Information pump assy, fuel fe
Rating:
KIT List:
| Pump assy, fuel fe | 1922900060 |
| Pump assy, fuel fe | 1922900060 |
| Pump assy, fuel fe | 1922900060 |
| Pump assy, fuel fe | 1922900060 |
| Pump assy, fuel fe | 1922900060 |
| Pump assy, fuel fe | 1922900060 |
Scheme ###:
| 000. | [01] | 09210-02790 | PUMP ASSY, FUEL FE | |
| 002. | [01] | 09212-00650 | HOUSING SUB-ASSY, | |
| 002-001. | [01] | 09216-80150 | ROD, FEED PUMP PUS | |
| 002-002. | [01] | 94915-02700 | SEAL, OIL | |
| 003. | [02] | 09212-10011 | VALVE, FEED PUMP C | |
| 004. | [02] | 09212-40010 | SPRING, FEED PUMP | |
| 005. | [03] | 09212-50010 | GASKET, CHECK VALV | |
| 006. | [01] | 09212-60010 | PLUG, FEED PUMP CH | |
| 007. | [01] | 09213-00271 | PUMP SUB-ASSY, PRI | |
| 008. | [01] | 09217-10011 | PISTON, FEED PUMP | |
| 009. | [01] | 09217-40050 | TAPPET, FEED PUMP | |
| 010. | [01] | 09217-60010 | ROLLER, FEED PUMP | |
| 011. | [01] | 09217-80040 | PIN, FEED PUMP TAP | |
| 012. | [02] | 09217-90070 | BLOCK, FEED PUMP T | |
| 013. | [01] | 09218-20050 | SPRING, FEED PUMP | |
| 014. | [01] | 09218-40021 | PLUG, FEED PUMP PI | |
| 015. | [01] | 09013-90030 | O-RING | |
| 016. | [01] | 09007-30060 | NIPPLE, ELBOW | |
| 018. | [01] | 94901-81240 | WASHER, COPPER PLA | |
| 020. | [01] | 94907-20940 | RING, SNAP | |
| 022. | [01] | 09216-00020 | HOLDER SUB-ASSY, V |
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09210-02790 | PUMP ASSY, FUEL FE |
Information:
Table 1
Repair Kit Part Numbers for Quick Connect DEF Line Fittings
473-2053 5/16"-90 Degree Kit
473-2055 5/16"- Straight Kit
473-2056 3/8"-90 Degree Kit
473-2057 3/8"- Straight Kit Rework Procedure
Table 2
Required Tools
Part Number Part Name
1U-7648 Tube Cutter
Illustration 1 g06433660
Cut the connector end on the corrugated section with the cutter.
Illustration 2 g06433665
Cut the two wires with a tie cutter.
Illustration 3 g06433668
Use a knife or sharp blade to cut the outer sheathing off. Ensure not to cut or damage the inner fluid hose.
Illustration 4 g06433669
Install the hose clamp provided first before installing the connector. Use appropriate size (3/8th or 5/16th) and type (90 degree or straight) fitting.
Illustration 5 g06433672
Fasten the clamp until the two jaws are either in contact or about 2 to 3 mm (0.08 to 0.1 inch) apart.