Information holder & nozzle se
Rating:
Components :
| 001. | HOLDER & NOZZLE SE | 09350-01501 |
Scheme ###:
| 000. | [01] | 09350-01501 | HOLDER & NOZZLE SE | MM105102 |
| 001. | [01] | 09310-01501 | HOLDER ASSY, NOZZL | MM500825 |
| 001-001. | [01] | 09311-11501 | BODY | MM500216 |
| 001-002. | [01] | 09312-10030 | PIN, NOZZLE HOLDER | MM500135 |
| 001-003. | [01] | 09312-70020 | SPRING, NOZZLE HOL | ME022313 |
| 001-004. | [01] | 09316-40651 | NUT, NOZZLE RETAIN | MM500217 |
| 001-005. | [1C] | 09317-50300 | WASHER | MM500794 |
| 001-005. | [1C] | 09317-50610 | WASHER | MM500795 |
| 001-005. | [1C] | 09317-50620 | WASHER | MM500796 |
| 001-005. | [1C] | 09317-50630 | WASHER | MM500797 |
| 001-005. | [1C] | 09317-50640 | WASHER | MM500798 |
| 001-005. | [1C] | 09317-50650 | WASHER | MM500799 |
| 001-005. | [1C] | 09317-50290 | WASHER | MM500793 |
| 001-005. | [1C] | 09317-50280 | WASHER | MM500792 |
| 001-005. | [1C] | 09317-50270 | WASHER | MM500791 |
| 001-005. | [1C] | 09317-50210 | WASHER | MM500785 |
| 001-005. | [1C] | 09317-50220 | WASHER | MM500786 |
| 001-005. | [1C] | 09317-50230 | WASHER | MM500787 |
| 001-005. | [1C] | 09317-50240 | WASHER | P820-8634 |
| 001-005. | [1C] | 09317-50250 | WASHER | P820-8635 |
| 001-005. | [1C] | 09317-50260 | WASHER | MM500790 |
| 001-006. | [01] | 09326-60030 | FLANGE | MM500218 |
| 001-007. | [01] | 09314-00071 | NIPPLE SUB-ASSY, O | MM500279 |
| 001-008. | [01] | 94901-80350 | WASHER, COPPER PLA | ME702922 |
| 002. | [01] | 09340-00060 | NOZZLE ASSY | P811-8212 |
Include in #3:
09350-01501
as HOLDER & NOZZLE SE
Cross reference number
| Part num | Firm num | Firm | Name |
| 09350-01501 | MM105102 | HOLDER & NOZZLE SE |
Information:
(8) Piston cooling orifice.
There are holes in the bores for the main bearings, between the cylinders for piston cooling orifices. These holes must have orifices (8) installed.
(9) Distance two dowels extend from the surface of the cylinder block ... 19.8 0.5 mm (.78 .02 in)(10) Distance hollow dowel extends from the surface of the cylinder block ... 16.0 0.5 mm (.63 .02 in)(11) Depth to install two dowels below the surface of the cylinder block (apply 7M7456 Bearing Mount) ... 1.0 0.5 mm (.04 .02 in)(12) Distance dowels extend from the front face of the cylinder block ... 22.4 0.5 mm (.88 .02 in)(13) Distance stud extends from the front face of the cylinder block ... 15.7 0.5 mm (.62 .02 in)(14) Distance two dowels extend from the rear face of the cylinder block ... 12.7 0.5 mm (.50 .02 in)
There are holes in the bores for the main bearings, between the cylinders for piston cooling orifices. These holes must have orifices (8) installed.
(9) Distance two dowels extend from the surface of the cylinder block ... 19.8 0.5 mm (.78 .02 in)(10) Distance hollow dowel extends from the surface of the cylinder block ... 16.0 0.5 mm (.63 .02 in)(11) Depth to install two dowels below the surface of the cylinder block (apply 7M7456 Bearing Mount) ... 1.0 0.5 mm (.04 .02 in)(12) Distance dowels extend from the front face of the cylinder block ... 22.4 0.5 mm (.88 .02 in)(13) Distance stud extends from the front face of the cylinder block ... 15.7 0.5 mm (.62 .02 in)(14) Distance two dowels extend from the rear face of the cylinder block ... 12.7 0.5 mm (.50 .02 in)