Fuel injectors
  1. Home
  2. denso
  3. #09410-00116

09410-00116 BODY ASSY, SUPPLY Denso Cross


 

Information body assy, supply

09410-00116 BODY ASSY, SUPPLY
Rating:
9
Buy BODY ASSY, SUPPLY 09410-00116 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, SUPPLY
000. [01] 09410-00115 BODY ASSY, SUPPLY
001. [01] 09411-00081 HOUSING SUB-ASSY,
002. [02] 09413-10020 HOLDER, DELIVERY V
003. [02] 09413-30020 STOPPER, DELIVERY
004. [02] 09408-60090 O-RING, SUPPLY PUM
005. [02] 09013-61252 SPRING, DELIVERY V
006. [02] 09413-70010 GASKET, DELIVERY V
007. [02] 09414-00021 VALVE SUB-ASSY, SU
008. [02] 09415-00192 ELEMENT SUB-ASSY,
008. [02] 09415-00270 ELEMENT SUB-ASSY,
009. [06] 09408-60100 O-RING, SUPPLY PUM
010. [04] 94901-35880 WASHER, PLATE, SK
011. [04] 92156-08081 NUT, FLANGE
012. [02] 09416-20040 SEAT, SPRING, UPR
013. [02] 09416-40010 SPRING, PUMP PLUNG
014. [02] 09416-50021 SEAT, SPRING, LWR
015. [02] 09417-00032 TAPPET SUB-ASSY, S
015. [02] 09417-00080 TAPPET SUB-ASSY, S
015. [02] 09417-00100 TAPPET SUB-ASSY, S
016. [01] 09419-10112 CAMSHAFT, SUPPLY P
017. [02] 94910-10210 BEARING, ROLLER
017. [02] 94910-10230 BEARING, ROLLER
018. [01] 09410-40080 COVER, BEARING
019. [01] 94915-03110 SEAL, OIL
020. [01] 09408-60120 O-RING, SUPPLY PUM
021. [2C] 09409-50100 PLATE, BEARING COV
021. [2C] 09409-50130 PLATE, BEARING COV
021. [2C] 09409-50140 PLATE, BEARING COV
021. [2C] 09409-50150 PLATE, BEARING COV
021. [2C] 09409-50160 PLATE, BEARING COV
022. [04] 94904-77040 BOLT, W/WASHER
023. [01] 09408-60110 O-RING, SUPPLY PUM
024. [01] 09408-60130 O-RING, SUPPLY PUM
025. [1C] 09409-30050 WASHER, SUPPLY PUM
025. [1C] 09409-30060 WASHER, SUPPLY PUM
025. [1C] 09409-30070 WASHER, SUPPLY PUM
025. [1C] 09409-30080 WASHER, SUPPLY PUM
026. [02] 09404-00081 OVERHAUL KIT, SUPP
027. [01] 02960-00580 SENSOR ASSY, CRANK
027-001. [01] 94914-06310 O-RING
028. [2C] 09409-60050 PLATE, SENSOR SHIM
028. [2C] 09409-60060 PLATE, SENSOR SHIM
028. [2C] 09409-60070 PLATE, SENSOR SHIM
028. [2C] 09409-60080 PLATE, SENSOR SHIM
029. [01] 90200-06081 WASHER, PLATE
030. [01] 90107-06161 BOLT, HEXAGON
031. [01] 09031-00280 VALVE ASSY, OVERFL
032. [04] 09022-20070 WASHER, FUEL PIPE 16635Z6002
034. [01] 94918-00310 SCREW, HOLLOW 16753Z6002
037. [01] 94918-00060 SCREW, HOLLOW
039. [01] 94901-81500 WASHER, COPPER PLA
040. [01] 09031-70060 PLUG, SCREW
043. [01] 94918-00420 SCREW, HOLLOW
044. [4C] 90218-06140 WASHER, PLATE
044. [4C] 90218-06130 WASHER, PLATE
044. [4C] 90218-06120 WASHER, PLATE
045. [1C] 09020-70020 RING, WEAR
046. [01] 09020-70100 RING, WEAR
047. [02] 09533-10011 STOPPER, W/GASKET
047. [02] 09533-10020 STOPPER, W/GASKET

Include in #3:

09400-00133 as BODY ASSY, SUPPLY

Cross reference number



Part num Firm num Firm Name
09410-00116    BODY ASSY, SUPPLY




Information:

Disassemble Rocker Shaft
Start By:a. remove rocker shaft and push rods 1. Remove circlip (1) and the washer from each end of the rocker shaft. 2. Put identification marks on the rocker arms, brackets and springs as to their location on the rocker shaft. Remove rocker arms (2), brackets (3) and springs (4) from each side of the rocker shaft.3. Remove screw (5) and rocker shaft oil feed connection (6). 4. Remove nut (7) and adjusting screw (8) from the rocker arm.5. Measure the bore of the bearings in each of the rocker arms. The bore must be 19.06 to 19.10 mm (.7505 to .7520 in.).6. Measure the diameter of the rocker shaft at each of the rocker arm locations. The diameter must be 19.01 to 19.04 mm (.7485 to .7495 in.). The maximum permissible clearance between the rocker arm bearings and shaft is 0.13 mm (.005 in.).7. If a replacement is needed, remove bushing (9) with tooling (A) and a press.Assemble Rocker Shaft
1. If a replacement was needed, make an alignment of oil hole (1) in the bushing with the oil hole in the rocker arm. Install new bushing (3) in the rocker arm with tooling (A) and a press. Check the bore dimension of the bushing in the rocker arm after installation. It must be 19.06 to 19.10 mm (.7505 to .7520 in.).
Do not turn the adjusting screw too far into the rocker arms. Damage to the valve can be the result after the rocker shaft and push rods have been installed in the engine.
2. Install adjusting screw (4) and nut (2) in the rocker arm. 3. Slide oil feed connection (9) on the rocker shaft. Install bolt (5) that holds it in place.4. Install springs (6), brackets (7) and rocker arms (8) in their original positions. 5. Install washer (11) and circlip (10) on each end of the rocker shaft.End By:a. install rocker shaft and push rods

Have questions with 09410-00116?





19010-02030 BODY ASSY, INJECTI 19010-02020 19010-02010 19010-02000 19010-01990
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09410-00116

Back to top