Fuel injectors
  1. Home
  2. denso
  3. #09010-07530

09010-07530 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-07530 BODY ASSY, INJECTI
Rating:
15
Buy BODY ASSY, INJECTI 09010-07530 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-07530 BODY ASSY, INJECTI
001. [01] 09011-02730 HOUSING SUB-ASSY,
001-001. [03] 94904-30010 BOLT, STUD
002. [06] 09013-00180 HOLDER SUB-ASSY, D
003. [06] 94914-02710 O-RING
004. [06] 09013-60350 SPRING, DELIVERY V
006. [06] 09014-01270 VALVE SUB-ASSY, IN
007. [06] 94901-81451 WASHER, COPPER PLA
008. [06] 09015-01690 ELEMENT SUB-ASSY,
009. [06] 09042-00030 HOLDER ASSY, ELMEN
009-001. [06] 09044-80010 DISTANCE RING
010. [06] 94901-34340 WASHER, PLATE, SK
011. [06] 09043-60030 COVER, ELEMENT
012. [06] 94907-20780 RING, SNAP
013. [12] 94914-01120 O-RING
013. [12] 09013-90170 O-RING
014. [06] 94914-00991 O-RING
016. [ C] 09043-80170 SHIM, ELEMENT HOLD
016. [ C] 09043-80180 SHIM, ELEMENT HOLD
016. [ C] 09043-80190 SHIM, ELEMENT HOLD
016. [ C] 09043-80200 SHIM, ELEMENT HOLD
016. [ C] 09043-80210 SHIM, ELEMENT HOLD
016. [ C] 09043-80220 SHIM, ELEMENT HOLD
016. [ C] 09043-80230 SHIM, ELEMENT HOLD
016. [ C] 09043-80160 SHIM, ELEMENT HOLD
016. [ C] 09043-80150 SHIM, ELEMENT HOLD
016. [ C] 09043-80080 SHIM, ELEMENT HOLD
016. [ C] 09043-80090 SHIM, ELEMENT HOLD
016. [ C] 09043-80100 SHIM, ELEMENT HOLD
016. [ C] 09043-80110 SHIM, ELEMENT HOLD
016. [ C] 09043-80120 SHIM, ELEMENT HOLD
016. [ C] 09043-80130 SHIM, ELEMENT HOLD
016. [ C] 09043-80140 SHIM, ELEMENT HOLD
017. [12] 94901-17040 WASHER, STEEL PLAT
018. [12] 90258-10001 WASHER, SPRING
019. [12] 90160-10081 NUT, HEXAGON
020. [01] 09021-20340 RACK, CONTROL
021. [02] 09011-40060 BUSHING, CONTROL R
022. [01] 94908-20290 PIN, STRAIGHT
023. [01] 09036-70010 BUSHING, CONTROL R
024. [06] 09016-00020 SLEEVE SUB-ASSY, C
024. [06] 09016-00130 SLEEVE SUB-ASSY, C
025. [06] 09016-30060 SEAT, SPRING, UPR
026. [06] 09016-40130 SPRING, PUMP PLUNG
027. [06] 09016-50041 SEAT, SPRING, LWR
028. [06] 09017-00110 TAPPET SUB-ASSY,IN
028-001. [06] 09017-10131 TAPPET, INJECTION
028-002. [06] 09018-10170 ROLLER, INJECTION
028-003. [06] 09017-80060 BUSHING, INJECTION
028-004. [06] 09017-60080 PIN, INJECTION PUM
028-005. [06] 09017-50040 SLIDER
029. [01] 09019-10540 CAMSHAFT, INJECTIO
030. [01] 09036-10110 BEARING, CENTER
031. [07] 90258-06001 WASHER, SPRING
032. [06] 90015-06181 SCREW, SLOTTED OVA
033. [02] 94910-10130 BEARING, ROLLER
034. [01] 09020-10400 COVER, BEARING
035. [01] 94915-02820 SEAL, OIL
035. [01] 94915-01420 SEAL, OIL
036. [01] 94914-03940 O-RING
037. [2C] 09020-80140 PLATE, SHIM
037. [2C] 09020-80130 PLATE, SHIM
037. [2C] 09020-80120 PLATE, SHIM
037. [2C] 09020-80110 PLATE, SHIM
037. [2C] 09020-80100 PLATE, SHIM
037. [2C] 09020-80090 PLATE, SHIM
037. [2C] 09020-80080 PLATE, SHIM
038. [01] 09043-30010 RETAINER, BEARING
039. [01] 94914-02720 O-RING
040. [03] 90160-06051 NUT, HEXAGON
041. [01] 09031-70070 PLUG, SCREW
042. [06] 09031-70060 PLUG, SCREW
043. [01] 09027-10340 PLATE, INJECTION P
043. [01] 09027-10380 PLATE, INJECTION P
044. [12] 90045-06121 SCREW, SLOTTED POL
045. [01] 09043-10031 COVER, DELIVERY VA
046. [02] 90060-06351 SCREW, CROSSRECESS
047. [02] 09140-30110 WASHER, LOCK
048. [01] 09027-20260 GASKET, INJECTION
048. [01] 09027-20140 GASKET, INJECTION
049. [02] 94901-80550 WASHER, COPPER PLA
050. [01] 09022-40021 SCREW,PLUG
051. [01] 09031-00160 VALVE ASSY, OVERFL
052. [02] 90200-06241 WASHER, PLATE
054. [01] 09010-80010 NEEDLE SUB-ASSY, T
055. [01] 94901-80710 WASHER, COPPER PLA
056. [06] 94901-81500 WASHER, COPPER PLA
057. [02] 90107-06101 BOLT, HEXAGON
058. [04] 94901-50740 WASHER, SPRING
061. [01] 94914-00380 O-RING

Include in #3:

09010-07530 as BODY ASSY, INJECTI
19100-03900

Cross reference number



Part num Firm num Firm Name
09010-07530    BODY ASSY, INJECTI




Information:

START BY:a. remove valve coversb. remove fuel injection lines 1. Use tool (A) and a 5P328 crowfoot wrench (7/8") to loosen the fuel injection line nut at the nozzle end.
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
2. Use tool (B) to loosen the nut at the fuel injection line adapter end. Remove inner fuel injection lines (1). Install plugs in the fuel injection nozzles. 3. Remove the nut that holds the adapters to the cylinder head assembly. Remove fuel injection line adapters (2).Install Fuel Injection Line Adapters
1. Check the condition of O-ring seal (1) on fuel injection line adapter (2) for damage. Make a replacement if necessary.2. Lubricate O-ring seal (1) with clean engine oil. Install fuel injection line adapter (2). Tighten the retaining nut to a torque of 13.6 2.7 N m (10 2 lb.ft.). 3. Check the condition of the O-ring seal on inner fuel line (3) for damage, and make a replacement if necessary. Install inner fuel line (3).
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
4. Use tooling (A) to tighten the inner fuel line nuts to a torque of 40 7 N m (30 5 lb.ft.).END BY:a. install fuel injection linesb. install valve covers

Have questions with 09010-07530?





09016-90180 BODY, INJECTION PU 09016-90130 09016-90120 09016-90110 09016-90100
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-07530

Back to top