09300-06841 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

09300-06841 PUMP ASSY, INJECTI
Rating:
37
Buy PUMP ASSY, INJECTI 09300-06841 genuine, new aftermarket engine parts with delivery

Scheme ###:

000. [01] 09300-06841 PUMP ASSY, INJECTI 22010-E0061
003. [01] 19010-01990 BODY ASSY, INJECTI S2211-03860-A
004. [01] 09130-07580 GOVERNOR ASSY, MEC S2231-07240-A
005. [01] 09180-04440 TIMER ASSY, AUTOMA S2251-03240-A
006. [01] 09210-03450 PUMP ASSY, FUEL FE S2257-01940-A
007. [01] 09006-00650 COVER SUB-ASSY, TI 22650-E0030
008. [01] 94914-03690 O-RING 22817-2350A
009. [01] 90458-05750 KEY, WOODRUFF S2289-11070-A
010. [01] 09001-20340 NUT, TIMER ROUND S2282-52240-A
011. [01] 94901-81550 WASHER, COPPER PLA SL722-02215
012. [01] 09001-80620 COVER, CONTROL RAC S2211-41420-A
013. [01] 09028-50030 CAP S2232-31210-A
015. [04] 90258-10001 WASHER, SPRING S2821-91120-A
018. [04] 94905-02680 NUT, HEXAGON S2282-52070-A
019. [04] 94901-15020 WASHER, STEEL PLAT S2287-71551-A
020. [02] 94904-76880 BOLT, W/WASHER S2281-53320-A
022. [01] 94904-76910 BOLT, W/WASHER S2281-53240-A
023. [01] 94904-76900 BOLT, W/WASHER S2281-53230-A
024. [04] 94904-76890 BOLT, W/WASHER S2281-53210-A
025. [03] 94901-02490 WASHER S2287-71100-A
026. [01] 09031-00350 VALVE ASSY, OVERFL S2210-71470-A
026. [01] 09031-00460 VALVE ASSY, OVERFL 22107-1750A
027. [01] 09028-50030 CAP S2232-31210-A
028. [01] 09028-50050 CAP S2232-31430-A

Include in #3:

09300-06841 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09300-06841  22010-E006  PUMP ASSY, INJECTI




Information:


Tightening Procedure For Main Bearings(8) Torque for the bolts that hold the caps for the main bearings: Install the main bearing caps with the marks (arrow) toward the front of the engine. Install each cap in the correct position by putting the number stamped on the bottom of the cap toward the corresponding number on the cylinder block.a. Put engine oil on the threads of the bolts.b. Tighten the bolts first on the tab side of the cap to ... 190 10 lb. ft.(260 14 N m)c. Tighten the bolts on the opposite side to ... 190 10 lb. ft.(260 14 N m)d. Put a mark on each bolt and cap as shown.e. Tighten the bolts on the opposite side, from the mark ... 120°f. Tighten the bolts on the tab side of the cap, from the mark ... 120°(9) Dimension (new) from centerline of crankshaft bearing bore to bottom of block (pan rails) ... 6.500 .004 in.(165.10 0.10 mm) (10) Put 9S3264 Pipe Sealant on threads of 14 plugs before installation in the cylinder block.(11) Torque for bolts holding oil jet cooling tubes (later engines) ... 18 5 lb. ft.(24 7 N m)

Have questions with 09300-06841?





Group cross 09300-06841

Back to top