Fuel injectors
  1. Home
  2. denso
  3. #09010-07602

09010-07602 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-07602 BODY ASSY, INJECTI
Rating:
59
Buy BODY ASSY, INJECTI 09010-07602 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-07602 BODY ASSY, INJECTI
001. [01] 09011-03811 HOUSING SUB-ASSY, 22101-2210A
001. [01] 09011-05480 HOUSING SUB-ASSY,
001-001. [03] 94904-30010 BOLT, STUD 22857-1060A
002. [06] 09013-00161 HOLDER SUB-ASSY, D 22108-1140A
003. [06] 09013-60550 SPRING, DELIVERY V 22125-1110A
004. [06] 94914-02570 O-RING 22817-1260A
005. [06] 09014-01210 VALVE SUB-ASSY, IN 22103-1590A
006. [06] 09015-02704 ELEMENT SUB-ASSY, 22104-1640A
006. [06] 09015-06090 ELEMENT SUB-ASSY,
007. [06] 09016-00060 SLEEVE SUB-ASSY, C 22118-1210A
008. [01] 09021-20630 RACK, CONTROL 22113-1490A
009. [06] 09016-30160 SEAT, SPRING, UPR
009. [06] 09016-30131 SEAT, SPRING, UPR 22119-1061A
010. [06] 09016-40211 SPRING, PUMP PLUNG
010. [06] 09016-40250 SPRING, PUMP PLUNG 22121-1110A
011. [06] 09016-50150 SEAT, SPRING, LWR 22122-1100A
012. [06] 09017-00230 TAPPET SUB-ASSY,IN 22145-1030A
012. [06] 09017-00320 TAPPET SUB-ASSY,IN 22105-1480A
013. [ C] 09043-80471 SHIM, ELEMENT HOLD 22885-7910A
013. [ C] 09043-80481 SHIM, ELEMENT HOLD 22885-7920A
013. [ C] 09043-80491 SHIM, ELEMENT HOLD 22885-5610A
013. [ C] 09043-80501 SHIM, ELEMENT HOLD 22885-5620A
013. [ C] 09043-80511 SHIM, ELEMENT HOLD 22885-5630A
013. [ C] 09043-80521 SHIM, ELEMENT HOLD 22885-5820A
013. [ C] 09043-80461 SHIM, ELEMENT HOLD 22885-5580A
013. [ C] 09043-80451 SHIM, ELEMENT HOLD 22885-5570A
013. [ C] 09043-80391 SHIM, ELEMENT HOLD 22885-2300A
013. [ C] 09043-80401 SHIM, ELEMENT HOLD 22885-2310A
013. [ C] 09043-80411 SHIM, ELEMENT HOLD 22885-2320A
013. [ C] 09043-80421 SHIM, ELEMENT HOLD 22885-2330A
013. [ C] 09043-80431 SHIM, ELEMENT HOLD 22885-2340A
013. [ C] 09043-80441 SHIM, ELEMENT HOLD 22885-5560A
014. [12] 90196-08651 NUT, HEXAGON 22825-1380A
015. [12] 94901-35880 WASHER, PLATE, SK 22885-2290A
016. [12] 90258-08001 WASHER, SPRING 22877-1720A
017. [01] 94914-03940 O-RING 22817-1470A
017. [01] 94914-00970 O-RING 22813-1270A
018. [18] 09013-90020 O-RING 22817-1270A
018. [12] 09013-90340 O-RING 22817-2280A
019. [06] 94901-81730 WASHER, COPPER PLA 22847-1550A
020. [01] 09019-10651 CAMSHAFT, INJECTIO 22123-1350A
021. [01] 94910-10140 BEARING, ROLLER 22837-1180A
022. [01] 09019-30050 RING, CAMSHAFT ADJ 22124-1090A
023. [3C] 09019-40410 PLATE, CAMSHAFT SH 22885-6670A
023. [3C] 09019-40360 PLATE, CAMSHAFT SH 22885-5700A
023. [3C] 09019-40350 PLATE, CAMSHAFT SH 22885-5690A
023. [3C] 09019-40340 PLATE, CAMSHAFT SH 22885-5680A
023. [3C] 09019-40100 PLATE, CAMSHAFT SH 22885-1580A
023. [3C] 09019-40090 PLATE, CAMSHAFT SH 22885-1570A
023. [3C] 09019-40080 PLATE, CAMSHAFT SH 22885-1560A
023. [3C] 09019-40070 PLATE, CAMSHAFT SH 22885-1550A
024. [6C] 94901-35050 WASHER, PLATE, SK 22885-1460A
024. [6C] 94901-35030 WASHER, PLATE, SK 22885-1450A
024. [6C] 94901-35020 WASHER, PLATE, SK 22885-1440A
024. [6C] 94901-32310 WASHER, PLATE, SK 22885-2280A
025. [01] 94915-01420 SEAL, OIL 22827-1020A
025. [01] 94915-02820 SEAL, OIL 22827-1750A
026. [01] 09020-10430 COVER, BEARING 22111-1320A
027. [04] 91518-06161 BOLT, W/WASHER 22815-1310A
028. [01] 09043-30020 RETAINER, BEARING 22111-1310A
029. [01] 09036-10100 BEARING, CENTER 22837-1190A
030. [02] 90015-06181 SCREW, SLOTTED OVA 22865-1010A
030. [02] 94900-66510 SCREW
030. [02] 94900-67300 SCREW
031. [02] 09024-80010 WASHER, DRAIN SCRE 22847-1730A
032. [01] 09021-50060 SCREW, RACK GUIDE 22811-4850A
032. [01] 09021-50011 SCREW, RACK GUIDE 22811-1980A
033. [01] 09031-70140 PLUG, SCREW 22845-1280A
034. [01] 09019-30060 RING, CAMSHAFT ADJ 22124-1100A
035. [1C] 09011-80350 NEEDLE, TIMING
035. [1C] 09011-80340 NEEDLE, TIMING
035. [01] 09011-80330 NEEDLE, TIMING
035. [1C] 09011-80330 NEEDLE, TIMING
036. [03] 94901-02490 WASHER 22877-1100A
038. [01] 09024-50190 SCREW, HOLLOW 22835-1140A
039. [01] 94918-00420 SCREW, HOLLOW 22835-1180A
041. [02] 94901-02470 WASHER 22847-1900A
043. [01] 94918-00060 SCREW, HOLLOW 22835-1110A
044. [02] 94901-02500 WASHER 22847-1920A
047. [01] 94914-00380 O-RING 22817-1540A
048. [03] 90160-06051 NUT, HEXAGON 22825-1480A
049. [03] 90258-06001 WASHER, SPRING 28219-1110A
051. [01] 94910-10130 BEARING, ROLLER 22837-1050A
052. [3C] 09019-40420 PLATE, CAMSHAFT SH
052. [3C] 09019-40390 PLATE, CAMSHAFT SH 22129-1300A
052. [3C] 09019-40380 PLATE, CAMSHAFT SH 22129-1290A
052. [3C] 09019-40370 PLATE, CAMSHAFT SH 22129-1280A
052. [3C] 09019-40330 PLATE, CAMSHAFT SH 22129-1240A
052. [3C] 09019-40320 PLATE, CAMSHAFT SH 22129-1230A
052. [3C] 09019-40310 PLATE, CAMSHAFT SH 22129-1220A
052. [3C] 09019-40300 PLATE, CAMSHAFT SH 22129-1210A
053. [02] 94904-70620 BOLT, W/WASHER 22815-1620A
054. [02] 09011-40110 BUSHING, CONTROL R 22131-1200A
055. [01] 09036-70040 BUSHING, CONTROL R 22131-1190A
056. [02] 09020-80320 PLATE, SHIM
059. [01] 94901-80350 WASHER, COPPER PLA 22847-1950A

