Information nozzle assy
Nozzle Type:
ND-DLLA160P25
MITSUBISHI CANTER 4D32
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
BYJXCD 4 Pieces/lot Injection Nozzle 093400-5250 / DLLA160P25 for Engine 4D32
BYJXCD Efficient combustion: the injector nozzle adopts precise design, which makes the fuel atomization more uniform, improves the combustion efficiency and reduces the fuel consumption. || Reduced emissions: the injector nozzle optimizes the spraying angle to reduce exhaust emissions and protect the environment. || Easy to install: the injector nozzle design is humanized, easy to install, saving maintenance time. || Strong compatibility: fuel injector nozzle is suitable for a variety of models, wide compatibility. || Fuel saving: fuel injectors precisely control fuel injection, effectively reduce fuel consumption.
BYJXCD Efficient combustion: the injector nozzle adopts precise design, which makes the fuel atomization more uniform, improves the combustion efficiency and reduces the fuel consumption. || Reduced emissions: the injector nozzle optimizes the spraying angle to reduce exhaust emissions and protect the environment. || Easy to install: the injector nozzle design is humanized, easy to install, saving maintenance time. || Strong compatibility: fuel injector nozzle is suitable for a variety of models, wide compatibility. || Fuel saving: fuel injectors precisely control fuel injection, effectively reduce fuel consumption.
$64.24
08 Feb 2023
CN: runhuayour
4 Pcs Fuel Injector Nozzle DLLA160P25 0934005250 for Mitsubishi Engine 4D31 4D32
Ternksfittins Part Number:DLLA160P25 0934005250 || ???????Application:For Mitsubishi Engine 4D31 4D32
Ternksfittins Part Number:DLLA160P25 0934005250 || ???????Application:For Mitsubishi Engine 4D31 4D32
$67.99
15 Mar 2023
0.88[0.40] Pounds
CN: lutong part plant
Fuel Injector Nozzle Tips 093400-5250 DLLA160P25 Fits for Mitsubishi 4D32 Engine 4pcs/lot
DICSCL PARCS Fuel Injector Nozzle Tips 093400-5250 DLLA160P25 fits for Mitsubishi 4D32 Engine 4pcs/lot || Material: Made of high quality for longer durability and strength.100% quality inspection to ensure the high quality. Upgraded packaging to avoid damage. || Easy Installation:No further modification to direct replacement. || OEM Part Number:DLLA160P25 || Estimated Time of Delivery from China: 5-10 working days.Customer satisfaction is always our top priority, we are standing by ready to provide you with reliable assistance with any questions you may have
DICSCL PARCS Fuel Injector Nozzle Tips 093400-5250 DLLA160P25 fits for Mitsubishi 4D32 Engine 4pcs/lot || Material: Made of high quality for longer durability and strength.100% quality inspection to ensure the high quality. Upgraded packaging to avoid damage. || Easy Installation:No further modification to direct replacement. || OEM Part Number:DLLA160P25 || Estimated Time of Delivery from China: 5-10 working days.Customer satisfaction is always our top priority, we are standing by ready to provide you with reliable assistance with any questions you may have
You can express buy:
USD 6
10-11-2022
10-11-2022
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09340-05250 | ME016301 | NOZZLE ASSY | |
| ME016301 | MITSUBISHI | NOZZLE ASSY |
Information:
Start By:a remove rack actuator packageb. remove fuel injection pumps 1. Remove rack (1) from the fuel pump housing. 2. Remove six lifters (2) from the fuel pump housing. Put identification marks on the lifters for installation purposes. 3. Remove camshaft (3) from the fuel pump housing. It may be necessary to use a soft hammer to push the camshaft out of the governor end of the fuel pump housing. 4. Remove races (4) and bearing (5) from the camshaft. Remove ring (6) if necessary. 5. Remove rack bearing (7) from both ends of the housing and dowel (8) if necessary. 6. Use tooling (A), and remove three camshaft bearings (9). 7. Remove the bolts, cover (10) and the gasket. 8. Remove pins (12), the seal and dowels (11) if necessary. Pins (12) must be pushed from the inside out.Assemble Fuel Injection Pump Housing
