Fuel injectors
  1. Home
  2. denso
  3. #09010-07290

09010-07290 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

BODY ASSY, INJECTI DA
  • *1 THE ELEMENT KIT P/N IS 190450-360 (NO.100)
  • THE ELEMENT KIT INCLUDES NO.2,3,4,6,7,8,9,10,11,12,13,
  • 14,15 AND 69.
09010-07290 BODY ASSY, INJECTI
Rating:
67
Buy BODY ASSY, INJECTI 09010-07290 genuine, new aftermarket engine parts with delivery

KIT List:

Body assy, injecti 1904400420
Body assy, injecti 1904400420

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-07290 BODY ASSY, INJECTI 22110-2260
001. [01] 09011-03720 HOUSING SUB-ASSY, 22101-2160A
001-001. [03] 94904-30010 BOLT, STUD 22853-1020A
002. [06] 09013-00150 HOLDER SUB-ASSY, D 22108-1040A
003. [06] 94914-02710 O-RING 22817-1040A
004. [06] 09013-60520 SPRING, DELIVERY V 22125-1030A
006. [06] 09014-01030 VALVE SUB-ASSY, IN 22103-1230A
007. [06] 94901-81451 WASHER, COPPER PLA 22847-1210A
008. [06] 09015-03190 ELEMENT SUB-ASSY, 22104-1820A
008. [06] 09015-04580 ELEMENT SUB-ASSY,
009. [06] 09042-00030 HOLDER ASSY, ELMEN 22144-1050A
010. [06] 94901-34340 WASHER, PLATE, SK 22867-1110A
011. [06] 09043-60030 COVER, ELEMENT 22332-1300A
012. [06] 94907-20780 RING, SNAP 98191-9103A
013. [12] 94914-01120 O-RING 22817-1100A
013. [12] 09013-90170 O-RING
014. [06] 94914-00991 O-RING 22817-1030A
015. [06] 09044-80010 DISTANCE RING 22131-1160A
016. [ C] 09043-80180 SHIM, ELEMENT HOLD 22885-3990A
016. [ C] 09043-80190 SHIM, ELEMENT HOLD 22885-4000A
016. [ C] 09043-80200 SHIM, ELEMENT HOLD 22885-4010A
016. [ C] 09043-80210 SHIM, ELEMENT HOLD 22885-4020A
016. [ C] 09043-80220 SHIM, ELEMENT HOLD 22885-2130A
016. [ C] 09043-80170 SHIM, ELEMENT HOLD 22885-3980A
016. [ C] 09043-80160 SHIM, ELEMENT HOLD 22885-3970A
016. [ C] 09043-80150 SHIM, ELEMENT HOLD 22885-3960A
016. [ C] 09043-80140 SHIM, ELEMENT HOLD 22885-3950A
016. [ C] 09043-80130 SHIM, ELEMENT HOLD 22885-3940A
016. [ C] 09043-80120 SHIM, ELEMENT HOLD 22885-2010A
016. [ C] 09043-80110 SHIM, ELEMENT HOLD 22885-2000A
016. [ C] 09043-80100 SHIM, ELEMENT HOLD 22885-1990A
017. [12] 94901-17040 WASHER, STEEL PLAT 22877-1030A
020. [01] 09021-00410 RACK ASSY, CONTROL 22113-1400A
020-001. [01] 09108-30222 ARM 22113-1400A
021. [01] 09011-40060 BUSHING, CONTROL R 22114-1090A
022. [01] 94908-20290 PIN, STRAIGHT 22358-1260A
023. [01] 09036-70010 BUSHING, CONTROL R 22841-1510A
024. [06] 09016-00020 SLEEVE SUB-ASSY, C 22118-1020A
025. [06] 09016-30060 SEAT, SPRING, UPR 22119-1040A
026. [06] 09016-40130 SPRING, PUMP PLUNG 22121-1060A
027. [06] 09016-50041 SEAT, SPRING, LWR 22122-1080A
028. [06] 09017-00110 TAPPET SUB-ASSY,IN 22309-2180A
028-001. [06] 09018-10170 ROLLER, INJECTION 22569-1080A
028-002. [06] 09017-80060 BUSHING, INJECTION 22322-1410A
028-003. [06] 09016-90100 BODY, INJECTION PU 22568-1120A
028-004. [06] 09017-60080 PIN, INJECTION PUM 22358-1250A
029. [01] 09019-10930 CAMSHAFT, INJECTIO
030. [01] 09036-10140 BEARING, CENTER 22837-1210A
033. [02] 94910-10130 BEARING, ROLLER 22837-1050A
034. [01] 09020-10110 COVER, BEARING 22111-1190A
035. [01] 94915-01420 SEAL, OIL 22827-1020A
035. [01] 94915-02820 SEAL, OIL 22827-1750A
036. [01] 94914-03940 O-RING 22817-1470A
037. [ C] 09020-80070 PLATE, SHIM 22881-2920A
037. [ C] 09020-80060 PLATE, SHIM 22881-2910A
037. [ C] 09020-80050 PLATE, SHIM 22881-2900A
037. [ C] 09020-80040 PLATE, SHIM 22881-2890A
037. [ C] 09020-80030 PLATE, SHIM 22881-2880A
037. [ C] 09020-80020 PLATE, SHIM 22881-2870A
037. [ C] 09020-80010 PLATE, SHIM 22881-2860A
038. [01] 09043-30010 RETAINER, BEARING 22111-1200A
041. [01] 09031-70070 PLUG, SCREW 22845-1070A
042. [06] 09031-70060 PLUG, SCREW 22845-1060A
043. [01] 09027-10380 PLATE, INJECTION P
044. [12] 90045-06121 SCREW, SLOTTED POL 22865-1130A
048. [01] 94918-00310 SCREW, HOLLOW 22835-1310A
052. [01] 94918-00570 SCREW, HOLLOW 22835-1360A
053. [02] 94901-02470 WASHER 22877-1120A
055. [01] 09024-50180 SCREW, HOLLOW
056. [02] 94901-02500 WASHER 22847-1920A
059. [02] 94901-02490 WASHER 22847-1910A
061. [02] 94904-71790 BOLT, W/WASHER 22815-1430A
063. [01] 09010-60040 GASKET, FEED PUMP 22847-1520A
063. [01] 94914-00380 O-RING 22817-1540A
065. [01] 09027-20260 GASKET, INJECTION
066. [01] 94901-80710 WASHER, COPPER PLA 22863-1300A
067. [06] 94901-81500 WASHER, COPPER PLA 22847-1120A
069. [ C] 94901-35070 WASHER, PLATE, SK 22885-1260A
069. [ C] 94901-35080 WASHER, PLATE, SK 22885-1270A
069. [ C] 94901-35090 WASHER, PLATE, SK 22885-1280A
069. [ C] 94901-35100 WASHER, PLATE, SK 22885-1290A
070. [ C] 09011-80100 NEEDLE, TIMING 22132-1070A
070. [ C] 09011-80110 NEEDLE, TIMING 22132-1080A
070. [ C] 09011-80120 NEEDLE, TIMING 22132-1090A
100. [01] 19045-00360 ELEMENT KIT, INJEC

