Information pump assy, supply
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
094000-0565 8-98013910-5 Fuel Injection Pump Replacement for Isuzu Diesel Engine 6WG1
WZCPSM Product Name:Fuel Injection Pump || Product Number: 094000-0565 8-98013910-5 || Application:Replacement for Isuzu Diesel Engine 6WG1 || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
WZCPSM Product Name:Fuel Injection Pump || Product Number: 094000-0565 8-98013910-5 || Application:Replacement for Isuzu Diesel Engine 6WG1 || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
8-98013910-5 094000-0565 Fuel Injection Pump Compatible with Isuzu Diesel Engine 6WG1
OfkZynodor Product name:Fuel Injection Pump || Part Number:094000-0565 8-98013910-5 || APPlication:Compatible with Cummins 6CT8.3 6CTAA8.513 Diesel Engine || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
OfkZynodor Product name:Fuel Injection Pump || Part Number:094000-0565 8-98013910-5 || APPlication:Compatible with Cummins 6CT8.3 6CTAA8.513 Diesel Engine || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
Compatible with Isuzu Diesel Engine 6WG1 Fuel Injection Pump 094000-0565 8-98013910-5
KoovDem Part Number： 094000-0565 8-98013910-5 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Part Name: Fuel Injection Pump || The 6WG1 engine is a durable and powerful option for heavy-duty commercial vehicles and machinery, offering strong torque, efficient fuel consumption, and reliable operation in challenging conditions. Ideal for construction, mining, and transportation industries, this engine provides impressive horsepower and towing capabilities for demanding work environments. Overall, the 6WG1 engine is a top choice for those needing a dependable and efficient engine for their heavy-duty applications. || Suitable for use with Isuzu Diesel Engine 6WG1 || Included in the package is one piece of the Fuel Injection Pump with the part number 094000-0565 and OEM part number 8-98013910-5.
KoovDem Part Number： 094000-0565 8-98013910-5 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Part Name: Fuel Injection Pump || The 6WG1 engine is a durable and powerful option for heavy-duty commercial vehicles and machinery, offering strong torque, efficient fuel consumption, and reliable operation in challenging conditions. Ideal for construction, mining, and transportation industries, this engine provides impressive horsepower and towing capabilities for demanding work environments. Overall, the 6WG1 engine is a top choice for those needing a dependable and efficient engine for their heavy-duty applications. || Suitable for use with Isuzu Diesel Engine 6WG1 || Included in the package is one piece of the Fuel Injection Pump with the part number 094000-0565 and OEM part number 8-98013910-5.
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09400-00565 | 8-98013910 | PUMP ASSY, SUPPLY |
Information:
1. Install the turbocharger on Tool (A).2. Put alignment marks on the two housings and cartridge assembly of the turbocharger for correct alignment during assembly.3. Loosen clamp (3), and remove compressor housing (4) from cartridge assembly (2).4. Loosen the remaining clamp, and remove cartridge assembly (2) from turbine housing (1).
Typical Example5. Put the cartridge group (shown in the illustration) with nut (16) up in Tool (B). Use a 5S9566 Sliding T-Wrench and a universal socket to remove nut (16) that holds the compressor wheel (15) to the wheel assembly (19).6. Remove compressor wheel (15) and housing assembly (6) from wheel assembly (19). Remove piston ring (13) from the wheel assembly.7. Use Tool (C), and remove snap ring (5) from housing assembly (6). Remove insert (14) and sleeve (18) from the housing assembly. Remove seal (22) from insert (14). Remove ring (20) from sleeve (18).8. Remove oil deflector (23), thrust ring (21), bearing assembly (7), spacer sleeve (24) and thrust ring (8) from housing assembly (6).9. Use Tool (D), and remove snap ring (9) from the housing assembly. Remove bearing (25). Remove snap ring (10) with Tool (D).10. Use Tool (D), and remove snap ring (12) from the housing assembly. Remove bearing (26). Remove snap ring (11) with Tool (D).11. Check all the parts of the turbocharger for damage. If any parts are damaged, use new parts for replacement. See Special Instruction Form No. SMHS6854 for turbocharger reconditioning. Also, see Guidelines For Reusable Parts, Form No. SEBF8018. The following steps are for assembly of the turbocharger.12. Make sure that all the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Do not put oil on any parts of the turbocharger until after the compressor wheel has been installed. After the turbocharger has been assembled, put clean engine oil into the oil inlet of the turbocharger.
Make sure the snap rings that hold bearings (25) and (26) in housing assembly (6) are installed with the round edge of the outside diameter toward the bearing.
13. Install snap ring (11) with Tool (D). Install bearing (26). Install snap ring (12) with Tool (D).14. Install snap ring (10) with Tool (D). Install bearing (25). Install snap ring (9) with Tool (D).15. Put wheel assembly (19) in position on Tool (B) with the threaded portion end up.
Typical Example5. Put the cartridge group (shown in the illustration) with nut (16) up in Tool (B). Use a 5S9566 Sliding T-Wrench and a universal socket to remove nut (16) that holds the compressor wheel (15) to the wheel assembly (19).6. Remove compressor wheel (15) and housing assembly (6) from wheel assembly (19). Remove piston ring (13) from the wheel assembly.7. Use Tool (C), and remove snap ring (5) from housing assembly (6). Remove insert (14) and sleeve (18) from the housing assembly. Remove seal (22) from insert (14). Remove ring (20) from sleeve (18).8. Remove oil deflector (23), thrust ring (21), bearing assembly (7), spacer sleeve (24) and thrust ring (8) from housing assembly (6).9. Use Tool (D), and remove snap ring (9) from the housing assembly. Remove bearing (25). Remove snap ring (10) with Tool (D).10. Use Tool (D), and remove snap ring (12) from the housing assembly. Remove bearing (26). Remove snap ring (11) with Tool (D).11. Check all the parts of the turbocharger for damage. If any parts are damaged, use new parts for replacement. See Special Instruction Form No. SMHS6854 for turbocharger reconditioning. Also, see Guidelines For Reusable Parts, Form No. SEBF8018. The following steps are for assembly of the turbocharger.12. Make sure that all the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Do not put oil on any parts of the turbocharger until after the compressor wheel has been installed. After the turbocharger has been assembled, put clean engine oil into the oil inlet of the turbocharger.
Make sure the snap rings that hold bearings (25) and (26) in housing assembly (6) are installed with the round edge of the outside diameter toward the bearing.
13. Install snap ring (11) with Tool (D). Install bearing (26). Install snap ring (12) with Tool (D).14. Install snap ring (10) with Tool (D). Install bearing (25). Install snap ring (9) with Tool (D).15. Put wheel assembly (19) in position on Tool (B) with the threaded portion end up.