1. Clean and inspect all parts. Make a replacement of all parts that are worn or damaged. 2. Lubricate the seal with clean engine oil, and install pin (12). Pin (12) must protrude into the pump bore 2.15 .05 mm (0.85 .002 in.).3. Install dowel (11) so that it protrudes into the pump bore 1.93 .05 mm (0.76 .002 in.). 4. Install the gasket, cover (10) and the bolts. 5. Install the rack bearing with tooling (B). Install the bearing until the driver comes in contact with the plate. The bearing should be installed to a depth of 83.0 0.5 mm (3.27 .02 in.) from the fuel pump mounting face. 6. Measure the rack bearing (7). Dimension (X) must be 11.178 0.05 mm (.4400 .002 in.). Dimension (W) must be 12.767 0.058 mm (.5026 .0022 in.). 7. Install dowel (8). Dowel (8) must protrude 6.0 0.5 mm (.24 .02 in.) from the fuel pump housing face.8. Install the rear rack bearing with tooling (C) to a depth of 7.16 0.13 mm (.282 .005 in.) below the fuel pump housing surface. The inside diameter of the rear rack bearing must be 12.746 0.045 mm (.5018 .0017 in.). 9. User tooling (D), and install three camshaft bearings (9). Oil holes (13) in the camshaft bearings must be positioned 30° 3° above the horizontal centerline toward the engine side of the fuel pump housing. The outer bearings must be installed 1.0 0.5 mm (0.04 0.02 in.) below the surface marked (Z). The inner bearing must be installed 218.0 0.3 mm (8.58 .012 in.) below the front surface (Y). Diameter (XX) must be 68.339 0.038 mm (2.6905 0.015 in.) after assembly. 10. Install ring (6) races (4) and bearing (5) on the camshaft. 11. Lubricate can bearings (9) and cam shaft bearing journals with clean engine oil.12. Install camshaft (3) into the fuel pump housing.
The notch on the lifter must be in line with the dowel in the lifter bore. The lifter must slide up and
1. Clean and inspect all parts. Make a replacement of all parts that are worn or damaged. 2. Lubricate the seal with clean engine oil, and install pin (12). Pin (12) must protrude into the pump bore 2.15 .05 mm (0.85 .002 in.).3. Install dowel (11) so that it protrudes into the pump bore 1.93 .05 mm (0.76 .002 in.). 4. Install the gasket, cover (10) and the bolts. 5. Install the rack bearing with tooling (B). Install the bearing until the driver comes in contact with the plate. The bearing should be installed to a depth of 83.0 0.5 mm (3.27 .02 in.) from the fuel pump mounting face. 6. Measure the rack bearing (7). Dimension (X) must be 11.178 0.05 mm (.4400 .002 in.). Dimension (W) must be 12.767 0.058 mm (.5026 .0022 in.). 7. Install dowel (8). Dowel (8) must protrude 6.0 0.5 mm (.24 .02 in.) from the fuel pump housing face.8. Install the rear rack bearing with tooling (C) to a depth of 7.16 0.13 mm (.282 .005 in.) below the fuel pump housing surface. The inside diameter of the rear rack bearing must be 12.746 0.045 mm (.5018 .0017 in.). 9. User tooling (D), and install three camshaft bearings (9). Oil holes (13) in the camshaft bearings must be positioned 30° 3° above the horizontal centerline toward the engine side of the fuel pump housing. The outer bearings must be installed 1.0 0.5 mm (0.04 0.02 in.) below the surface marked (Z). The inner bearing must be installed 218.0 0.3 mm (8.58 .012 in.) below the front surface (Y). Diameter (XX) must be 68.339 0.038 mm (2.6905 0.015 in.) after assembly. 10. Install ring (6) races (4) and bearing (5) on the camshaft. 11. Lubricate can bearings (9) and cam shaft bearing journals with clean engine oil.12. Install camshaft (3) into the fuel pump housing.
The notch on the lifter must be in line with the dowel in the lifter bore. The lifter must slide up and