Fuel injectors
  1. Home
  2. denso
  3. #09180-04010

09180-04010 TIMER ASSY, AUTOMA Denso Cross


 

Information timer assy, automa

09180-04010 TIMER ASSY, AUTOMA
Rating:
10
Buy TIMER ASSY, AUTOMA 09180-04010 genuine, new aftermarket engine parts with delivery

KIT List:

Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application

Scheme ###:

TIMER ASSY, AUTOMA
000. [01] 09180-04010 TIMER ASSY, AUTOMA S2251-02900
001. [01] 09181-11590 HUB, TIMER S2251-61770-A
002. [02] 09183-61310 WEIGHT SUB-ASSY, T S2251-44100-A
003. [02] 09189-50290 CAM, TIMER S2254-51430-A
004. [02] 09189-50300 CAM, TIMER S2254-51440-A
005. [04] 94907-10880 WASHER, SNAP S2251-81110-A
006. [01] 09184-01090 FLANGE, TIMER DRIV S2251-32680-A
006-001. [01] 94915-02910 SEAL, OIL S2282-71680-A
007. [4C] 09181-93270 SPRING, TIMER S2251-56830-A
007. [4C] 09181-93360 SPRING, TIMER S2251-56840-A
008. [4C] 09181-81620 SPRING, TIMER SUB S2251-56850-A
008. [4C] 09181-81630 SPRING, TIMER SUB 22515-6860A
009. [8C] 94901-38920 WASHER, PLATE, SK S2288-57350-A
009. [8C] 94901-38910 WASHER, PLATE, SK S2288-57340-A
009. [8C] 94901-38200 WASHER, PLATE, SK S2288-55890-A
009. [8C] 94901-38190 WASHER, PLATE, SK S2288-55880-A
009. [8C] 94901-38180 WASHER, PLATE, SK S2288-55870-A
011. [01] 94914-06430 O-RING S2281-71970-A
012. [02] 09188-40110 SUPPORT, TIMER SPR S2253-51140-A
013. [01] 09187-00210 COVER SUB-ASSY, TI 22867-1830A
013. [01] 09187-00250 COVER SUB-ASSY, TI S2250-11380-A
013-001. [01] 94915-02920 SEAL, OIL S2282-71690-A
014. [01] 09186-70351 PLATE, TIMER DRIVI S2251-32690-A
015. [04] 09181-70310 SEAT S2251-71510-A
016. [02] 09188-20121 ROLLER, TIMER S2252-21100-A
017. [02] 94901-81020 WASHER, COPPER PLA S2286-71500-A
018. [02] 09186-20010 SCREW, TIMER HUB S2286-51270-A
019. [04] 09181-70600 SEAT S2251-71860-A

Include in #3:

09180-04010 as TIMER ASSY, AUTOMA
29300-00368
29300-00378
29300-00434
29300-00444
29300-00454
29300-00511

Cross reference number



Part num Firm num Firm Name
09180-04010  S2251-0290  TIMER ASSY, AUTOMA
22510-2900A    HINO TIMER ASSY, AUTOMA
S2251-02900    HINO TIMER ASSY, AUTOMA
S2251-02900-A    HINO TIMER ASSY, AUTOMA




Information:

Introduction
This Special Instruction contains information for installing the Marine Fuel Flow Enclosure System on all Caterpillar and non-Caterpillar diesel engines. The Marine Fuel Flow Enclosure System will measure the amount of diesel fuel used by an engine. The system consists of two Fuel Flow Transducers and an Electronic Control Module (ECM) The ECM will measure/calculate the amount of fuel that is used, and will transmit this data, along with diagnostic information, on the main J1939 data link, Ethernet or Cat Data Link to be received by a recording ECM such as Product LinkSafety Section
Do not perform any procedure in this Special Instruction until you have read Special Instruction and you understand this information. Use only proper tools and observe all precautions that pertain to the use of those tools. Failure to follow these procedures can result in personal injury. The following procedures should also be observed.Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. The installer must be alert to potential hazards and have the necessary training, skills, and tools needed to perform these functions properly. Wear safety equipment, such as eye protection, foot protection, and other protection as is appropriate to the work site.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. Ensure that any tool, procedure, work method, or operating technique you use that is not recommended by Caterpillar is safe. Ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.
Personal injury or death can result from improper assembly procedures.Do not attempt any assembly until you have read and understand the assembly instructions.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Prepare the Machine
If the machine is portable, then move the machine to a smooth, level surface that will support the weight of the machine.
Turn off the machine with the engine switch to the OFF position.
Use proper Lock out and Tag out procedures. Attach a "Do Not Operate" warning tag to the machine start switch or the controls before you perform any service to the machine. These warning tags Special Instruction, SEHS7332 are

Have questions with 09180-04010?





09180-04001 TIMER ASSY, AUTOMA 09180-03990 09180-03980 09180-03972 09180-03960
01800840 TIMER ASSY, AUTOMA 09180-00780 09180-00841 09180-00870 09180-00970

Group cross 09180-04010

Back to top