09200-00894 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

09200-00894 PUMP ASSY, INJECTI
Rating:
32
Buy PUMP ASSY, INJECTI 09200-00894 genuine, new aftermarket engine parts with delivery

Scheme ###:

000. [01] 09200-00893 PUMP ASSY, INJECTI 32B6535060
000. [01] 09200-00894 PUMP ASSY, INJECTI 32B6545060
005. [01] 19010-00380 BODY ASSY, INJECTI
006. [01] 19080-04363 GOVERNOR ASSY, MEC
006. [01] 19080-06620 GOVERNOR ASSY, MEC
007. [01] 09001-80081 COVER, CONTROL RAC 09001-80081
008. [01] 94905-03570 NUT, HEXAGON
009. [01] 94913-00300 KEY, WOODRUFF
010. [01] 94901-50590 WASHER, SPRING
012. [01] 09210-01471 PUMP ASSY, FUEL FE
013. [01] 91518-08221 BOLT, W/WASHER 91518-08221
014. [06] 91518-06161 BOLT, W/WASHER
014. [06] 91418-06161 BOLT, W/WASHER 91418-06161

Include in #3:

09200-00894 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09200-00894  32B6545060  PUMP ASSY, INJECTI




Information:

Remove Valves
Start By:a. remove fuel injection nozzlesb. remove cylinder head assembly and spacer plate 1. Put compression on valve spring (2) with Tool (A). Remove locks (1).2. Remove Tool (A), rotocoil, spring, valve stem oil shield and valve. Put identification marks on valves with respect to their location in the cylinder head. 3. Check the spring force with Tool (B). The spring force is 257 25 N (57.8 5.6 lb). The length of spring under test force is 44.86 mm (1.766 in). The free length after test is 52.07 mm (2.050 in).4. Do Steps 1 through 3 again for the remainder of the valves.Install Valves
1. Put clean engine oil on the valve stems. Install valve (3), oil shield (4), spring (2) and rotocoil (1) in the cylinder head. 2. Put Tool (A) in position on the valve spring. Install the locks with Tool (B).
Locks can be thrown from valve when the compressor is released if they are not in their correct position on valve stem. Personal injury can be the result if not carefully removed.
3. Remove Tool (A), and hit the top of valve with a plastic hammer to be sure the locks are in their correct position on valve.4. Do Steps 1 through 3 again for the remainder of the valves.End By:a. install cylinder head assembly and spacer plateb. install fuel injection nozzles

Have questions with 09200-00894?





Group cross 09200-00894

Back to top