Information timer assy, automa
Rating:
KIT List:
| Timer assy, automa | 0918030030 |
| Timer assy, automa | 0918030030 |
Scheme ###:
| 000. | [01] | 09180-01410 | TIMER ASSY, AUTOMA | ME035808 |
| 001. | [01] | 09181-00841 | HUB ASSY, TIMER | |
| 002. | [01] | 09184-00700 | FLANGE, TIMER DRIV | |
| 003. | [02] | 09183-60241 | WEIGHT SUB-ASSY, T | |
| 004. | [01] | 09185-60340 | COVER, TIMER | ME702240 |
| 005. | [01] | 94915-01890 | SEAL, OIL | ME702250 |
| 006. | [02] | 94904-04471 | BOLT, HEXAGON | ME702248 |
| 007. | [02] | 09022-20080 | WASHER, FUEL PIPE | ME702235 |
| 008. | [04] | 09188-40040 | SUPPORT, TIMER SPR | ME702551 |
| 009. | [04] | 09181-91110 | SPRING, TIMER | |
| 010. | [4C] | 94901-38580 | WASHER, PLATE, SK | ME728171 |
| 010. | [4C] | 94901-38570 | WASHER, PLATE, SK | ME728170 |
| 010. | [4C] | 94901-38560 | WASHER, PLATE, SK | ME728169 |
| 011. | [02] | 09188-30020 | BUSHING, TIMER ROL | ME702242 |
| 012. | [02] | 09188-20020 | ROLLER, TIMER | ME702241 |
| 013. | [02] | 94901-17690 | WASHER, STEEL PLAT | ME702244 |
| 014. | [01] | 09188-50020 | SCREW, TIMER OIL S | ME702243 |
| 015. | [01] | 09083-90040 | PACKING | ME736036 |
| 016. | [01] | 94914-03650 | O-RING | ME702249 |
| 017. | [01] | 94901-81500 | WASHER, COPPER PLA | ME702247 |
| 018. | [02] | 94901-21450 | WASHER, CAP | ME702245 |
| 019. | [01] | 09031-70060 | PLUG, SCREW | ME702176 |
Include in #3:
09180-01410
as TIMER ASSY, AUTOMA
Cross reference number
| Part num | Firm num | Firm | Name |
| 09180-01410 | ME035808 | TIMER ASSY, AUTOMA | |
| ME035808 | MITSUBISHI | TIMER ASSY, AUTOMA |
Information:
(1) Clearance between ends of oil seal ring (when installed in bore) ... 0.05 to 0.25 mm (.002 to .010 in)(2) Apply 5P3931 Anti-Seize Compound to threads of bolts that hold turbine housing to turbocharger. Tighten to a torque of ... 15.8 0.5 N m (140 5 lb in)(3) Tighten bolts that hold compressor housing to turbocharger cartridge to a torque of ... 7.3 0.5 N m (65 5 lb in)(4) Compressor wheel installation: a. Install wheel on shaft.b. Put 1 drop of 7M7456 Bearing Mount on shaft threads.c. Tighten nut to a torque of ... 10.2 0.5 N m (90 5 lb in)(5) End play for shaft ... 0.051 to 0.083 mm (.0020 to .0033 in)(6) Apply 5P3931 Anti-Seize Compound. Tighten to a torque of ... 54 5 N m (40 4 lb ft)(7) Bore in housing for bearings ... 17.991 to 18.004 mm (.7083 to .7088 in) Outside diameter of the bearings ... 17.866 to 17.877 mm (.7034 to .7039 in)(8) Bore in the bearings ... 10.190 to 10.198 mm (.4012 to .4015 in) Diameter of shaft bearing surface ... 10.152 to 10.160 mm (.3997 to .4000 in)(9) Clearance between ends of oil seal ring (when installed in bore) ... 0.010 to 0.218 mm (.0004 to .0086 in)