Fuel injectors
  1. Home
  2. denso
  3. #09080-09571

09080-09571 GOVERNOR ASSY, MEC Denso Cross


 

Information governor assy, mec

09080-09571 GOVERNOR ASSY, MEC
Rating:
30
Buy GOVERNOR ASSY, MEC 09080-09571 genuine, new aftermarket engine parts with delivery

Scheme ###:

GOVERNOR ASSY, MEC
000. [01] 09080-09571 GOVERNOR ASSY, MEC
001. [01] 09081-00321 HOUSING SUB-ASSY,
001-001. [01] 94910-31540 BEARING, OILLESS
002. [01] 09102-00030 GUIDE SUB-ASSY, OI 09102-00030
003. [01] 09082-30320 GASKET
003. [01] 09082-30052 GASKET 09082-30052
004. [01] 94901-15270 WASHER, STEEL PLAT 94901-15270
005. [01] 09082-40010 SHAFT SUB-ASSY, GO 09082-40010
006. [01] 94901-10330 WASHER, STEEL PLAT 94901-10330
007. [01] 90170-10061 NUT, HEXAGON
008. [01] 94910-00801 BEARING, BALL 94910-00801
009. [04] 94901-33110 WASHER, PLATE, SK 94901-33110
010. [01] 09084-00070 FLYWEIGHT ASSY 09084-00070
011. [01] 90557-11000 RING, SHAFT SNAP
012. [01] 09086-00091 SLEEVE SUB-ASSY, F 09086-00091
012-001. [01] 94907-20590 RING, SNAP 94907-20591
012-002. [01] 94910-00801 BEARING, BALL 94910-00801
012-003. [01] 09085-90031 SLEEVE SUB-ASSY, G 09085-90031
017. [01] 09087-50034 SEAT SUB-ASSY, SPR 09087-50034
018. [01] 09099-20120 SPRING, SPEED CONT 09099-20120
019. [01] 09097-40010 GEAR ASSY 09097-40010
019. [01] 09097-40050 GEAR ASSY
019-001. [01] 09084-10290 BUSHING, CAMSHAFT
019-002. [01] 09097-80040 GEAR, GOVERNOR 09097-80040
019-003. [01] 09087-20020 DISC, SLIP
019-004. [02] 94901-32850 WASHER, PLATE, SK 94901-32850
019-005. [01] 90557-21000 RING, SHAFT SNAP 90557-21000
020. [01] 94901-50490 WASHER, SPRING 94901-50490
021. [01] 09084-40020 NUT, ROUND 09084-40020
022. [01] 09115-90010 ARM SUB-ASSY 09115-90010
024. [01] 09104-80140 LEVER SUB-ASSY, SU
025. [01] 09107-90100 SPRING, SAFETY
027. [01] 09107-80080 BOLT, CONNECTING
028. [01] 09140-30120 WASHER, LOCK
030. [01] 09105-60020 SHAFT ASSY, GOVERN
033. [01] 94915-01000 SEAL, OIL 94915-01000
034. [01] 09109-80390 STOPPER 09109-80390
035. [01] 94804-10041 BOLT, SLOTTED HEXA 80904-10041
040. [01] 09098-30053 PIN, CONNECTING 09098-30053
041. [01] 09097-50043 ARM, SPRING 09097-50043
042. [01] 09094-40060 BUSHING 09094-40060
043. [01] 09094-40051 BUSHING 09094-40051
044. [02] 09089-40020 E-RING 09089-40020
045. [01] 09098-10050 SHACKLE 09098-10050
046. [01] 09098-20060 PIN, SHACKLE 09098-20060
047. [01] 09140-30051 WASHER, LOCK 09140-30051
048. [01] 09143-00080 LEVER ASSY, FLOATI
049. [01] 09099-30070 SPRING, START 09099-30070
050. [01] 09115-90031 ARM SUB-ASSY 09115-90031
054. [01] 09082-10070 STOPPER 09082-10070
056. [01] 90801-10080 O-RING 90801-10080
057. [01] 09101-60151 BUSHING, BEARING 09101-60151
058. [ C] 94901-33760 WASHER, PLATE, SK 94901-33760
058. [ C] 94901-33780 WASHER, PLATE, SK
058. [ C] 94901-33790 WASHER, PLATE, SK 94901-33790
059. [01] 09082-10050 STOPPER 09082-10050
061. [01] 09109-00850 LEVER SUB-ASSY, ST
062. [01] 09104-20980 SPRING, RETURN
063. [02] 09024-10010 WASHER, AIR BLEEDE MM500486
064. [01] 94933-07300 TUBE, RUBBER
068. [01] 09106-90080 SHAFT 09106-90080
069. [01] 09118-10070 SCREW, STOP 09118-10070
070. [02] 94915-00710 SEAL, OIL 94915-00710
071. [02] 94901-13570 WASHER, STEEL PLAT 94901-13570
072. [02] 90577-10001 E-RING
073. [01] 09101-00640 COVER SUB-ASSY, GO 09101-00640
075. [01] 94904-10790 BOLT, SLOTTED HEXA 94904-10790
076. [05] 91418-06251 BOLT, W/WASHER 91418-06251
077. [02] 94904-70930 BOLT, W/WASHER 94904-70930
079. [02] 94805-30051 NUT, HEXAGON, W/HO 94805-30051
080. [02] 94904-50050 BOLT, HEXAGON, W/ 94904-50050
081. [02] 09634-20010 NUT, LOCK 09634-20010
082. [01] 09107-10720 LEVER, ADJUSTING
084. [01] 09116-70031 PLUG, SCREW 09116-70031
085. [01] 09022-20060 WASHER, FUEL PIPE 09022-20060
090. [01] 09116-60040 SCREW, STOP 09116-60040
091. [01] 09101-60091 BUSHING, BEARING 09101-60091
092. [01] 94913-00010 KEY, WOODRUFF 94913-00010
093. [01] 09082-30280 GASKET
093. [01] 09082-30460 GASKET
094. [01] 09022-40081 SCREW,PLUG MM500485
095. [01] 94901-80350 WASHER, COPPER PLA 94901-80350
107. [01] 09091-90080 ADAPTER 09091-90080
108. [01] 09006-30070 SPRING, IDLE 09006-30070
109. [01] 09091-50010 CAPSULE, ADAPTER
110. [01] 94905-30150 NUT, HEXAGON, W/ H 94905-30150
111. [01] 90801-10030 O-RING
112. [01] 09103-10030 NUT, CAP 09103-10030

