Information holder & nozzle se
Rating:
Components :
| 001. | HOLDER & NOZZLE SE | 09350-04520 |
Scheme ###:
| 000. | [01] | 09350-04520 | HOLDER & NOZZLE SE | ME076515 |
| 001. | [01] | 09310-04520 | HOLDER ASSY, NOZZL | ME728143 |
| 001-001. | [01] | 09311-04520 | BODY SUB-ASSY, NOZ | ME728180 |
| 001-002. | [01] | 09312-10330 | PIN, NOZZLE HOLDER | ME703615 |
| 001-003. | [01] | 09312-70270 | SPRING, NOZZLE HOL | ME703616 |
| 001-004. | [01] | 09313-10200 | SCREW, ADJUST | ME703617 |
| 001-005. | [01] | 09313-40290 | NUT, CAP | ME703618 |
| 001-006. | [01] | 09315-10380 | CONNECTOR, NOZZLE | ME703265 |
| 001-007. | [01] | 09315-80010 | GASKET, INLET CONN | MM500889 |
| 001-008. | [01] | 09316-40781 | NUT, NOZZLE RETAIN | ME703619 |
| 001-009. | [01] | 09316-60091 | SCREW, HOLLOW | ME703657 |
| 001-010. | [01] | 09324-50052 | WASHER | MM501731 |
| 001-011. | [02] | 94901-81020 | WASHER, COPPER PLA | ME022309 |
| 002. | [01] | 09340-02360 | NOZZLE ASSY | ME728144 |
Include in #3:
09350-04520
as HOLDER & NOZZLE SE
Include as Nozzle:
0920003790
as Nozzle
Cross reference number
| Part num | Firm num | Firm | Name |
| 09350-04520 | ME076515 | HOLDER & NOZZLE SE | |
| ME076515 | MITSUBISHI | HOLDER & NOZZLE SE |
Information:
Introduction
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.