Information pump assy, supply
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
HP0 Fuel Injection Pump Compatible with Isuzu 6HK1 Forward Engine Truck 8-94392714-5 8-94392714-6 094000-0097
KoovDem Part Number: 094000-0097, 8-94392714-6, 8-94392714-5. || Compatible Model: For Isuzu 6HK1 Forward Engine Truck. || Effective and Reliable: Utilizing cutting-edge technology, this system delivers effective and reliable fuel supply, guaranteeing smooth vehicle performance. || Rugged and Dependable: With a track record of being rigorously tested and proven, this product offers durability and reliability, ensuring it operates consistently even in the harshest of environments. || Straightforward Installation: With a user-friendly interface, installing this product is a breeze. Simply plug it in and you're good to go, no technical expertise needed.
KoovDem Part Number: 094000-0097, 8-94392714-6, 8-94392714-5. || Compatible Model: For Isuzu 6HK1 Forward Engine Truck. || Effective and Reliable: Utilizing cutting-edge technology, this system delivers effective and reliable fuel supply, guaranteeing smooth vehicle performance. || Rugged and Dependable: With a track record of being rigorously tested and proven, this product offers durability and reliability, ensuring it operates consistently even in the harshest of environments. || Straightforward Installation: With a user-friendly interface, installing this product is a breeze. Simply plug it in and you're good to go, no technical expertise needed.
094000-0097 8-94392714-6 Fuel Injection Pump Replacement for Isuzu Diesel Engine 6HK1
WZCPSM Product Name:Fuel Injection Pump || Product Number: 094000-0097 8-94392714-6 || Application:Replacement for Isuzu Diesel Engine 6HK1 || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
WZCPSM Product Name:Fuel Injection Pump || Product Number: 094000-0097 8-94392714-6 || Application:Replacement for Isuzu Diesel Engine 6HK1 || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
8-94392714-6 094000-0097 Fuel Injection Pump Compatible with Isuzu Diesel Engine 6HK1
TuneCrumph 🚗Product name:Fuel Injection Pump || 🚗Part Number:094000-0097 8-94392714-6 || 🚗APPlication:Compatible with Isuzu Diesel Engine 6HK1 || 🚗Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || 🚗NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
TuneCrumph 🚗Product name:Fuel Injection Pump || 🚗Part Number:094000-0097 8-94392714-6 || 🚗APPlication:Compatible with Isuzu Diesel Engine 6HK1 || 🚗Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || 🚗NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
You can express buy:
USD 850.25
19-05-2025
19-05-2025
HP0 High Pressure Fuel Pump For ISUZU 6HK1 Diesel Engine Oil Pump 094000-0097 8943927145 8-94392714-4 8-94392714-5 8-94392714-6
USD 799
13-05-2025
13-05-2025
HP0 Diesel Fuel Injection Pump For ISUZU 6HK1 High Pressure Oil Pump Assembly 094000-0098 094000-0097 8-94392714-5 8-94392714-6
USD 827.69
19-05-2025
19-05-2025
HP0 Fuel Injection Pump 094000-0097 8-94392714-6 8-94392714-5 for Isuzu 6HK1 Diesel Engine Truck
Cross reference number
| Part num | Firm num | Firm | Name |
| 8-94392714-6 | ISUZU | PUMP ASSY, SUPPLY | |
| 8-94392714-5 | ISUZU | PUMP ASSY SUPPLY | |
| 8-94392714-4 | ISUZU | PUMP ASSY SUPPLY | |
| 8-94392714-3 | ISUZU | PUMP ASSY SUPPLY | |
| 8-94392714-2 | ISUZU | PUMP ASSY SUPPLY |
Information:
You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.This maintenance is to be performed at the interval specified in the Maintenance Schedule for the engine being maintained.Before proceeding with this maintenance, first perform Daily maintenance requirements.Zinc Rods
Zinc rods are inserted in the engine's raw water cooling system to help prevent the corrosive action of salt (sea) water. The reaction of the zinc to the sea (raw) water causes the rods to deteriorate, instead of more critical engine cooling system parts.Therefore, the zinc rods must be inspected every 50 service hours, and replaced when they have deteriorated.Depending on the engine and attachments, their location may be in the oil cooler heat exchanger bonnet, raw water heat exchanger bonnet, aftercooler lines, raw water pump and/or in the raw water lines.Inspect
Removing Old Zinc Rods
1. Remove and observe condition of all zinc rods. They are painted red for easy identification. 2. Tap the zinc rods lightly with a hammer. If a rod has deteriorated, or flakes apart when tapped, install a new zinc rod.Installing New Zinc Rods
