Information governor assy, mec

Rating:
Scheme ###:
000. | [01] | 09080-04372 | GOVERNOR ASSY, MEC | 22330-1020 |
003. | [01] | 09081-10270 | HOUSING, GOVERNOR | |
005. | [01] | 09081-30010 | PIN | 6 056 1319 40 |
007. | [01] | 09082-10080 | STOPPER | 22395-1590A |
008. | [02] | 94905-30051 | NUT, HEXAGON, W/ H | 22821-1540A |
010. | [01] | 09116-70050 | PLUG, SCREW | 22845-1030A |
011. | [01] | 09022-20060 | WASHER, FUEL PIPE | 6 366 1331 10 |
012. | [01] | 09116-70031 | PLUG, SCREW | 22845-1320A |
013. | [01] | 09084-00040 | FLYWEIGHT ASSY | 22344-1030 |
014. | [01] | 94913-00050 | KEY, WOODRUFF | 22891-1040A |
015. | [01] | 94901-50500 | WASHER, SPRING | 22877-1540A |
016. | [01] | 09084-40010 | NUT, ROUND | 22353-1070A |
017. | [01] | 09086-10160 | SLEEVE, GOVERNOR | 22305-1170A |
018. | [01] | 94910-00010 | BEARING, BALL | 22837-1120A |
019. | [1C] | 94901-34060 | WASHER, PLATE, SK | 22885-5120A |
019. | [1C] | 94901-34070 | WASHER, PLATE, SK | 22885-5130A |
019. | [1C] | 94901-34080 | WASHER, PLATE, SK | 22885-5140A |
019. | [1C] | 94901-34090 | WASHER, PLATE, SK | 22885-5150A |
019. | [1C] | 94901-34100 | WASHER, PLATE, SK | 22885-5160A |
020. | [01] | 09082-30022 | GASKET | |
021. | [01] | 09101-00561 | COVER SUB-ASSY, GO | 22381-1060 |
022. | [01] | 09101-60360 | BUSHING, BEARING | 22322-2570 |
023. | [01] | 09088-00020 | LEVER ASSY, SWIEVE | |
024. | [01] | 09089-20011 | BUSHING, LEVER | 22322-1440A |
025. | [01] | 09089-20021 | BUSHING, LEVER | 22322-1550 |
026. | [02] | 94914-00080 | O-RING | 22817-1190A |
027. | [02] | 94907-10090 | WASHER, SNAP | 22887-1050A |
028. | [01] | 94915-00210 | SEAL, OIL | 22827-1370A |
029. | [01] | 09093-00041 | LEVER ASSY, CONTRO | 6 056 1325 80 |
030. | [01] | 09097-00010 | SHACKLE ASSY | 6 056 1325 90 |
031. | [01] | 90400-02101 | PIN, SPLIT | 22863-1820A |
031. | [01] | 90400-02120 | PIN, SPLIT | 6 056 1303 30 |
032. | [01] | 94901-80350 | WASHER, COPPER PLA | 22847-1950A |
033. | [01] | 09022-40081 | SCREW,PLUG | |
034. | [01] | 09090-10170 | LEVER, TENSION | 22308-1060A |
035. | [01] | 09100-60030 | SCREW, STROKE ADJU | 22395-1270 |
036. | [01] | 94905-01020 | NUT, HEXAGON | 22825-2050A |
037. | [03] | 94901-81020 | WASHER, COPPER PLA | 22867-1500A |
038. | [01] | 09103-10020 | NUT, CAP | 22342-1300A |
039. | [01] | 09098-90010 | SHAFT, LEVER SUPPO | 22318-1240A |
040. | [02] | 09099-10010 | PLUG, SCREW | 22845-1210A |
041. | [01] | 09099-20480 | SPRING, SPEED CONT | 22321-2390A |
042. | [01] | 09099-30010 | SPRING, START | 22331-1280A |
043. | [01] | 09091-00680 | ADAPTER ASSY | 22404-1700A |
043-001. | [01] | 09091-90010 | ADAPTER | 22385-2190A |
043-002. | [01] | 09091-80140 | SPRING, MECHANICAL | 22411-2110A |
043-003. | [ C] | 94901-37880 | WASHER, PLATE, SK | 22885-6810A |
043-003. | [ C] | 94901-34030 | WASHER, PLATE, SK | 22885-5550A |
043-003. | [ C] | 94901-34020 | WASHER, PLATE, SK | 22885-5540A |
043-003. | [ C] | 94901-33880 | WASHER, PLATE, SK | 22885-5530A |
043-004. | [01] | 09091-10010 | SCREW, ADPTER | 22385-2060A |
043-005. | [01] | 09089-40010 | E-RING | 22863-1810A |
044. | [01] | 09092-30011 | NUT, ADAPTER LOCK | 22825-2090A |
045. | [01] | 09091-00550 | ADAPTER ASSY | |
