Fuel injectors
  1. Home
  2. denso
  3. #09200-05530

09200-05530 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935008100
09200-05530 PUMP ASSY, INJECTI
Rating:
15
Buy PUMP ASSY, INJECTI 09200-05530 genuine, new aftermarket engine parts with delivery

KIT List:

Governor assy, mec 1908900720
Timer assy, automa No Application
Pump assy, fuel fe 1922900070
Body assy, injecti 1904400380

Components :

001. PUMP ASSY, INJECTI 09200-05530
002. GOVERNOR ASSY, MEC 09130-07620
003. TIMER ASSY, AUTOMA 09180-03860
004. PUMP ASSY, FUEL FE 09210-03190
005. COUPLING ASSY 09250-01061
006. BODY ASSY, INJECTI 19010-02000
007. COVER, BEARING 09020-10430

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09200-05530 PUMP ASSY, INJECTI 22010-E0020
003. [01] 19010-02000 BODY ASSY, INJECTI
004. [01] 09130-07620 GOVERNOR ASSY, MEC
005. [01] 09180-03860 TIMER ASSY, AUTOMA S2251-02830-A
006. [01] 09001-20340 NUT, TIMER ROUND S2282-52240-A
007. [01] 09250-01061 COUPLING ASSY S2261-01860-A
008. [01] 90458-05750 KEY, WOODRUFF S2289-11070-A
009. [01] 09210-03190 PUMP ASSY, FUEL FE S2257-01750-A
010. [01] 09001-80381 COVER, CONTROL RAC S2211-41200-A
011. [01] 94901-81550 WASHER, COPPER PLA SL722-02215
012. [01] 94904-76900 BOLT, W/WASHER S2281-53230-A
013. [04] 94904-76890 BOLT, W/WASHER S2281-53210-A
014. [01] 94904-76910 BOLT, W/WASHER S2281-53240-A
015. [02] 94904-76880 BOLT, W/WASHER S2281-53320-A
018. [01] 09028-50030 CAP S2232-31210-A
019. [01] 09028-50050 CAP S2232-31430-A
021. [02] 94901-02480 WASHER S2284-71940-A
022. [01] 09031-00450 VALVE ASSY, OVERFL S2210-71570-A
025. [02] 91808-08201 BOLT, FLANGE S2281-53390-A
026. [01] 09045-30190 STAY, INJECTION PU S1140-91270-C
027. [01] 09028-50030 CAP S2232-31210-A

Include in #3:

09200-05530 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09200-05530  22010-E002  PUMP ASSY, INJECTI
22010-E0020    HINO PUMP ASSY, INJECTI




Information:

1. Disconnect electrical plug (1) and throttle linkage (2).2. Disconnect six fuel lines (3) from injection pump. 3. Remove inspection plate (5) from the timing gear cover. 4. Make an alingment of the timing marks on fuel injection pump gear (7) and idler gear (6), or put identification marks on the gears for correct installation. 5. Remove three bolts (8) that hold the fuel injection pump drive gear to the fuel injection pump.
Typical Example6. Put alignment marks on the fuel injection pump and the timing gear case cover as shown. Remove three nuts (9) and washers that hold the fuel injection pump in place. Remove fuel injection pump (10). Remove the gasket from the timing gear case. The following steps are for the installation of the fuel injection pump.7. Put the gasket for fuel injection pump (10) in position on the timing gear case. 8. Position the fuel injection pump; be sure dowel (11) in fuel injection pump gear (7) is in alignment with the groove (slot) in the fuel injection pump shaft when the fuel injection pump is put in position.
Typical Example9. For initial fuel injection pump timing, make an alignment of the reference marks on the fuel injection pump and the timing gear case. Install the three nuts (9) and washers that hold fuel injection pump (10) in place. 10. Be sure the timing marks or the marks that were put on the fuel injection pump gear and idler gear are in alignment. Install three bolts (8) that hold the fuel injection pump gear to the fuel injection pump. 11. Install plate (5) with a new gasket.12 Connect all fuel lines (3), control linkage (2) and electrical plug (1).13. Prime the fuel system. See the MAINTENANCE MANUAL.

Have questions with 09200-05530?





09210-05010 PUMP ASSY, FUEL FE 09210-05000 09210-03440 09210-03420 09210-03390
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09200-05530

Back to top