Include in #3:

09080-09571 as GOVERNOR ASSY, MEC

Cross reference number



Part num Firm num Firm Name
09080-09571    GOVERNOR ASSY, MEC




Information:


Before any service work is to be done on this fuel system, the outer surface of the injection pump housing must be clean.
The fuel injection pump housing and governor has been removed from the engine for illustration purposes. 1. Remove the flange (1) and the flange assembly from the cover.2. Remove the cover (2) from the pump housing. 3. Remove the bypass valve (3) and springs from the pump housing. 4. Install tooling (A) on the fuel injection pump and loosen the bushing from the pump housing. Do not loosen the screws (4) that hold the levers to the shaft when removing or installing pumps. If the levers are moved, fuel pump calibration will be changed. 5. Remove the fuel injection pump (5) from the pump housing. The sleeve (6) on the plunger will slide off the lever as the pump is removed.6. Do Steps 4 and 5 for the remainder of the pumps.Install Fuel Injection Pumps
1. Turn the camshaft until the lifter for the pump to be installed is at its lowest position. 2. Install the fuel injection pump (1) in the bore of the pump housing.3. The sleeve (2) will be engaged with the lever when the pump is installed correctly.
If the levers have been moved on the shaft, fuel pump calibration must be made. (See Testing and Adjusting).
4. Tighten the bushing with tooling (A) to a torque of 70 5 lb.ft. (9.7 0.7 mkg).5. Do Steps 1 through 4 for the remainder of the pumps. 6. Install the bypass valve and spring (3) in the pump housing. 7. Install the cover (5) on the pump housing. Be sure the spring (3) is in the bore in the cover.8. Install the flange (4) and the flange assembly on the cover.Disassemble Fuel Injection Pumps
start by: a) remove fuel injection pumps 1. Remove the bushing (1) and seal from the bonnet (2).2. Remove the ring (3) from the bonnet and barrel (7). Remove the check valve (6) and spring (4) from the bonnet.3. Remove the spring (8) and washer (5). Remove the plunger (9) and sleeve (10). Keep the plunger and sleeve with their respective barrel for installation. Do not use plungers, sleeves and barrels with other plungers, sleeves and barrels.Assemble Fuel Injection Pumps
1. Install the sleeve (4), plunger (5), spring (2) and washer (3) on the barrel (1). Be sure the sleeve and plunger are installed in their original barrel and the large hole in the plunger is up. The sleeve must be installed with the thin flange up.2. Install the check valve and spring in the bonnet. Connect the barrel and bonnet and install the ring. Install the seal and bushing on the bonnet.end by: a) install fuel injection pumps

Have questions with 09080-09571?





19080-02390 GOVERNOR ASSY, MEC 09130-00302 09130-00292 09130-00281 09130-00275
04250-70102 GOVERNOR ASSY, MEC 04250-70122 04250-70142 04250-70152 04250-70533

Group cross 09080-09571

Back to top