Fuel injectors
  1. Home
  2. denso
  3. #09300-06920

09300-06920 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935007840
09300-06920 PUMP ASSY, INJECTI
Rating:
12
Buy PUMP ASSY, INJECTI 09300-06920 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09300-06920
002. GOVERNOR ASSY, MEC 09130-07730
003. BODY ASSY, INJECTI 19010-02030

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09300-06920 PUMP ASSY, INJECTI 22010-E0532-A
003. [01] 19010-02030 BODY ASSY, INJECTI
004. [01] 09130-07730 GOVERNOR ASSY, MEC
005. [01] 09180-04450 TIMER ASSY, AUTOMA
006. [01] 09210-03460 PUMP ASSY, FUEL FE
007. [01] 09006-00660 COVER SUB-ASSY, TI
008. [01] 94914-03690 O-RING 22817-2350A
009. [01] 90458-05750 KEY, WOODRUFF S2289-11070-A
010. [01] 09001-20360 NUT, TIMER ROUND
011. [01] 94901-81550 WASHER, COPPER PLA SL722-02215
012. [01] 09001-80620 COVER, CONTROL RAC S2211-41420-A
013. [02] 09028-50030 CAP S2232-31210-A
015. [04] 90258-10001 WASHER, SPRING S2821-91120-A
018. [04] 94905-02680 NUT, HEXAGON S2282-52070-A
019. [04] 94901-15020 WASHER, STEEL PLAT S2287-71551-A
020. [02] 94904-76880 BOLT, W/WASHER S2281-53320-A
022. [01] 94904-76910 BOLT, W/WASHER S2281-53240-A
023. [01] 94904-76900 BOLT, W/WASHER S2281-53230-A
024. [04] 94904-76890 BOLT, W/WASHER S2281-53210-A
025. [03] 94901-02490 WASHER S2287-71100-A
026. [01] 09031-00460 VALVE ASSY, OVERFL 22107-1750A
027. [02] 09028-50030 CAP S2232-31210-A
028. [01] 09028-50050 CAP S2232-31430-A

Include in #3:

09300-06920 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09300-06920  22010-E053  PUMP ASSY, INJECTI
22010-E0532-A    HINO PUMP ASSY, INJECTI




Information:

1. Remove bolts (1) and the locks that hold oil pump (2) in position.2. Remove oil pump (2).Install Oil Pump
1. Put oil pump (1) in position on the engine. Install the bolts and locks that hold it to the engine.end by: a) install oil panDisassemble Oil Pump
start by: a) remove oil pump
TYPICAL EXAMPLE1. Remove pressure relief valve exhaust tube (6).2. Remove suction tube and screen assembly (3).3. Remove the pressure relief valve housing (5). Remove plunger (1), spring (4) and spacer (2) from valve housing (5). 4. Remove the cotter pin from the gear retaining nut. Loosen the nut that holds the gear until it is even with the end of the shaft. Install tooling (A) and make a separation of gear (7) from the shaft.5. Remove tooling (A), retaining nut, gear and woodruff key. 6. Remove the bolts that hold the pump housing. Remove pump housing (8), gear (10) and shaft assembly (9). 7. Use tooling (B) to remove the bearing from the pump housing and gear.Assemble Engine Oil Pump
1. Use tooling (A) to install the bearings in the pump housings and gear.2. Put clean SAE 30 engine oil on the shafts and gear.3. Install the gear and shaft assembly in the pump housing, and connect the pump housings. After bolts that hold the pump housing have been tightened the pump gears must turn freely. 4. Install the woodruff key, drive gear and retaining nut (1). Tighten the nut that holds the gear to 100 lb.ft. (135.6 N m) plus enough to make alignment of cotter pin hole. Install cotter pin.
TYPICAL EXAMPLE5. Put lubrication on and install the spacer, spring and plunger in the pressure relief valve housing. Install the housing assembly (3).6. Install the pressure relief valve exhaust tube (4).7. Install the suction tube and screen assembly (2).end by: a) install oil pump

Have questions with 09300-06920?





09300-06910 PUMP ASSY, INJECTI 09300-06900 09300-06890 09300-06880 09300-06870
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09300-06920

Back to top