Information pump assy, fuel fe
Rating:
Scheme ###:
| 000. | [01] | 09210-00480 | PUMP ASSY, FUEL FE | 6 075 1500 31 |
| 003. | [01] | 09212-00130 | HOUSING SUB-ASSY, | |
| 003-001. | [01] | 09216-80150 | ROD, FEED PUMP PUS | 22565-1250A |
| 003-001. | [1C] | 09216-80070 | ROD, FEED PUMP PUS | 22565-1190A |
| 003-001. | [1C] | 09216-80060 | ROD, FEED PUMP PUS | 22565-1180A |
| 003-001. | [1C] | 09216-80050 | ROD, FEED PUMP PUS | 22565-1170A |
| 003-001. | [1C] | 09216-80040 | ROD, FEED PUMP PUS | 22565-1160A |
| 003-001. | [1C] | 09216-80030 | ROD, FEED PUMP PUS | 22565-1150A |
| 003-001. | [1C] | 09216-80010 | ROD, FEED PUMP PUS | 22565-1140A |
| 003-002. | [01] | 94915-00970 | SEAL, OIL | 22827-1090A |
| 003-002. | [01] | 94915-02700 | SEAL, OIL | 22827-1700A |
| 005. | [02] | 09212-10011 | VALVE, FEED PUMP C | 22563-1041A |
| 006. | [02] | 09212-40010 | SPRING, FEED PUMP | 22562-1020A |
| 007. | [02] | 09212-50010 | GASKET, CHECK VALV | 22847-1680A |
| 008. | [01] | 09212-60010 | PLUG, FEED PUMP CH | 22845-1350A |
| 009. | [01] | 09213-00220 | PUMP SUB-ASSY, PRI | 22509-1160A |
| 011. | [01] | 09217-10011 | PISTON, FEED PUMP | 22566-1200A |
| 013. | [01] | 09217-60021 | ROLLER, FEED PUMP | 22569-1070A |
| 014. | [01] | 09217-80030 | PIN, FEED PUMP TAP | 22571-1060A |
| 015. | [02] | 09217-90080 | BLOCK, FEED PUMP T | 22572-1150A |
| 016. | [01] | 94907-20940 | RING, SNAP | 22887-1160A |
| 018. | [01] | 94901-81240 | WASHER, COPPER PLA | 22847-1690A |
| 019. | [01] | 09218-40021 | PLUG, FEED PUMP PI | 22845-1360A |
| 020. | [01] | 09222-30070 | SCREW, FUEL PIPE H | 22835-1370A |
| 021. | [01] | 09222-00040 | FILTER, FEED PUMP | 22574-1040A |
| 022. | [01] | 94918-00310 | SCREW, HOLLOW | S2283-51310-A |
| 023. | [04] | 94901-02490 | WASHER | 22877-1100A |
| 024. | [01] | 09217-40041 | TAPPET, FEED PUMP | 22568-1151A |
| 025. | [01] | 09218-20020 | SPRING, FEED PUMP | 22567-1070A |
Include in #3:
09000-04231
as PUMP ASSY, FUEL FE
09210-00480
Cross reference number
| Part num | Firm num | Firm | Name |
| 09210-00480 | 6 075 1500 | PUMP ASSY, FUEL FE | |
| 6 075 1500 31 | HINO | PUMP ASSY, FUEL FE |
Information:
AUGUST 2011
INFORMATION RELEASE MEMO
Reman
PELJ1306 ?2011 Caterpillar REMAN DIESEL PARTICULATE FILTERS FOR MACHINE APPLICATIONS
To provide our customers with cost effective service options to support their Tier 4 emissions engines, Cat Reman has released a Reman version of the diesel particulate filters (DPF) used on many Tier 4 Cat? machines. The DPF traps both soot and ash. Soot is removed through a regeneration process outlined in the machines operation and maintenance manual. Ash that accumulates from engine oil is removed through a cleaning procedure that requires removal of the DPF from the machine. The cleaning procedure requires the DPF to be removed from the machine. Special Instruction REHS5045 outlines the three approved processes for performing the required Diesel Particulate Filter (DPF) maintenance on Tier 4 products equipped with a DPF.
Replacement of the existing DPF with a new Cat DPF
Replacement of the existing DPF with a remanufactured Cat DPF
Removal of the existing DPF and having the DPF cleaned by a Cat approved cleaning device.
The Reman DPFs listed below are available to support these maintenance requirements:
Core Acceptance
After gaining some experience with the previously released DPFs used for on-highway engines and to support the launch of these additional machine DPFs, we have changed some of the inspection criteria and issued a revision to SELD0292. SELD0292-02 Caterpillar Diesel Particulate Filter (DPF) is the current Core Acceptance Criteria (CAC). It is critical to avoid non-operational damage that can decrease the value of the cores. Encourage service technicians to handle and package the cores with care so they will be more likely to be eligible for the full core refunds. Please always refer to the most current version at catreman.cat.com/core to view the latest requirements. The acceptability inspection for these is a simple visual inspection based on the following guidelines:
Warranty
All Reman products carry the same warranty as new parts. Please consult the appropriate warranty statement for your area.
Core Management
Please refer to the Cat Core Management Information System (CMIS 2) related to the parts information application that describes all Reman part/Core Acceptability Family (CAF) and other related information. Also refer to other CMIS 2 inquiry applications such as: Dealer Customer Profile, Inspection Reason Codes, Inspection Line Inquiry, Dealer Add Charges, Dealer Entitlement Activity, Dealer CCR Inquiry, Dealer CCR Entry, Dealer Shipment Processing, Dealer Process Packaging Grief and Reporting. This information is available to all dealers worldwide that have been converted to CMIS 2.
Please go to the Reman web site https://catreman.cat.com for the latest policy and procedural updates that are available to all dealers worldwide explaining policy and procedural information such as Policy and Core Management SELD0122 -10, "Core Management Systems and Operations Procedures SELD0040-14, "Reman Core Return Packaging Instructions And Guidelines SELD0300-00 and "Shipping Instructions" SELD0039-14.
If you have any questions regarding Reman Core Management or Core Management Systems (CMIS2),