 09046-70030 PLATE MM500232
019. [01] 09021-00281 RACK ASSY, CONTROL MM500277
020. [01] 09022-20080 WASHER, FUEL PIPE ME702235
021. [01] 09024-40180 SCREW, AIR BLEEDER MM501152
022. [01] 09024-50210 SCREW, HOLLOW MM501320
024. [01] 94904-71980 BOLT, W/WASHER MM501244
024. [01] 94904-80800 BOLT, WASHER HEAD
026. [01] 09006-80020 PLATE, ADJUSTING MM514109
026. [01] 09007-00012 PLATE ASSY, ADJUST MM501077
027. [01] 09055-40230 SPRING, DIAPHRAGM MM501177
028. [01] 90400-16101 PIN, SPLIT MM500431
029. [02] 90802-20150 O-RING MM500438
030. [ C] 94901-34040 WASHER, PLATE, SK ME022485
030. [ C] 94901-34030 WASHER, PLATE, SK ME022517
030. [ C] 94901-34020 WASHER, PLATE, SK ME728059
030. [ C] 94901-33880 WASHER, PLATE, SK ME022484
031. [ C] 09021-92180 STOPPER
031. [ C] 09021-92170 STOPPER
031. [ C] 09021-92160 STOPPER
031. [ C] 09021-92150 STOPPER
031. [ C] 09021-92140 STOPPER
031. [ C] 09021-92130 STOPPER
031. [ C] 09021-92120 STOPPER
031. [ C] 09021-92110 STOPPER
031. [ C] 09021-92100 STOPPER
031. [ C] 09021-92190 STOPPER

Include in #3:

09450-02010 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-02010  MM402948  PUMP ASSY, INJECTI
MM402948    MITSUBISHI PUMP ASSY, INJECTI




Information:

Flangeless Liners
(1) Outside diameter of cylinder liner ... 103.28 to 103.30 mm (4.066 to 4.067 in)(2) Inside diameter of cylinder liner ... 98.48 to 98.50 mm (3.877 to 3.878 in) Maximum diameter wear (when boring or new liners are needed) ... 0.20 mm (0.008 in)Interference fit of liner in cylinder block ... 0.08 to 0.13 mm (0.003 to 0.005 in)Length of cylinder liner ... 228.73 to 228.98 mm (9.005 to 9.015 in)Maximum cylinder liner can be bored (made larger than original size) ... 0.76 mm (0.030 in) The 4.236 flangeless cylinder liners are the only ones that can be bored. All other liners must be replaced when worn beyond specifications.(3) Liner projection (height of liner above face of cylinder block) ... 0.71 to 0.94 mm (0.028 to 0.037 in)(4) Diameter of parent bore in cylinder block for liner ... 103.162 to 103.188 mm (4.0615 to 4.0625 in)Flanged Liners
New cylinder blocks have been introduced on the 4.236 engine. The 4.236 engine has a larger cylinder liner parent bore diameter and the outside diameter of the cylinder liner is also larger. The liners will no longer have a flame ring. Effective with this change only flanged liners will be available. The change became effective at engine serial number LDU106654N and up. See General Information in Systems Operation for the serial number location.(1) Outside diameter of cylinder liner.Earlier engines with thin wall liners: Production liner ... 103.238 to 103.264 mm (4.0645 to 4.0655 in)Service liner ... 103.188 to 103.213 mm (4.0625 to 4.0635 in)Current engines with thick wall liners: Production liner ... 104.254 to 104.280 mm (4.1045 to 4.1055 in)Service liner ... 104.204 to 104.229 mm (4.1025 to 4.1035 in)(2) Inside diameter of cylinder liner: Production liner ... 98.48 to 98.50 mm (3.877 to 3.878 in)Service liner ... 98.50 to 98.53 mm (3.878 to 3.879 in)Maximum diameter wear (when new liners are needed ... 0.20 mm (0.008 in)Transition fit of service liner in cylinder block ... 0.03 mm ( 0.001 in)Length of cylinder liner with flame ring ... 227.10 to 227.43 mm (8.941 to 8.954 in)Length of cylinder liner without flame ring ... 226.03 to 226.82 mm (8.899 to 8.930 in)(3) Liner (flange) projection [do not measure from flame ring (if equipped)] ... 0.10 mm (0.004 in) above to 0.10 mm (0.004 in) below face of cylinder block. Flange thickness of cylinder liner ... 3.81 to 3.86 mm (0.150 to 0.152 in)(4) Diameter of parent bore in cylinder block in liner: Earlier engines with thin wall liners ... 103.188 to 103.213 mm (4.0625 to 4.0635 in)Current engines with thick wall liners ... 104.204 to 104.229 mm (4.1025 to 4.1035 in)Depth of recess for cylinder liner flange ... 3.81 to 3.91 mm (0.150 to 0.154 in)All Engine Blocks
(5) Diameter of bore in cylinder block for camshaft No. 1 front bearing [has only front bearing (6)] ... 55.563

Have questions with 09450-02010?





09450-02000 PUMP ASSY, INJECTI 09450-01970 09450-01960 09450-01954 09450-01940
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-02010

Back to top