Fuel injectors
  1. Home
  2. denso
  3. #09280-00061

09280-00061 TIMER ASSY, HYDRAU Denso Cross


 

Information timer assy, hydrau

09280-00061 TIMER ASSY, HYDRAU
Rating:
5
Buy TIMER ASSY, HYDRAU 09280-00061 genuine, new aftermarket engine parts with delivery

Scheme ###:

TIMER ASSY, HYDRAU
000. [01] 09280-00060 TIMER ASSY, HYDRAU ME728025
000. [01] 09280-00061 TIMER ASSY, HYDRAU ME728025
001. [01] 09281-00020 HOUSING SUB-ASSY, ME736011
001. [01] 09281-00040 HOUSING SUB-ASSY,
002. [04] 94901-03740 WASHER ME736013
003. [04] 94904-43320 BOLT ME736014
004. [01] 09181-11320 HUB, TIMER ME736015
005. [01] 09283-50050 SHIFTER SUB-ASSY ME736016
005-001. [02] 09283-60030 SHIFTER SUB-ASSY ME736017
005-002. [02] 09188-40100 SUPPORT, TIMER SPR ME736018
005-003. [04] 09181-70150 SEAT ME736019
005-004. [04] 94907-11170 WASHER, SNAP ME736020
005-005. [04] 09181-91690 SPRING, TIMER ME736021
005-006. [04] 09181-70160 SEAT ME736022
006. [01] 09184-00920 FLANGE, TIMER DRIV ME736023
007. [01] 09185-60380 COVER, TIMER ME736024
007. [01] 09185-60450 COVER, TIMER
008. [02] 09189-50030 CAM, TIMER ME736025
009. [02] 09189-50040 CAM, TIMER ME736026
010. [01] 09283-10020 SLEEVE ME736027
011. [01] 94914-05340 O-RING ME736028
012. [06] 94901-40300 WASHER, COUNTERSUN ME736029
013. [06] 94904-43260 BOLT ME736030
014. [01] 09286-00020 BRACKET SUB-ASSY ME736031
015. [02] 94904-75500 BOLT, W/WASHER ME736032
016. [1C] 94901-31300 WASHER, PLATE, SK ME736033
016. [1C] 94901-31290 WASHER, PLATE, SK ME736034
017. [01] 09083-90020 PACKING ME702237
017. [01] 09083-90040 PACKING ME736036
018. [01] 09188-50020 SCREW, TIMER OIL S ME702243
019. [01] 94918-00310 SCREW, HOLLOW ME702236
020. [02] 09022-20070 WASHER, FUEL PIPE ME702217
021. [01] 07630-01020 PICKUP ASSY, TACHO ME728148
022. [01] 94914-04250 O-RING ME736037
023. [01] 07630-01030 PICKUP ASSY, TACHO ME728149
024. [02] 90200-06001 WASHER, PLATE ME023401
026. [01] 09282-90010 BAND, DUST
030. [01] 09289-90030 OVER-HOLE KIT, TIM

Include in #3:

09280-00061 as TIMER ASSY, HYDRAU
19100-06613
19100-08351
19100-08361
19100-08800
19100-08810
19100-08820

Cross reference number



Part num Firm num Firm Name
09280-00061  ME728025  TIMER ASSY, HYDRAU




Information:

1. Put the fuel injection pump housing and governor in position on Tool (A).2. Remove the bolts, fuel ratio control (1) and shutoff solenoid (2) from rear governor housing (3).3. Remove the bolts, rear governor housing (3) and the gasket from the front governor housing. 4. Remove governor spring (4), the two wave washers, one flat washer and the seat from the guide in the rear governor housing. 5. Remove bolt (5) that holds lever assembly (6) to the shaft assembly. There is a key in the slot groove of the shaft assembly that must be removed before the shaft assembly is removed from the rear governor housing.6. Remove shaft assembly (7), lever (6) and lever (8) from the rear governor housing. Put an alignment mark on lever (9) for correct assembly purposes.7. Remove bolt (10), lever assembly (9) and spring (11) from shaft assembly (7). 8. Remove plug (12) and lip-type seal (13) from the housing. Spacers (14) and (16) are different sizes. Make sure they are assembled in the correct position.9. Use needle nose pliers, and remove the shaft. Remove spacer (14), lever (15) and spacer (16) from the governor housing. 10. Remove two setscrews and locknuts (17) if necessary. 11. Release spring (18) from the notch in the housing. Remove snap ring (19), and remove shaft (20) from the housing. Remove lever (21) and spring (18). 12. Remove liptype seal (22) from the housing. 13. If necessary, remove the screws, cover (23) and the gasket from the governor housing. 14. Remove high idle cover (24) and three O-ring seals (25). 15. Remove liptype seal (26), dashpot valve (27), fitting (25), insulator and high idle adjustment (28) from the rear housing. 16. Remove two bolts (29), housing (30) and the gasket from the fuel pump housing. 17. Remove bolts (31), and remove torque control group (32) from the block.
Depending on the different engine applications, torque control groups will vary. Inspect all parts for wear and damage, and make a note of the correct sequence of the parts for assembly purposes.
For additional information, see Specifications Manual SENR6470. 18. Remove the bolts and block (33) for the full load stop from the housing. 19. Remove the bolt that holds collar (35) to bolt (36).20. Remove collar (35) and spring (34) from bolt (36). Remove bolt (36) from the block.21. If necessary, remove the stop screw and the power setting screw from collar (35). It may be necessary to turn the piston to remove the servo from the rack.22. Remove the three bolts and governor servo (37) from the fuel injection pump housing. 23. Remove lockring (43), seat (42), spring (41) and sleeve (40) from valve (39). Remove lockring (38) from the groove in the center of valve (39). 24. Remove sleeve (44), valve (45) and piston (46) from the governor servo. Remove O-ring seal (50) from sleeve (44). Do not remove pin (47). If pin (47) and lever (48) or cylinder (49) are worn or damaged replace the

Have questions with 09280-00061?





09280-00060 TIMER ASSY, HYDRAU 09280-00050 09280-00040 09280-00030 09280-00020
01800840 TIMER ASSY, AUTOMA 09180-00780 09180-00841 09180-00870 09180-00970

Group cross 09280-00061

Back to top