09024-40140 SCREW, AIR BLEEDER Denso Cross


 

Information screw, air bleeder

09024-40140 SCREW, AIR BLEEDER
Rating:
34
Buy SCREW, AIR BLEEDER 09024-40140 genuine, new aftermarket engine parts with delivery

Include in #3:

Number on scheme 025
SCREW, AIR BLEEDER
09450-01240 as SCREW, AIR BLEEDER

Cross reference number



Part num Firm num Firm Name
09024-40140    SCREW, AIR BLEEDER




Information:


DO NOT adjust the linkage so the treadle can be used to shut off the engine. If the operator is in a standing position and places a foot on the treadle, the engine could be unexpectedly shut off, creating a situation where the machine can be difficult to control.
814B, 815B, 816B, 966D
1. Set governor shaft to the off position (approximately 35° right of twelve o'clock) and attach lever (1).2. Adjust cable assembly (2) to within 3 mm (.12 in) of the end of travel and tighten bulkhead (3) nuts to ... 100 15 N m (75 11 lb ft)3. With pedal (4) in off position (approximately 66 3° up from floor plate) attach cable assembly (2) to lever (6).4. Tighten bulkhead nuts at pedal end of cable assembly to ... 100 15 N m (75 11 lb ft)5. Set governor lever (1) to high idle and adjust bolt (5) until it contacts pedal.528
1. Move governor shaft (3) to Shutoff position and install lever (2) on shaft (3) at angle shown.2. Position pedal assembly (1) to dimension A above stop (4) by adjusting rod assembly (5). Dimension A ... 49 1 mm (1.93 .04 in)3. Tighten nut (6) to a torque of ... 45 7 N m (33 5 lb ft)

Have questions with 09024-40140?





Group cross 09024-40140

Back to top