Fuel injectors
  1. Home
  2. denso
  3. #09420-00291

09420-00291 PUMP ASSY, FUEL FE Denso Cross


 

Information pump assy, fuel fe

09420-00291 PUMP ASSY, FUEL FE
Rating:
11
Buy PUMP ASSY, FUEL FE 09420-00291 genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP ASSY, FUEL FE
000. [01] 09420-00291 PUMP ASSY, FUEL FE
001. [01] 09421-00070 HOUSING SUB-ASSY,
002. [01] 09423-10050 CASING, FEED PUMP
003. [01] 09423-00040 PUMP SUB-ASSY, FUE
004. [01] 09424-10040 PLATE, FEED PUMP S
005. [01] 09424-40040 PLATE, FEED PUMP S
006. [01] 09425-10050 COVER, FEED PUMP
007. [04] 09408-20040 SCREW, SUPPLY PUMP
008. [01] 09408-60200 O-RING, SUPPLY PUM
009. [01] 09408-70050 SEAL, SUPPLY PUMP
010. [01] 09420-50030 KEY
010. [01] 09420-50060 KEY
011. [02] 09212-40010 SPRING, FEED PUMP S2256-21020-A
012. [02] 09212-10011 VALVE, FEED PUMP C S2256-31041-A
013. [01] 09212-60010 PLUG, FEED PUMP CH S2284-51350-A
014. [01] 09213-00340 PUMP SUB-ASSY, PRI S2250-91310-A
014-001. [01] 09211-70120 CONNECTOR
014-002. [01] 09212-50010 GASKET, CHECK VALV S2284-71680-A
014-003. [01] 09213-00360 PUMP SUB-ASSY, PRI S2250-91370-A
015. [03] 09212-50010 GASKET, CHECK VALV S2284-71680-A
016. [02] 09031-70060 PLUG, SCREW S2284-51060-A
017. [02] 94901-81500 WASHER, COPPER PLA S2284-71120-A
018. [04] 94904-43320 BOLT S2281-52070-A
019. [04] 94901-02490 WASHER S2287-71100-A
020. [01] 94918-00310 SCREW, HOLLOW S2283-51310-A
022. [01] 09024-50440 SCREW, HOLLOW
023. [01] 09222-00040 FILTER, FEED PUMP S2257-41040-A
024. [01] 09222-30070 SCREW, FUEL PIPE H S2283-51370-A
025. [01] 09212-70100 SUPPORT, VALVE

Include in #3:

09400-00375 as PUMP ASSY, FUEL FE
09420-00291

Cross reference number



Part num Firm num Firm Name
09420-00291    PUMP ASSY, FUEL FE




Information:

Remove And Install Water Pump
Start By:a. remove radiator 1. Remove the four bolts and remove fan blade (1) and extension. 2. Loosen bolts (2) and remove fan belt (4). Loosen clamps (3) and disconnect the two hoses. Remove nut (5) from water pump fan pulley (6). 3. Install tooling (A) and remove fan pulley (6). 4. Remove four bolts (7) and remove the water pump and gasket. At the time of assembly, tighten nut (5) to the torque of 80 N m (60 lb.ft.) Install in the reverse order.Disassemble Water Pump
Start By:a. remove water pump 1. Remove key (1) from the shaft. 2. Remove pump housing (2) from the rear housing. 3. Remove snap ring (3) with tool (A). 4. Put the water pump housing in position on a press. Install tool (B) and remove the shaft assembly from the impeller and water pump housing. 5. Remove seals (4) from the water pump housing if they are damaged. 6. Put shaft assembly (5) in position in a press. Install tool (B) and remove bearings (6) and spacer (7) from the shaft.Assemble Water Pump
1. Put one of the shaft's bearings in position in a press. Make sure there is support for the inner race of the bearing. Push shaft (1) on to bearing (2). 2. Install spacer (4) on the shaft. Put second bearing (3) in position and push the shaft on to it. 3. Install seal (6) and flange (5) in the water pump housing. 4. Put 2S3230 Bearing Lubricant on the bearings. Put the water pump housing in position on a press and install shaft assembly (7) in the housing. 5. Install snap ring (8) over the bearings with tool (A). 6. Install the water seal in the housing with tooling (B). 7. Install seal (9) on the shaft assembly. 8. Install impeller (10) on the shaft with tooling (C) and a press. The clearance between the impeller blade and pump body must be 0.30 to 0.81 mm (.012 to .032 in). 9. Install a new gasket on water pump housing (12). Install housing (12) on the rear housing with nuts (11) that hold it. 10. Install key (13) in the shaft.End By:a. install water pump

Have questions with 09420-00291?





09420-00360 PUMP ASSY, FUEL FE 09420-00281 09420-00272 09420-00271 09420-00261
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09420-00291

Back to top