Information over-haue kit, tim
Rating:
Components :
| 001. | OVER-HAUE KIT, TIM | 09180-30020 |
Scheme ###:
| 000. | [01] | 09180-30020 | OVER-HAUE KIT, TIM | |
| 001. | [01] | 94915-02320 | SEAL, OIL | |
| 002. | [01] | 94914-05090 | O-RING | |
| 003. | [02] | 94901-81130 | WASHER, COPPER PLA | |
| 004. | [01] | 94901-81500 | WASHER, COPPER PLA | |
| 005. | [01] | 09083-90040 | PACKING | |
| 006. | [01] | 94914-05080 | O-RING | |
| 007. | [01] | 94901-40070 | WASHER, COUNTERSUN |
Include in #3:
09180-30020
as OVER-HAUE KIT, TIM
Cross reference number
| Part num | Firm num | Firm | Name |
| 09180-30020 | OVER-HAUE KIT, TIM |
Use as kit:
| 0918002090 | 0918002090 | Timer assy, automa | 0918030020 |
| 1910000550 | 0918002090 | Timer assy, automa | 0918030020 |
Information:
Piston Pin Bearing Removal And Installation (Connecting rods that have straight sides on the piston pin end).
The 5P8639 Press Group and the 5P8655 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P8654 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the
The 5P8639 Press Group and the 5P8655 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P8654 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the