09043-80300 SHIM, ELEMENT HOLD Denso Cross


 

Information shim, element hold

09043-80300 SHIM, ELEMENT HOLD
Rating:
43
Buy SHIM, ELEMENT HOLD 09043-80300 genuine, new aftermarket engine parts with delivery

Include in #3:

Number on scheme 016
SHIM, ELEMENT HOLD
09010-04491 as SHIM, ELEMENT HOLD

Cross reference number



Part num Firm num Firm Name
09043-80300  22885-2210  SHIM, ELEMENT HOLD
22885-2210A    HINO SHIM, ELEMENT HOLD




Information:

Introduction
The problem that is identified below has a known solution. Use the solution that is identified below.Problem
The procedure for the Disassembly and Assembly needs to be updated to include the information below.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Inspect the quill tubes and fuel injectors for cuts or marks at the mating surfaces.
Replace any quill tubes since the quill tubes are a one time use component. Replace the copper washer when replacing the fuel injector.
Follow the steps below for installing the quill tunes and fuel injectors.
Seat the injector by installing and torquing the injector hold down clamp bolt to 30 3 N m (22 2 lb ft).
Install the quill tube and tighten the quill nut between 15 N m (11 lb ft) to 20 N m (15 lb ft).
Apply a final torque of 30 3 N m (22 2 lb ft) to the injector hold down clamp bolt.
Apply a final torque between 50 N m (37 lb ft) to 55 N m (41 lb ft).

Have questions with 09043-80300?





Group cross 09043-80300

Back to top