09200-05560 PUMP ASSY, INJECTI Denso Cross

Information pump assy, injecti

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy PUMP ASSY, INJECTI 09200-05560 genuine, new aftermarket engine parts with delivery

KIT List:

Governor assy, mec	1908900720
Pump assy, fuel fe	1922900070

Components :

001.	PUMP ASSY, INJECTI	09200-05560
002.	GOVERNOR ASSY, MEC	09130-07710
003.	LEVER SET	09129-10581
004.	COMPENSATOR SUB-AS	19260-01830
005.	TIMER ASSY, AUTOMA	09180-04240
006.	PUMP ASSY, FUEL FE	09210-03271
007.	COUPLING ASSY	09250-01061

Scheme ###:

000.	[01]	09200-05560	PUMP ASSY, INJECTI	22010-E0120
003.	[01]	19010-02020	BODY ASSY, INJECTI	S2211-03870-A
004.	[01]	09130-07710	GOVERNOR ASSY, MEC	S2231-07270-A
005.	[01]	09180-04240	TIMER ASSY, AUTOMA
006.	[01]	09001-20340	NUT, TIMER ROUND	S2282-52240-A
007.	[01]	09250-01061	COUPLING ASSY	S2261-01860-A
008.	[01]	90458-05750	KEY, WOODRUFF	S2289-11070-A
009.	[01]	09210-03271	PUMP ASSY, FUEL FE	S2257-01860-A
010.	[01]	09001-80381	COVER, CONTROL RAC	S2211-41200-A
011.	[01]	94901-81550	WASHER, COPPER PLA	SL722-02215
012.	[01]	94904-76900	BOLT, W/WASHER	S2281-53230-A
013.	[04]	94904-76890	BOLT, W/WASHER	S2281-53210-A
014.	[01]	94904-76910	BOLT, W/WASHER	S2281-53240-A
015.	[02]	94904-76880	BOLT, W/WASHER	S2281-53320-A
019.	[02]	09028-50030	CAP	S2232-31210-A
020.	[01]	09028-50050	CAP	S2232-31430-A
021.	[01]	09031-00450	VALVE ASSY, OVERFL	S2210-71570-A
022.	[02]	94901-02480	WASHER	S2284-71940-A
023.	[01]	09045-30160	STAY, INJECTION PU	S1140-91261-A
024.	[02]	91418-08351	BOLT, W/WASHER	S2281-53380-A
025.	[01]	09069-01130	BRACKET SUB-ASSY,	S2376-82650-A
026.	[02]	91808-08121	BOLT, FLANGE	S2281-53330-A

Include in #3:

09200-05560 as PUMP ASSY, INJECTI

Cross reference number

Part num	Firm num	Firm	Name
09200-05560	22010-E012		PUMP ASSY, INJECTI
22010-E0120		HINO	PUMP ASSY, INJECTI

Information:

Start By:a. remove radiator 1. Remove the four bolts and remove fan blade (1) and extension. 2. Loosen bolts (2) and remove fan belt (4). Loosen clamps (3) and disconnect the two hoses. Remove nut (5) from water pump fan pulley (6). 3. Install tooling (A) and remove fan pulley (6). 4. Remove four bolts (7) and remove the water pump and gasket. At the time of assembly, tighten nut (5) to the torque of 80 N m (60 lb.ft.) Install in the reverse order.Disassemble Water Pump
Start By:a. remove water pump 1. Remove key (1) from the shaft. 2. Remove pump housing (2) from the rear housing. 3. Remove snap ring (3) with tool (A). 4. Put the water pump housing in position on a press. Install tool (B) and remove the shaft assembly from the impeller and water pump housing. 5. Remove seals (4) from the water pump housing if they are damaged. 6. Put shaft assembly (5) in position in a press. Install tool (B) and remove bearings (6) and spacer (7) from the shaft.Assemble Water Pump
1. Put one of the shaft's bearings in position in a press. Make sure there is support for the inner race of the bearing. Push shaft (1) on to bearing (2). 2. Install spacer (4) on the shaft. Put second bearing (3) in position and push the shaft on to it. 3. Install seal (6) and flange (5) in the water pump housing. 4. Put 2S3230 Bearing Lubricant on the bearings. Put the water pump housing in position on a press and install shaft assembly (7) in the housing. 5. Install snap ring (8) over the bearings with tool (A). 6. Install the water seal in the housing with tooling (B). 7. Install seal (9) on the shaft assembly. 8. Install impeller (10) on the shaft with tooling (C) and a press. The clearance between the impeller blade and pump body must be 0.30 to 0.81 mm (.012 to .032 in). 9. Install a new gasket on water pump housing (12). Install housing (12) on the rear housing with nuts (11) that hold it. 10. Install key (13) in the shaft.End By:a. install water pump

Have questions with 09200-05560?

09210-05010 PUMP ASSY, FUEL FE 09210-05000 09210-03440 09210-03420 09210-03390

01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252