Fuel injectors
  1. Home
  2. denso
  3. #09300-00640

09300-00640 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935002470
09300-00640 PUMP ASSY, INJECTI
Rating:
61
Buy PUMP ASSY, INJECTI 09300-00640 genuine, new aftermarket engine parts with delivery

KIT List:

Body assy, injecti 1904400300
Governor assy, mec 1908900250
Timer assy, automa 0918030050
Pump assy, fuel fe 1922900060
Pump assy, fuel fe 1922900060

Components :

001. PUMP ASSY, INJECTI 09300-00640
002. SWITCH KIT, CONTRO 09009-90241
003. BODY ASSY, INJECTI 09010-03691
004. GOVERNOR ASSY, MEC 09080-07761
005. TIMER ASSY, AUTOMA 09180-01710
006. PUMP ASSY, FUEL FE 09210-01140
007. PUMP ASSY, FUEL FE 09210-01551

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09300-00640 PUMP ASSY, INJECTI ME016182
003. [01] 09010-03691 BODY ASSY, INJECTI ME016010
004. [01] 09080-07761 GOVERNOR ASSY, MEC ME703262
005. [01] 09210-01140 PUMP ASSY, FUEL FE ME016021
005. [01] 09210-01551 PUMP ASSY, FUEL FE ME703037
006. [01] 09001-80190 COVER, CONTROL RAC ME022416
007. [01] 94913-00190 KEY, WOODRUFF ME703361
008. [01] 94901-50500 WASHER, SPRING ME008373
009. [01] 09001-20080 NUT, TIMER ROUND ME022426
009. [01] 09001-20260 NUT, TIMER ROUND ME703450
010. [06] 94904-70620 BOLT, W/WASHER ME703359
011. [01] 90200-06511 WASHER, PLATE ME703364
012. [01] 09009-90241 SWITCH KIT, CONTRO ME016025
013. [02] 09028-50021 CAP ME035845
016. [01] 09180-01710 TIMER ASSY, AUTOMA ME016163
017. [01] 09006-00180 COVER SUB-ASSY, TI ME016070
018. [01] 94914-03990 O-RING MH035501
019. [04] 94901-15020 WASHER, STEEL PLAT MH005068
020. [04] 90258-10001 WASHER, SPRING MC327716
021. [04] 91266-10081 NUT, HEXAGON MF430122

Include in #3:

09300-00640 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09300-00640  ME016182  PUMP ASSY, INJECTI
ME016182    MITSUBISHI PUMP ASSY, INJECTI




Information:

1. Disconnect air line (1) at fitting. Remove two bolts (2). Pull up and toward the front of the engine to remove the bolt of the fuel ratio from the groove (slot) in the collar for the governor. Remove fuel ratio control (3). Remove gasket from fuel ratio control.2. Install a new gasket on fuel ratio control. Install fuel ratio control (3). Make sure bolt engages with stop collar in governor control.3. Install two bolts (2). Connect air line (1) at fitting.4. Make sure the fuel ratio control is in correct adjustment. See Systems Operation Testing & Adjusting Manual for this procedure.5. Install a new governor seal.Disassemble Fuel Ratio Control
Start By:a. remove fuel ratio control 1. Remove two bolts (1) and the housing (2). 2. Remove valve assembly (3).3. Remove seal (4) and O-ring seal from valve.4. Remove the retainer (5) and two springs (6). 5. Remove three bolts (9) and cover (10).6. Remove valve (7), diaphragm (8), retainer and spring. 7. Remove pin (12) from valve (7).8. Remove cover (11) from the valve.9. Remove the seal from the cover (11).Assemble Fuel Ratio Control
1. Put clean engine oil on lip of seal. Install the seal (1) in cover (2). Install seal so lip of seal is toward the inside of the cover. 2. Install the valve (3) into cover (2).3. Install the pin that holds cover on valve. 4. Install spring (7) and the retainer (6) in cover (8).5. Install diaphragm (5) on the valve assembly (4) and in the cover. 6. Install cover and three bolts (11) that hold covers together.7. Put clean engine oil on seal and ring seal. Install the seals (10) on valve.8. Install the two springs (13), retainer and valve assembly (12).9. Install housing (9) and two bolts.
Correct adjustment must be made to fuel ratio control before installation. See Systems Operation Testing & Adjusting for this procedure.
End By:a. install fuel ratio control

Have questions with 09300-00640?





09300-00630 PUMP ASSY, INJECTI 09300-00620 09300-00610 09300-00600 09300-00590
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09300-00640

Back to top