Information pump assy, injecti
Rating:
Scheme ###:
| 000. | [01] | 09200-02851 | PUMP ASSY, INJECTI | 22010-8130 |
| 000. | [01] | 09200-02851 | PUMP ASSY, INJECTI | S2201-08131 |
| 003. | [01] | 09210-03170 | PUMP ASSY, FUEL FE | |
| 004. | [01] | 09031-00380 | VALVE ASSY, OVERFL | 22107-1430A |
| 005. | [02] | 94901-02480 | WASHER | 22847-1940A |
| 006. | [01] | 09001-80090 | COVER, CONTROL RAC | 22114-1250A |
| 007. | [05] | 94904-72690 | BOLT, W/WASHER | 22815-2410A |
| 009. | [01] | 91418-06201 | BOLT, W/WASHER | 22815-1290A |
| 010. | [01] | 09028-50030 | CAP | 22323-1210A |
| 011. | [01] | 94904-73910 | BOLT, W/WASHER | 22815-2820A |
| 012. | [01] | 19010-01200 | BODY ASSY, INJECTI | |
| 013. | [01] | 09250-01051 | COUPLING ASSY | 22610-1810A |
| 014. | [01] | 09001-20220 | NUT, TIMER ROUND | |
| 015. | [01] | 09180-03580 | TIMER ASSY, AUTOMA | 22510-2700A |
| 017. | [01] | 90458-04051 | KEY, WOODRUFF | 22895-1080A |
| 018. | [01] | 09130-04981 | GOVERNOR ASSY, MEC | 22310-5460A |
| 019. | [01] | 09028-50050 | CAP | 22323-1430A |
Include in #3:
09200-02851
as PUMP ASSY, INJECTI
09200-02851
Cross reference number
| Part num | Firm num | Firm | Name |
| 09200-02851 | 22010-8130 | PUMP ASSY, INJECTI |
Information:
Disassemble Fuel Injection Pump Housing
Start By:a. disassemble governorb. remove fuel injection pumps 1. Remove cover (1) from the fuel injection pump housing. 2. Remove rack (2) from the fuel injection pump housing.
If the original lifters are to be installed in the fuel injection pump housing, put identification marks on them as to their location in the housing.
3. Remove lifters (3) from the fuel injection pump housing. 4. Put the fuel injection pump housing on end on blocks, and use Tool (A) to remove snap ring (4) from the camshaft. 5. Use a soft hammer
Start By:a. disassemble governorb. remove fuel injection pumps 1. Remove cover (1) from the fuel injection pump housing. 2. Remove rack (2) from the fuel injection pump housing.
If the original lifters are to be installed in the fuel injection pump housing, put identification marks on them as to their location in the housing.
3. Remove lifters (3) from the fuel injection pump housing. 4. Put the fuel injection pump housing on end on blocks, and use Tool (A) to remove snap ring (4) from the camshaft. 5. Use a soft hammer