Fuel injectors
  1. Home
  2. denso
  3. #09350-02000

09350-02000 HOLDER & NOZZLE SE Denso Cross


 

Information holder & nozzle se

09350-02000 HOLDER & NOZZLE SE
Rating:
35
Buy HOLDER & NOZZLE SE 09350-02000 genuine, new aftermarket engine parts with delivery

Components :

001. HOLDER & NOZZLE SE 09350-02000

Scheme ###:

HOLDER & NOZZLE SE
000. [01] 09350-02000 HOLDER & NOZZLE SE 716-12850-00
001. [01] 09310-02000 HOLDER ASSY, NOZZL
001-001. [01] 09311-12000 BODY
001-002. [01] 09312-10030 PIN, NOZZLE HOLDER 716-12853-00
001-003. [01] 09312-70020 SPRING, NOZZLE HOL 716-12854-00
001-004. [01] 09316-40800 NUT, NOZZLE RETAIN
001-006. [01] 09317-40011 DISTANCE PIECE 716-12855-00
001-007. [1C] 09317-51210 WASHER 722-12859-30
001-007. [1C] 09317-51220 WASHER 722-12859-40
001-007. [1C] 09317-51230 WASHER 722-12859-50
001-007. [1C] 09317-51240 WASHER 722-12859-60
001-007. [1C] 09317-51250 WASHER 722-12859-70
001-007. [1C] 09317-51260 WASHER 722-12859-80
001-007. [1C] 09317-51200 WASHER 722-12859-20
001-007. [1C] 09317-51190 WASHER 722-12859-10
001-007. [1C] 09317-50640 WASHER 716-12859-40
001-007. [1C] 09317-50210 WASHER 716-12859-50
001-007. [1C] 09317-50220 WASHER 716-12859-60
001-007. [1C] 09317-50230 WASHER 716-12859-70
001-007. [1C] 09317-50610 WASHER 716-12859-10
001-007. [1C] 09317-50620 WASHER 716-12859-20
001-007. [1C] 09317-50630 WASHER 716-12859-30
001-008. [01] 09326-60080 FLANGE
001-011. [01] 94918-00152 SCREW, HOLLOW 716-12856-00
001-013. [02] 94901-81020 WASHER, COPPER PLA 716-12845-00
002. [01] 09340-00250 NOZZLE ASSY 716-12862-00

Include in #3:

09350-02000 as HOLDER & NOZZLE SE

Include as Nozzle:

0945001790 as Nozzle
0945001800
0945001810
0945002460
0945002470
0945002480

Cross reference number



Part num Firm num Firm Name
09350-02000  716-12850-  HOLDER & NOZZLE SE
716-12850-00    YAMAHA HOLDER & NOZZLE SE




Information:

1. Disconnect fuel line (1) from the fuel transfer pump. Disconnect fuel line (2) from the fuel injection pump housing. Remove line (3) from the fuel ratio control and aftercooler housing. 2. Disconnect fuel injection lines (4) from the fuel injection pump housing.
Do not disconnect the air line from the air compressor governor until the air pressure is zero.
3. Loosen the bleed valves, and release the air pressure in the air tank. 4. Remove air line (5). Remove coolant line (6). 5. The weight of the fuel injection pump housing and governor is 57 kg (125 lb). Attach a hoist to the fuel injection pump housing, and remove bolts (7). 6. Remove the two nuts and two bolts (8) and bolt (9). Remove fuel injection pump housing and governor (10). 7. Remove O-ring seals (11) from the fuel injection pump housing.Install Fuel Injection Pump Housing And Governor
1. Attach a hoist to the fuel injection pump housing and governor (1). Be sure that the three O-ring seals are in position in the fuel injection pump housing. Install the fuel injection pump housing and governor on the timing gear housing. 2. Connect air line (2) and water line (3) to the air compressor. 3. Connect fuel injection lines (4) to fuel injection pump housing, and tighten the fuel injection line nuts to a torque of 40 7 N m (30 5 lb ft) with tool (C). 4. Connect fuel line (5) to fuel injection pump housing, and connect fuel line (6) to the fuel transfer pump. Install line (7) between the fuel ratio control and aftercooler housing. For timing of the fuel injection pump, see Install Automatic Timing Advance.End By:a. install automatic timing advance

Have questions with 09350-02000?





09350-01992 HOLDER & NOZZLE SE 09350-01980 09350-01970 09350-01960 09350-01950
01900371 HOLDER & NOZZLE SE 01900590KZ HOLDER ASSY, NOZZL 01900610KZ HOLDER & NOZZLE SE 04009-03160 04230-30120

Group cross 09350-02000

Back to top