045-001. | [01] | 09091-10100 | SCREW, ADPTER | |
045-002. | [01] | 09091-80950 | SPRING, MECHANICAL | |
045-003. | [01] | 09091-90150 | ADAPTER | 22385-1140A |
045-004. | [01] | 09089-40010 | E-RING | 22863-1810A |
047. | [01] | 94905-02460 | NUT, HEXAGON | 22825-1240A |
048. | [01] | 09024-10010 | WASHER, AIR BLEEDE | 22847-2150A |
049. | [01] | 09103-10030 | NUT, CAP | 22825-2060A |
050. | [01] | 09105-10380 | PLATE, COVER | |
051. | [01] | 09105-70022 | GASKET, COVER PLAT | |
052. | [02] | 94904-72701 | BOLT, W/WASHER | 22815-2030A |
054. | [06] | 90258-06001 | WASHER, SPRING | 28219-1110A |
056. | [06] | 94904-01030 | BOLT, HEXAGON | 22861-1240 |
058. | [01] | 09082-10010 | STOPPER | 22395-1290A |
059. | [01] | 94913-00030 | KEY, WOODRUFF | 22891-1060A |
060. | [01] | 94904-71190 | BOLT, W/WASHER | 22815-1230A |
062. | [01] | 09107-00350 | LEVER SUB-ASSY, AD | 22309-1070A |
063. | [01] | 09109-40010 | CAP, LEVER | 22855-1060A |
064. | [01] | 09109-00020 | LEVER SUB-ASSY, ST | 6 076 1323 20 |
065. | [01] | 91410-06141 | BOLT, W/WASHER | 22815-2290A |
067. | [01] | 09103-40010 | LEVER, SUPPORT | 6 056 1322 70 |
068. | [01] | 09103-50020 | SHAFT, MECHANICAL | 6 056 1322 10 |
069. | [01] | 09103-60010 | CUP, SPRING | 22358-1490A |
070. | [01] | 09103-80010 | SPRING, B | 98731-0102 |
071. | [01] | 09103-70010 | SPRING, A | 6 056 1322 30 |
072. | [01] | 09103-90010 | SEAT, SPRING | 6 056 1322 20 |
073. | [01] | 94903-60560 | RIVET, FLAT | |
074. | [01] | 09104-20030 | SPRING, RETURN | 22341-2500A |
075. | [01] | 94914-00130 | O-RING | 22817-1440A |
076. | [01] | 09104-30010 | COVER, SPRING | 22351-1650A |
Include in #3:
09080-04372
as GOVERNOR ASSY, MEC
Cross reference number
Part num | Firm num | Firm | Name |
09080-04372 | 22330-1020 | GOVERNOR ASSY, MEC |
Information:
Introduction
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
In order to extend the life of fuel injectors on the above listed engines, the injector solenoids need to remain cool.Solution
Illustration 1 g01404067
Hole in exhaust rocker arm for oil sprayThe system was developed in order to provide a stream of engine oil to the injector solenoids. The design uses the existing oil supply from the valve mechanism. The oil spray is directed out of the exhaust rocker arms. There is one 0.7 mm (0.028 inch) hole (1) in each exhaust rocker arm.Note: When you are servicing the valve mechanism, the oil ports must remain free of debris.
Illustration 2 g01404069
(2) Location of oil spray
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
In order to extend the life of fuel injectors on the above listed engines, the injector solenoids need to remain cool.Solution
Illustration 1 g01404067
Hole in exhaust rocker arm for oil sprayThe system was developed in order to provide a stream of engine oil to the injector solenoids. The design uses the existing oil supply from the valve mechanism. The oil spray is directed out of the exhaust rocker arms. There is one 0.7 mm (0.028 inch) hole (1) in each exhaust rocker arm.Note: When you are servicing the valve mechanism, the oil ports must remain free of debris.
Illustration 2 g01404069
(2) Location of oil spray