09300-03192 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

09300-03192 PUMP ASSY, INJECTI
Rating:
32
Buy PUMP ASSY, INJECTI 09300-03192 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09300-03192
001. PUMP ASSY, INJECTI 09300-03192
002. BODY ASSY, INJECTI 09010-08630
003. GOVERNOR ASSY, MEC 09130-03062
004. COVER ASSY, GOVERN 09145-00232
005. COVER ASSY, GOVERN 09145-00362
006. TIMER ASSY, AUTOMA 09180-02781
007. PUMP ASSY, FUEL FE 09210-01510

Scheme ###:

000. [01] 09300-03192 PUMP ASSY, INJECTI 22010-5943
000. [01] 09300-03192 PUMP ASSY, INJECTI S2201-05943
004. [01] 09031-00130 VALVE ASSY, OVERFL S2210-71090-A
005. [02] 94901-02480 WASHER S2284-71940-A
006. [01] 09001-80090 COVER, CONTROL RAC S2211-41250-A
007. [04] 94904-72690 BOLT, W/WASHER S2281-52410-A
008. [01] 94904-74850 BOLT, W/WASHER S2281-52900-A
009. [01] 09006-00350 COVER SUB-ASSY, TI 22501-1020B
010. [01] 91418-06201 BOLT, W/WASHER S2281-51290-A
011. [01] 94904-73910 BOLT, W/WASHER S2281-52820-A
012. [01] 09210-01510 PUMP ASSY, FUEL FE S2257-01240-A
013. [01] 09130-03062 GOVERNOR ASSY, MEC S2231-04141-B
014. [01] 09001-20220 NUT, TIMER ROUND S2251-11060-A
015. [01] 09180-02781 TIMER ASSY, AUTOMA 22510-2161
016. [01] 09028-50050 CAP S2232-31430-A
017. [01] 90458-04051 KEY, WOODRUFF S2289-51080-A
017. [01] 09002-10030 KEY, WOODRUFF
018. [01] 09010-08630 BODY ASSY, INJECTI S2211-02550-A
021. [01] 09028-50030 CAP S2232-31210-A
022. [04] 91266-10081 NUT, HEXAGON S2282-51490-A
023. [04] 94901-15020 WASHER, STEEL PLAT S2287-71551-A
024. [04] 90258-10001 WASHER, SPRING S2821-91120-A
025. [01] 94901-40210 WASHER, COUNTERSUN S2286-71320-A

Include in #3:

09300-03192 as PUMP ASSY, INJECTI
09300-03192

Cross reference number



Part num Firm num Firm Name
09300-03192  22010-5943  PUMP ASSY, INJECTI




Information:

Engine Runs Rough
Misfiring Cylinders...See the topic MISFIRING AND RUNNING ROUGH.Fuel Injection Timing Not Correct. *Automatic Timing Advance Does Not Operate Correctly...Engine must have smooth acceleration. A timing advance that does not operate correctly can cause delays of the engine acceleration at some rpm before high idle, or possibly cause the engine to run rough and backfire during acceleration. This condition is difficult to find if engine acceleration is slow or at a constant engine rpm.Air in Fuel System...Prime the fuel system. See PRIMING THE FUEL SYSTEM.White Smoke
Cold Outside Temperatures...When the air outside is cold, the cylinder temperature is cooler. Not all the fuel will burn in the cylinders. The fuel which does not burn comes out the exhaust as white smoke. White smoke is normal in cold temperatures until the engine operates long enough to become warm. There will be less white smoke if No. 1D diesel fuel is used.Long Idle Periods...When an engine runs at idle speed for a long period of time, the cylinders cool and all of the fuel does not burn. Do not idle an engine for a long period of time. Stop engine when not in use. If long idle periods are necessary use No. 1D diesel fuel.Low Quality Fuel...Test the engine with fuel according to recommendations. See FUEL SPECIFICATIONS.Air in Fuel System ... See PRIMING THE SYSTEM.Fuel Injection Timing Not Correct. *Automatic Timing Advance Does Not Operate Correctly. *Valve Adjustment Not Correct ... Check and make necessary adjustments. See VALVE LASH ADJUSTMENT.Defective Fuel Nozzle(s) ... Defective fuel nozzles will normally cause the engine to "misfire" and run rough, and cause smoke. Replace the fuel nozzles. Fuel nozzles can be tested by your authorized dealer.Misfiring Cylinder(s) ... See the topic MISFIRING AND RUNNING ROUGH.Blue Smoke
Engine Oil Level Too High ... Do not overfill the crankcase. If the oil level in the crankcase goes up as the engine is used, check for fuel in the crankcase. See the topic FUEL IN CRANKCASE OIL.Damage to Positive Crankcase Ventilator Valve or Valve Assembled Wrong. *Worn Valve Guides. *Worn Piston Rings and/or Cylinder Walls ... Worn piston rings and/or cylinder walls can be the cause of blue smoke and can cause a loss of compression. Check cylinder condition with the cylinder leakage tester. *Wear or Damage to Pistons. **Authorized dealers are equipped with the necessary tools and personnel familiar with disassembly and assembly procedures to perform these services.

Have questions with 09300-03192?





Group cross 09300-03192

Back to top