Fuel injectors
  1. Home
  2. denso
  3. #09410-00183

09410-00183 BODY ASSY, SUPPLY Denso Cross


 

Information body assy, supply

09410-00183 BODY ASSY, SUPPLY
Rating:
2
Buy BODY ASSY, SUPPLY 09410-00183 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, SUPPLY
000. [01] 09410-00183 BODY ASSY, SUPPLY
001. [01] 09411-00140 HOUSING SUB-ASSY,
002. [02] 09413-10020 HOLDER, DELIVERY V
003. [02] 09413-30020 STOPPER, DELIVERY
004. [02] 09408-60090 O-RING, SUPPLY PUM
005. [02] 09013-61252 SPRING, DELIVERY V
006. [02] 09413-70010 GASKET, DELIVERY V
007. [02] 09414-00021 VALVE SUB-ASSY, SU
008. [02] 09415-00192 ELEMENT SUB-ASSY,
008. [02] 09415-00250 ELEMENT SUB-ASSY,
009. [06] 09408-60100 O-RING, SUPPLY PUM
010. [04] 94901-35880 WASHER, PLATE, SK 22885-2290A
011. [04] 92156-08081 NUT, FLANGE
012. [02] 09416-20040 SEAT, SPRING, UPR
013. [02] 09416-40010 SPRING, PUMP PLUNG
014. [02] 09416-50021 SEAT, SPRING, LWR
015. [02] 09417-00032 TAPPET SUB-ASSY, S
015. [02] 09417-00080 TAPPET SUB-ASSY, S
015. [02] 09417-00100 TAPPET SUB-ASSY, S
016. [01] 09419-10131 CAMSHAFT, SUPPLY P
017. [02] 94910-10210 BEARING, ROLLER
018. [01] 09410-40090 COVER, BEARING
019. [01] 94915-03110 SEAL, OIL
020. [01] 09408-60120 O-RING, SUPPLY PUM
021. [2C] 09409-50100 PLATE, BEARING COV
021. [2C] 09409-50130 PLATE, BEARING COV
021. [2C] 09409-50140 PLATE, BEARING COV
021. [2C] 09409-50150 PLATE, BEARING COV
021. [2C] 09409-50160 PLATE, BEARING COV
022. [04] 94904-77010 BOLT, W/WASHER
023. [01] 09408-60110 O-RING, SUPPLY PUM
024. [01] 09408-60130 O-RING, SUPPLY PUM
025. [1C] 09409-30050 WASHER, SUPPLY PUM
025. [1C] 09409-30060 WASHER, SUPPLY PUM
025. [1C] 09409-30070 WASHER, SUPPLY PUM
025. [1C] 09409-30080 WASHER, SUPPLY PUM
026. [02] 09404-00081 OVERHAUL KIT, SUPP
027. [01] 02960-00580 SENSOR ASSY, CRANK 89411-1290A1
027-001. [01] 94914-06310 O-RING
028. [2C] 09409-60050 PLATE, SENSOR SHIM
028. [2C] 09409-60060 PLATE, SENSOR SHIM
028. [2C] 09409-60070 PLATE, SENSOR SHIM
028. [2C] 09409-60080 PLATE, SENSOR SHIM
029. [01] 90200-06081 WASHER, PLATE SZ201-06001
030. [01] 90107-06161 BOLT, HEXAGON 9 010 7061 61
031. [01] 09031-00500 VALVE ASSY, OVERFL S2210-71760-A
032. [05] 94901-02490 WASHER S2287-71100-A
034. [01] 94918-00310 SCREW, HOLLOW S2283-51310-A
035. [02] 94901-02470 WASHER S2284-71900-A
037. [01] 94918-00060 SCREW, HOLLOW S2283-51110-A
039. [01] 94901-81500 WASHER, COPPER PLA S2284-71120-A
040. [01] 09031-70060 PLUG, SCREW S2284-51060-A
041. [02] 94901-02500 WASHER S2284-71920-A
043. [01] 94918-00420 SCREW, HOLLOW S2283-51180-A
044. [4C] 90218-06140 WASHER, PLATE 22867-1650A
044. [4C] 90218-06130 WASHER, PLATE
044. [4C] 90218-06120 WASHER, PLATE
045. [1C] 09020-70020 RING, WEAR 22143-1100A
046. [01] 09020-70100 RING, WEAR
047. [02] 09533-10011 STOPPER, W/GASKET
047. [02] 09533-10020 STOPPER, W/GASKET

Include in #3:

09400-00204 as BODY ASSY, SUPPLY
09400-00294
09410-00183

Cross reference number



Part num Firm num Firm Name
09410-00183    BODY ASSY, SUPPLY




Information:

1. Remove bolt (1), six bolts (2), two top bolts (3), housing (4) and the gasket. 2. Remove governor spring (5), the two wave washers, one flat washer and seat from the guide in the housing. 3. Remove bolts (6), cover (7) and the gasket from the housing. Use tooling (A) to remove seal (8) from the cover. 4. Remove low idle adjustment screw (9) and spring (10) from the housing. 5. Remove shaft assembly (12), lever (11) and lever (13) from the housing. 6. Remove two snap rings from pins (15) and remove pins (15). Remove plates (14) and stop (16) from the shaft assembly. 7. Remove pin (18), pin (17) and spring (19) from the shaft assembly. 8. Remove shaft (20) and lever (21) from the housing.
Remove check valve (22) only if a replacement is necessary because the check valve will be damaged during removal.
9. Remove check valve (22) if a replacement is necessary. 10. Remove contact (23) and body (24) for the governor dashpot adjustment screw from the housing.11. Remove bolts (25), cover (26) and the gasket from the housing. 12. Remove seal (27) and adjustment screw (28) for the high idle. 13. Remove two bolts (29), housing (30) and the gasket from the fuel injection pump housing. 14. Remove bolts (31) and torque control group (32).15. Disassemble the torque control group and inspect the spacer, spring and insulator for damage or wear. 16. Remove bolts (33) and block (34) for the full load stop from the housing. 17. Remove the bolt that holds collar (35) to bolt (37). Remove collar (35), collar (36) and the spring from bolt (37). Remove bolt (37) from the block.18. Remove the stop screws from collar (35) if a replacement is necessary. 19. Remove bolts (39) and governor servo (38) from the fuel injection pump. 20. Remove lockring (44), seat (43), spring (broken link spring) (42) and sleeve (41) from valve (40). Remove the other lockring (44) from the groove in the center of valve (40). 21. Remove valve (40), sleeve (45) and piston (47) from the governor servo. Remove the O-ring seal from sleeve (45).22. Remove pin (46) and lever (48) from the governor servo. 23. Use tool (B) to hold spring (50) in compression so ring (49) can be removed. Spring (50) is used to put a preload on the thrust bearing for the camshaft in the fuel injection pump housing.24. Remove ring (49) then remove tool (B).25. Remove bearing (51), sleeves (52) and spring (50) from the governor shaft. 26. Remove ring (53) and dashpot assembly (54) from the governor shaft. 27. Use tool (C) to remove snap ring (60) from seat (57). Remove ring (59) and spool (58) from seat (57).28. Remove seat (57) from spring (56) and remove spring (56) from seat (55). 29. Remove spring (overfueling spring) (61) and riser (62) from the governor shaft. 30. Remove ring (63), races (64) and bearing (65) from the riser. 31. Use a screwdriver to remove

Have questions with 09410-00183?





19010-02030 BODY ASSY, INJECTI 19010-02020 19010-02010 19010-02000 19010-01990
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09410-00183

Back to top