Include in #3:

09010-07602 as BODY ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09010-07602    BODY ASSY, INJECTI




Information:

1. Disconnect fuel line (1) from the fuel transfer pump. Disconnect fuel line (2) from the fuel injection pump housing. Remove line (3) from the fuel ratio control and aftercooler housing. 2. Disconnect fuel injection lines (4) from the fuel injection pump housing.
Do not disconnect the air line from the air compressor governor until the air pressure is zero.
3. Loosen the bleed valves, and release the air pressure in the air tank. 4. Remove air line (5). Remove coolant line (6). 5. The weight of the fuel injection pump housing and governor is 57 kg (125 lb.). Attach a hoist to the fuel injection pump housing, and remove bolts (7). 6. Remove the two nuts and two bolts (8) and bolt (9). Remove fuel injection pump housing and governor (10). 7. Remove O-ring seals (11) from the fuel injection pump housing.Install Fuel Injection Pump Housing And Governor
1. Attach a hoist to the fuel injection pump housing and governor (1). Be sure that the three O-ring seals are in position in the fuel injection pump housing. Install the fuel injection pump housing and governor on the timing gear housing. 2. Connect air line (2) and water line (3) to the air compressor. 3. Connect fuel injection lines (4) to fuel injection pump housing, and tighten the fuel injection line nuts to a torque of 40 7 N m (30 5 lb.ft.) with tool (C). 4. Connect fuel line (5) to fuel injection pump housing, and connect fuel line (6) to the fuel transfer pump. Install line (7) between the fuel ratio control and aftercooler housing. For timing of the fuel injection pump, see Install Automatic Timing Advance.END BY:a. install automatic timing advance

Have questions with 09010-07602?





09016-90180 BODY, INJECTION PU 09016-90130 09016-90120 09016-90110 09016-90100
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-07602

Back to top