Fuel injectors
  1. Home
  2. denso
  3. #09180-03241

09180-03241 TIMER ASSY, AUTOMA Denso Cross


 

Information timer assy, automa

09180-03241 TIMER ASSY, AUTOMA
Rating:
33
Buy TIMER ASSY, AUTOMA 09180-03241 genuine, new aftermarket engine parts with delivery

Scheme ###:

TIMER ASSY, AUTOMA
000. [01] 09180-03240 TIMER ASSY, AUTOMA ME728984
000. [01] 09180-03241 TIMER ASSY, AUTOMA ME728984
001. [01] 09181-11641 HUB, TIMER ME736085
002. [02] 09183-60871 WEIGHT SUB-ASSY, T ME736086
002. [02] 09183-60872 WEIGHT SUB-ASSY, T ME736086
003. [02] 09189-50340 CAM, TIMER ME736494
003. [02] 09189-50320 CAM, TIMER ME736087
004. [02] 09189-50310 CAM, TIMER ME736088
004. [02] 09189-50330 CAM, TIMER ME736495
005. [04] 94907-10880 WASHER, SNAP ME703750
006. [01] 09185-00390 GEAR, DRIVE ME736089
007. [4C] 94901-39030 WASHER, PLATE, SK ME736090
007. [4C] 94901-39080 WASHER, PLATE, SK ME736095
007. [4C] 94901-39070 WASHER, PLATE, SK ME736094
007. [4C] 94901-39060 WASHER, PLATE, SK ME736093
007. [4C] 94901-39050 WASHER, PLATE, SK ME736092
007. [4C] 94901-39040 WASHER, PLATE, SK ME736091
010. [04] 09181-92630 SPRING, TIMER ME736096
012. [04] 09181-80740 SPRING, TIMER SUB ME736097
014. [02] 09188-40130 SUPPORT, TIMER SPR ME736098
015. [04] 09181-70440 SEAT ME736496
015. [04] 09181-70390 SEAT ME736099
016. [04] 09181-70400 SEAT ME736100
017. [01] 90557-45000 RING, SHAFT SNAP ME736101
018. [01] 90557-35000 RING, SHAFT SNAP ME703758
019. [01] 09185-60461 COVER, TIMER ME736102
020. [02] 09188-20070 ROLLER, TIMER ME736802
020. [02] 09188-20060 ROLLER, TIMER ME728402
021. [2C] 94901-38070 WASHER, PLATE, SK ME703767
021. [2C] 94901-38060 WASHER, PLATE, SK ME703766
021. [2C] 94901-38050 WASHER, PLATE, SK ME703765
021. [2C] 94901-38040 WASHER, PLATE, SK ME703764
021. [2C] 94901-38030 WASHER, PLATE, SK ME703763
021. [2C] 94901-38020 WASHER, PLATE, SK ME703762
022. [2C] 94901-39020 WASHER, PLATE, SK ME736108
022. [2C] 94901-39010 WASHER, PLATE, SK ME736107
022. [2C] 94901-39000 WASHER, PLATE, SK ME736106
022. [2C] 94901-38990 WASHER, PLATE, SK ME736105
022. [2C] 94901-38980 WASHER, PLATE, SK ME736104
022. [2C] 94901-38970 WASHER, PLATE, SK ME736103
023. [4C] 94901-39140 WASHER, PLATE, SK ME736109
023. [4C] 94901-39150 WASHER, PLATE, SK ME736110
023. [4C] 94901-39160 WASHER, PLATE, SK ME736111

Include in #3:

09180-03241 as TIMER ASSY, AUTOMA
09300-04433
09300-04583
09300-04622
09300-04632
09300-04772
09300-04782
09300-04871
09300-04881

Cross reference number



Part num Firm num Firm Name
09180-03241  ME728984  TIMER ASSY, AUTOMA




Information:

Introduction
This Special Instruction is intended for the installation of the 366-9748 Injector Wiring Harness Kit . The 366-9748 Injector Wiring Harness Kit can be used to repair TPI connectors. TPI connectors can be found on HEUI injectors, variable valve actuators, and Cat Brakes.Removal of the Connector From the Wire Harness
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9S-9150     Terminal Crimp Tool As     1    
B     9U-6070
or     Heat Gun Gp
(110V)     1    
9U-6072 Heat Gun Gp (220 V)    The following steps will remove the connector for an injector from the wire harness that is under the valve mechanism cover.
Illustration 1 g01035448
(1) Side "A" of the connector (2) Side "B" of the connectorNote: Side "A" or side "1" of the connector is the output signal wire from the ECM. Side"B" or side "2" of the connector is the sensor return.
Identify side "A" of the connector and identify side "B" of the connector.
Mark each wire on the wire harness before the wires are cut. Most connectors will have the label of an "A" and a "B". Some connectors may have a "1" and a "2" that is on the connector. The label with a "1" will be an "A". The label with a "2" will be a "B".
Illustration 2 g01034438
Connector that is cut from the wire harness (3) Wire on side "A" of the connector (4) Wire on side "B" of the connector
Cut wire (3) at a distance of 45 mm (1.8 inch).
Cut wire (4) at a distance of 40 mm (1.6 inch).
Illustration 3 g01034450
(5) Wire from the harness for side "B" on the connector (6) Wire from the harness for side "A" on the connectorNote: The wires on the old connector are cut to length so that the wires on the wire harness to the new connector will match up. The proper length will help in matching the harness wires to the wires on the new connector wires.
Discard the connector.Installation Procedure for the Connector
Use Tool (A) to strip the plastic off wires (5) and (6) at a distance of 5 mm (0.19 inch).
Illustration 4 g01034451
Connecting the connector to the wire harness (5) Wire from the harness for side "B" on the connector (6) Wire from the harness for side "A" on the connector (7) Heat shrink tube (8) Butt splice on wire (4) that is on side "B" of the connector (9) Butt splice on wire (3) that is on side "A" of the connector
Use the heat shrink tubes from 366-9748 Injector Wiring Harness Kit . Slide the heat shrink tubes toward the connector in order to expose the butt splices.
Take wire (5) and slide wire (5) in the butt splice (8).
Take wire (6) and slide wire (6) in the butt splice (9).
Illustration 5 g01035814
Illustration 6 g01034452
(8) Butt splice on wire (4) that is on side "B" of the connector (9) Butt splice on wire (3) that is on sid

Have questions with 09180-03241?





09180-03240 TIMER ASSY, AUTOMA 09180-03211 09180-03201 09180-03190 09180-03180
01800840 TIMER ASSY, AUTOMA 09180-00780 09180-00841 09180-00870 09180-00970

Group cross 09180-03241

Back to top