09450-00090 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

PUMP ASSY, INJECTI MA
  • OLD P/N:090000-1872
Nozzle: 0935000530
09450-00090 PUMP ASSY, INJECTI
Rating:
20
Buy PUMP ASSY, INJECTI 09450-00090 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-00090

Scheme ###:

000. [01] 09450-00090 PUMP ASSY, INJECTI 15108-51013
001. [01] 09011-00541 HOUSING SUB-ASSY, 15108-51060
001. [01] 09011-00542 HOUSING SUB-ASSY, 15108-51060
005. [01] 09013-10040 HOLDER, DELIVERY V 15021-51221
006. [01] 09004-70020 NUT, NIPPLE 15021-51451
007. [02] 09005-80020 WASHER, NIPPLE 15021-51461
008. [01] 09005-90020 NIPPLE, DELIVERY V 15021-51441
009. [01] 09013-60020 SPRING, DELIVERY V 14205-51230
010. [01] 09014-00030 VALVE SUB-ASSY, IN 15021-51031
011. [01] 09013-70020 GASKET, DELIVERY V 15021-51241
012. [01] 09015-00611 ELEMENT SUB-ASSY, 15108-51051
012. [01] 09015-00610 ELEMENT SUB-ASSY, 15108-51051
013. [01] 09016-10110 SLEEVE, PLUNGER CO 14109-51390
014. [01] 09016-30082 SEAT, SPRING, UPR 15221-51271
015. [01] 09016-40041 SPRING, PUMP PLUNG 14109-51280
016. [01] 09030-10060 SEAT, SPRING, LWR 15021-51291
017. [1C] 09031-10310 PLATE, TAPPET ADJU
017. [1C] 09031-10300 PLATE, TAPPET ADJU
017. [1C] 09031-10170 PLATE, TAPPET ADJU
017. [1C] 09031-10160 PLATE, TAPPET ADJU
017. [1C] 09031-10140 PLATE, TAPPET ADJU
017. [1C] 09031-10130 PLATE, TAPPET ADJU 15221-51491
017. [1C] 09031-10120 PLATE, TAPPET ADJU
017. [1C] 09031-10110 PLATE, TAPPET ADJU
017. [1C] 09031-10010 PLATE, TAPPET ADJU 14109-51301
018. [01] 09017-00170 TAPPET SUB-ASSY,IN 15221-51071
018-001. [01] 09017-10022 TAPPET, INJECTION 15021-51990
018-002. [01] 09017-60020 PIN, INJECTION PUM 15021-51970
018-003. [01] 09217-60010 ROLLER, FEED PUMP 15109-52931
019. [01] 09018-30010 PIN, INJECTION PUM 14109-51250
020. [01] 09018-40060 RING, CLAMP
021. [01] 09021-00140 RACK ASSY, CONTROL 15108-51260
022. [01] 09024-50012 SCREW, HOLLOW 15021-51321
023. [01] 94901-81020 WASHER, COPPER PLA 15221-96661
024. [01] 09024-40080 SCREW, AIR BLEEDER 15221-51351
025. [02] 09024-10010 WASHER, AIR BLEEDE 15221-96651

Include in #3:

09450-00090 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-00090  15108-5101  PUMP ASSY, INJECTI
15108-51013    KUBOTA PUMP ASSY, INJECTI




Information:

Fuel Tank Lifting
The fuel tank lifting warning sign is located on the fuel tank.
Drain fuel tank before lifting unit. Lifting this unit when fuel is present in the tank could result in separation of the tank from the base and cause personal injury or death.
Clutch
The clutch warning label may be located on the clutch housing (if equipped). Rotating gears-finger or hand entanglement. Do not service until reading the operator's manual.Lifting the Generator Set
The warning label for lifting the generator set is located on the rail.
Improper lift rigging can allow load to tumble causing injury and damage. 1. Use adequate spreader bar as described because center of gravity is above base lift points.2. Attach four properly rated chains from base lift holes to spreader bar.3. Adjust chain lengths to position spreader bar over center symbol for level lift.4. Use single point center lift arch and 5N2171 Instruction Film when present.
Jumper Cable Connections
The warning label for jumper cable connections is located near the batteries.
Improper jumper cable connections can cause an explosion resulting in personal injury.Batteries may be located in separate compartments. When using jumper cables, always connect positive (+) cable to positive (+) terminal of battery connected to starter solenoid and negative (-) cable from external source to starter negative (-) terminal (if machine not equipped with starter negative terminal, connect to engine block.) Follow procedure in the operation manual.
Electrical Shock
The warning label for electrical shock is located on the control panel. High voltage can cause electrical shocks. Electrical shocks can cause personal injury or death. Avoid contacting electrical components or wiring.General Hazard Information
Attach a DO NOT OPERATE or similar warning tag to the start switch or controls before performing maintenance or repairing the engine. These tags, SEHS7332, are available from your Caterpillar dealer. When appropriate, attach the tags at the engine and at each operator's position. Disconnect starting controls when appropriate. Do not allow unauthorized personnel on, around or in the engine unit when it is being serviced.Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well ventilated area and, if in an enclosed area, vent the exhaust to the outside.Use caution when removing filler cap, grease fittings, pressure taps, breathers or drain plugs. Hold a rag over the cap or plug to prevent being sprayed or splashed by liquids under pressure.* Wear a hard hat, protective glasses, hearing protection and other protective equipment as required by job conditions.* Do not wear loose clothing or jewelry that can catch on controls or other parts of the engine.* Make certain all protective guards and covers are secured in place.* Use all cleaning solutions with care.* Never put maintenance fluids into glass containers since glass containers can break.* Report all needed repairs.UNLESS INSTRUCTED DIFFERENTLY, PERFORM ALL MAINTENANCE AS FOLLOWS:* Stop the engine.* Ensure the protective locks or controls are in the applied position.* Disconnect the batteries whenever performing any maintenance or before servicing the electrical system. If the

Have questions with 09450-00090?





Group cross 09450-00090

Back to top