1. Unscrew or drill the existing rod from the plug base.2. Apply 9S3263 Thread Lock to the internal threads of the plug(s) holding the zinc rod(s). Install new rod(s) in the plug base(s).3. Coat the external pipe threads with 5P3413 Pipe Sealant and install the plug(s) into their proper locations in the raw water system.Marine Gear
Drain Oil and Replace Filter
With the oil warm and the engine stopped, drain the oil and replace oil filter element on a new or rebuilt marine gear at the first 50 Hour interval to ensure draining of possible large debris and particles from the oil and gear housing.Drain and change filter element with the oil warm and the engine stopped to allow for the draining of waste particles that are suspended in the oil. Suspended waste particles will settle on the bottom and will not be removed with the draining oil if the oil is cold.Failure to follow this recommended procedure would result in these waste particles being recirculated through your marine gear system with the new oil. Refer to the topic in the Every 1000 Hour maintenance interval in this manual for instructions and procedure.For lubrication and maintenance requirements for your marine gear model, refer to the OEM and/or vessel manufacturer's recommendations.Marine Gear Operation, Maintenance, Warranty & Parts Support
Caterpillar encourages customers to refer to their Caterpillar dealer and/or marine gear OEM dealer for information regarding operation and maintenance for the transmission.All warranty and parts support for the marine gear (including installation and service problem resolution) will be the responsibility of the selling dealer and the marine gear OEM.Air Tank
Drain Water and Sediment
When required, or at least on a weekly basis, open the drain valve on the air tank and drain the water and sediment. Close the valve.
Zinc rods are inserted in the engine's raw water cooling system to help prevent the corrosive action of salt (sea) water. The reaction of the zinc to the sea (raw) water causes the rods to deteriorate, instead of more critical engine cooling system parts.Therefore, the zinc rods must be inspected every 50 service hours, and replaced when they have deteriorated.Depending on the engine and attachments, their location may be in the oil cooler heat exchanger bonnet, raw water heat exchanger bonnet, aftercooler lines, raw water pump and/or in the raw water lines.Inspect
Removing Old Zinc Rods
1. Remove and observe condition of all zinc rods. They are painted red for easy identification. 2. Tap the zinc rods lightly with a hammer. If a rod has deteriorated, or flakes apart when tapped, install a new zinc rod.Installing New Zinc Rods
1. Unscrew or drill the existing rod from the plug base.2. Apply 9S3263 Thread Lock to the internal threads of the plug(s) holding the zinc rod(s). Install new rod(s) in the plug base(s).3. Coat the external pipe threads with 5P3413 Pipe Sealant and install the plug(s) into their proper locations in the raw water system.Marine Gear
Drain Oil and Replace Filter
With the oil warm and the engine stopped, drain the oil and replace oil filter element on a new or rebuilt marine gear at the first 50 Hour interval to ensure draining of possible large debris and particles from the oil and gear housing.Drain and change filter element with the oil warm and the engine stopped to allow for the draining of waste particles that are suspended in the oil. Suspended waste particles will settle on the bottom and will not be removed with the draining oil if the oil is cold.Failure to follow this recommended procedure would result in these waste particles being recirculated through your marine gear system with the new oil. Refer to the topic in the Every 1000 Hour maintenance interval in this manual for instructions and procedure.For lubrication and maintenance requirements for your marine gear model, refer to the OEM and/or vessel manufacturer's recommendations.Marine Gear Operation, Maintenance, Warranty & Parts Support
Caterpillar encourages customers to refer to their Caterpillar dealer and/or marine gear OEM dealer for information regarding operation and maintenance for the transmission.All warranty and parts support for the marine gear (including installation and service problem resolution) will be the responsibility of the selling dealer and the marine gear OEM.Air Tank
Drain Water and Sediment
When required, or at least on a weekly basis, open the drain valve on the air tank and drain the water and sediment. Close the valve.