09180-03710 TIMER ASSY, AUTOMA Denso Cross


 

Information timer assy, automa

09180-03710 TIMER ASSY, AUTOMA
Rating:
32
Buy TIMER ASSY, AUTOMA 09180-03710 genuine, new aftermarket engine parts with delivery

KIT List:

Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application
Timer assy, automa No Application

Scheme ###:

000. [01] 09180-03710 TIMER ASSY, AUTOMA 22510-2810
000. [01] 09180-03710 TIMER ASSY, AUTOMA S2251-02810
001. [01] 09181-11890 HUB, TIMER 22516-1980A
002. [02] 09183-61100 WEIGHT SUB-ASSY, T 22514-3740A
003. [02] 09189-50250 CAM, TIMER 22545-1340A
004. [02] 09189-50260 CAM, TIMER 22545-1350A
005. [04] 94907-10880 WASHER, SNAP 22518-1110A
006. [01] 09184-01170 FLANGE, TIMER DRIV 22513-2500A
006-001. [01] 94915-02910 SEAL, OIL 22827-1680A
008. [04] 09181-81330 SPRING, TIMER SUB 22515-6090A
009. [02] 09188-40140 SUPPORT, TIMER SPR 22517-1590A
010. [01] 09187-00190 COVER SUB-ASSY, TI 22501-1210A
010. [01] 09187-00240 COVER SUB-ASSY, TI
010-001. [01] 94915-02920 SEAL, OIL 22827-1690A
011. [04] 09181-70290 SEAT 22517-1360A
012. [04] 09181-70440 SEAT 22517-1770A
013. [02] 09186-20010 SCREW, TIMER HUB 22865-1270A
014. [01] 09186-70240 PLATE, TIMER DRIVI 22513-2110A
015. [02] 09188-20030 ROLLER, TIMER 22522-1040A
016. [02] 94901-81020 WASHER, COPPER PLA 22847-1300A
017. [8C] 94901-38920 WASHER, PLATE, SK 22885-7350A
017. [8C] 94901-38910 WASHER, PLATE, SK 22885-7340A
017. [8C] 94901-38200 WASHER, PLATE, SK 22885-5890A
017. [8C] 94901-38190 WASHER, PLATE, SK 22885-5880A
017. [8C] 94901-38180 WASHER, PLATE, SK 22885-5870A
018. [01] 94914-03950 O-RING 22817-1930A

Include in #3:

09180-03710 as TIMER ASSY, AUTOMA
09180-03710

Cross reference number



Part num Firm num Firm Name
09180-03710  22510-2810  TIMER ASSY, AUTOMA
22510-2810A    HINO TIMER ASSY, AUTOMA
22510-2810    HINO TIMER ASSY, AUTOMA
S2251-02810    HINO TIMER ASSY, AUTOMA
S2251-02810-A    HINO TIMER ASSY, AUTOMA




Information:

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Failure to follow all safety guidelines prescribed in this document and by governing authorities and regulatory agencies may result in severe injury or death of personnel or machine damage.
When removing a major component or attachment, ensure that it is properly blocked or secured before removing mounting hardware. An assembly that is disconnected without proper blocking may shift or fall, resulting in serious injury or death of personnel or machine damage.
Personal injury or death can result from improper maintenance procedures. To avoid injury or death, follow the procedures exactly as stated below.
Personal injury can result from improper handling of chemicals.Make sure you use all the necessary protective equipment required to do the job.Make sure that you read and understand all directions and hazards described on the labels and material safety data sheet of any chemical that is used.Observe all safety precautions recommended by the chemical manufacturer for handling, storage, and disposal of chemicals.
Do not operate the machine if any guards or covers are missing or inadequately secured. Personnel could be seriously injured or machine damage may occur.
Observe the safe working load limits of all lifting and blocking devices and keep a safe distance from suspended/blocked loads. Personnel may be seriously injured or killed by falling loads.
Reference Section
Refer to Service Magazine, M0082326, "Diesel Exhaust Fluid (DEF) Contamination on C4.4 Machine Engines".Refer to Service Magazine, M0096547, "Diesel Exhaust Fluid (DEF) Pump Filter Maintenance on Certain C4.4 Machine Engines".Refer to Special Instruction, M0096185, "Diesel Exhaust Fluid (DEF) Pump Diesel Contamination Test on Certain C4.4 Engines".Problem
There have been instances of returned DEF pumps that have no fault found or indicating contamination.Resolution
Complete the form below and attach to any SIMSi claim in addition to a Product Status Report (PSR) from before any troubleshooting was performed or any diagnostic codes were cleared.
Use the electronic service tool to download a PSR with Histograms.
Enter the diagnostic codes that require troubleshooting: ___
Perform the correct troubleshooting procedure for any active diagnostic codes. Refer to Troubleshooting, Diagnostic Trouble Codes.
If the troubleshooting procedure requests that the DEF is tested for contamination or concentration , record the results in Table 1 and Table 2.
For other DEF-related troubleshooting procedures, follow the applicable troubleshooting steps and record the results in Table 3.
Table 1
DEF Contamination
Step Instruction Completed Result Units
1 Perform the test procedure for DEF contamination. Refer to Systems Operation, Testing and Adjusting, Diesel Exhaust Fluid Quality - Test.

Have questions with 09180-03710?





Group cross 09180-03710

Back to top