Fuel injectors
  1. Home
  2. denso
  3. #09010-07480

09010-07480 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-07480 BODY ASSY, INJECTI
Rating:
6
Buy BODY ASSY, INJECTI 09010-07480 genuine, new aftermarket engine parts with delivery

KIT List:

Body assy, injecti No Application
Body assy, injecti No Application

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-07480 BODY ASSY, INJECTI
001. [01] 19011-04050 HOUSING KIT, INJEC
001-001. [01] 94904-30010 BOLT, STUD 21703290
003. [03] 09013-10320 HOLDER, DELIVERY V 21706510
004. [03] 09013-30180 STOPPER, DELIVERY
005. [03] 09013-60120 SPRING, DELIVERY V 21702860
006. [03] 09013-70100 GASKET, DELIVERY V 21706520
007. [03] 09014-01280 VALVE SUB-ASSY, IN 21707900
008. [03] 09015-03000 ELEMENT SUB-ASSY, 21709370
009. [03] 09015-60010 PINION, PLUNGER CO 21703220
010. [03] 09015-70010 SCREW, PLUNGER CON 21700130
011. [03] 09016-10330 SLEEVE, PLUNGER CO
012. [03] 09016-30010 SEAT, SPRING, UPR 21700150
012. [03] 09016-30191 SEAT, SPRING, UPR
013. [03] 09016-40090 SPRING, PUMP PLUNG
014. [03] 09016-50160 SEAT, SPRING, LWR
015. [03] 09017-00070 TAPPET SUB-ASSY,IN
016. [03] 09018-90090 PLUG, INJECTION PU
017. [01] 09019-11150 CAMSHAFT, INJECTIO
018. [01] 09019-30020 RING, CAMSHAFT ADJ 21703120
019. [3C] 09019-40010 PLATE, CAMSHAFT SH 21703070
019. [3C] 09019-40020 PLATE, CAMSHAFT SH 21703080
019. [3C] 09019-40030 PLATE, CAMSHAFT SH 21703090
019. [3C] 09019-40040 PLATE, CAMSHAFT SH 21701050
019. [3C] 09019-40050 PLATE, CAMSHAFT SH 21703240
019. [3C] 09019-40060 PLATE, CAMSHAFT SH 21703100
019. [3C] 09019-40110 PLATE, CAMSHAFT SH
020. [01] 09020-10540 COVER, BEARING
021. [01] 09020-60020 GASKET, BEARING CO
021. [01] 09020-60150 GASKET, BEARING CO
022. [01] 09021-20190 RACK, CONTROL 21703020
023. [01] 09021-50011 SCREW, RACK GUIDE 21700230
023. [01] 09021-50060 SCREW, RACK GUIDE
024. [01] 09019-30050 RING, CAMSHAFT ADJ
025. [01] 09023-00060 PLATE SET, VALVE H
026. [03] 94914-02570 O-RING 21706620
027. [02] 09025-10010 WASHER, INJECTION 21703050
028. [01] 09027-01250 COVER SUB-ASSY, IN
028. [01] 09027-01150 COVER SUB-ASSY, IN
028-001. [01] 09027-50133 PROCESSING DRAWING
028-002. [01] 09027-20200 GASKET, INJECTION
028-003. [02] 09024-30030 PACKING, AIR BLEED 21703310
028-004. [02] 09027-60030 SCREW
029. [3C] 09031-10100 PLATE, TAPPET ADJU
029. [3C] 09031-10110 PLATE, TAPPET ADJU
029. [3C] 09031-10120 PLATE, TAPPET ADJU
029. [3C] 09031-10130 PLATE, TAPPET ADJU
029. [3C] 09031-10140 PLATE, TAPPET ADJU
029. [3C] 09031-10150 PLATE, TAPPET ADJU
029. [3C] 09031-10090 PLATE, TAPPET ADJU
029. [3C] 09031-10080 PLATE, TAPPET ADJU
029. [3C] 09031-10070 PLATE, TAPPET ADJU
029. [3C] 09031-10010 PLATE, TAPPET ADJU
029. [3C] 09031-10020 PLATE, TAPPET ADJU
029. [3C] 09031-10030 PLATE, TAPPET ADJU
029. [3C] 09031-10040 PLATE, TAPPET ADJU
029. [3C] 09031-10050 PLATE, TAPPET ADJU
029. [3C] 09031-10060 PLATE, TAPPET ADJU
030. [03] 90160-06051 NUT, HEXAGON
031. [03] 90258-06001 WASHER, SPRING 9025806001
032. [04] 94904-71360 BOLT, W/WASHER 21706600
033. [01] 94910-10120 BEARING, ROLLER 21706580
035. [01] 94914-00380 O-RING 21701410
036. [01] 94918-00690 SCREW, HOLLOW
043. [01] 94910-10071 BEARING, ROLLER
044. [3C] 09019-40350 PLATE, CAMSHAFT SH
044. [3C] 09019-40340 PLATE, CAMSHAFT SH
044. [3C] 09019-40100 PLATE, CAMSHAFT SH
044. [3C] 09019-40090 PLATE, CAMSHAFT SH
044. [3C] 09019-40080 PLATE, CAMSHAFT SH
044. [3C] 09019-40070 PLATE, CAMSHAFT SH
044. [3C] 09019-40360 PLATE, CAMSHAFT SH

Include in #3:

09010-07480 as BODY ASSY, INJECTI
19100-03780

Cross reference number



Part num Firm num Firm Name
09010-07480    BODY ASSY, INJECTI




Information:

It is not necessary to remove the oil pan.1. Remove the coolant from the cooling system.2. Use tooling (A) and remove oil filter (2). 3. Loosen clamps (1) and disconnect the bases.4. Remove bolt (4) and three bolts from behind the oil cooler. 5. Remove oil filter base and engine oil cooler (3) as a unit.Install Engine Oil Cooler And Oil Filter Base
1. Inspect the O-ring seals in the oil filter base. Install new seals if needed. Put oil on the seal. 2. Put oil filter base and oil cooler (1) in position on the engine.3. Install the four bolts that hold the oil cooler in place. 4. Connect the two hoses and install clamps (2).5. Install oil filter (3). See the instructions on the oil filter.Disassemble Engine Oil Cooler And Oil Filter Base
start by:a) remove engine oil cooler and oil filter base1. Remove bolts (1) and make a separation of cover (2) from the oil filter base. 2. Remove nuts (3) and make a separation of the oil cooler from oil filter base (4). 3. Remove divider (6) from oil cooler (5). 4. Remove plug (9), spring (8) and bypass valve (7). 5. Remove plug (12), spring (11) and bypass valve (10) from the oil filter base. Assemble Engine Oil Cooler And Oil Filter Base
1. Put valve (1) and spring (2) in position in oil filter base (4). 2. Install plug (3).3. Put the valve and spring (5) in position and install plug (6). 4. Put divider (7) in position between the fifth and sixth plates from the flange and on the same end as the short stud. 5. Install oil filter base (4) in position on oil cooler (8) and install the nuts. Tighten the nuts to a torque of 22 3 N m (16 2 lb.ft.).6. Install the gasket, cover (9) and the bolts. end by:a) install engine oil cooler and oil filter base

Have questions with 09010-07480?





09016-90180 BODY, INJECTION PU 09016-90130 09016-90120 09016-90110 09016-90100
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-07480

Back to top