Include in #3:

09010-07290 as BODY ASSY, INJECTI
19100-03290

Cross reference number



Part num Firm num Firm Name
09010-07290  22110-2260  BODY ASSY, INJECTI
22110-2260A    HINO BODY ASSY, INJECTI
22110-2260    HINO BODY ASSY, INJECTI




Information:

It is not necessary to remove the oil pan.1. Remove the coolant from the cooling system.2. Use tooling (A) and remove oil filter (2). 3. Loosen clamps (1) and disconnect the bases.4. Remove bolt (4) and three bolts from behind the oil cooler. 5. Remove oil filter base and engine oil cooler (3) as a unit.Install Engine Oil Cooler And Oil Filter Base
1. Inspect the O-ring seals in the oil filter base. Install new seals if needed. Put oil on the seal. 2. Put oil filter base and oil cooler (1) in position on the engine.3. Install the four bolts that hold the oil cooler in place. 4. Connect the two hoses and install clamps (2).5. Install oil filter (3). See the instructions on the oil filter.Disassemble Engine Oil Cooler And Oil Filter Base
start by:a) remove engine oil cooler and oil filter base1. Remove bolts (1) and make a separation of cover (2) from the oil filter base. 2. Remove nuts (3) and make a separation of the oil cooler from oil filter base (4). 3. Remove divider (6) from oil cooler (5). 4. Remove plug (9), spring (8) and bypass valve (7). 5. Remove plug (12), spring (11) and bypass valve (10) from the oil filter base. Assemble Engine Oil Cooler And Oil Filter Base
1. Put valve (1) and spring (2) in position in oil filter base (4). 2. Install plug (3).3. Put the valve and spring (5) in position and install plug (6). 4. Put divider (7) in position between the fifth and sixth plates from the flange and on the same end as the short stud. 5. Install oil filter base (4) in position on oil cooler (8) and install the nuts. Tighten the nuts to a torque of 22 3 N m (16 2 lb.ft.).6. Install the gasket, cover (9) and the bolts. end by:a) install engine oil cooler and oil filter base

Have questions with 09010-07290?





09016-90180 BODY, INJECTION PU 09016-90130 09016-90120 09016-90110 09016-90100
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-07290

Back to top