Fuel injectors
  1. Home
  2. denso
  3. #09010-05850

09010-05850 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-05850 BODY ASSY, INJECTI
Rating:
20
Buy BODY ASSY, INJECTI 09010-05850 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-05850 BODY ASSY, INJECTI
001. [01] 09011-02740 HOUSING SUB-ASSY,
001-001. [03] 94904-30010 BOLT, STUD
002. [06] 09013-00180 HOLDER SUB-ASSY, D
003. [06] 94914-02710 O-RING
004. [06] 09013-60350 SPRING, DELIVERY V
006. [06] 09014-01270 VALVE SUB-ASSY, IN
007. [06] 94901-81451 WASHER, COPPER PLA
008. [06] 09015-01690 ELEMENT SUB-ASSY,
009. [06] 09042-00030 HOLDER ASSY, ELMEN
009-001. [06] 09044-80010 DISTANCE RING
010. [06] 94901-34340 WASHER, PLATE, SK
011. [06] 09043-60030 COVER, ELEMENT
012. [06] 94907-20780 RING, SNAP
013. [12] 94914-01120 O-RING
013. [12] 09013-90170 O-RING
014. [06] 94914-00991 O-RING
016. [ C] 09043-80170 SHIM, ELEMENT HOLD
016. [ C] 09043-80180 SHIM, ELEMENT HOLD
016. [ C] 09043-80190 SHIM, ELEMENT HOLD
016. [ C] 09043-80200 SHIM, ELEMENT HOLD
016. [ C] 09043-80210 SHIM, ELEMENT HOLD
016. [ C] 09043-80220 SHIM, ELEMENT HOLD
016. [ C] 09043-80230 SHIM, ELEMENT HOLD
016. [ C] 09043-80160 SHIM, ELEMENT HOLD
016. [ C] 09043-80150 SHIM, ELEMENT HOLD
016. [ C] 09043-80080 SHIM, ELEMENT HOLD
016. [ C] 09043-80090 SHIM, ELEMENT HOLD
016. [ C] 09043-80100 SHIM, ELEMENT HOLD
016. [ C] 09043-80110 SHIM, ELEMENT HOLD
016. [ C] 09043-80120 SHIM, ELEMENT HOLD
016. [ C] 09043-80130 SHIM, ELEMENT HOLD
016. [ C] 09043-80140 SHIM, ELEMENT HOLD
017. [12] 94901-17040 WASHER, STEEL PLAT
018. [12] 90258-10001 WASHER, SPRING
019. [12] 90160-10081 NUT, HEXAGON
020. [01] 09021-20340 RACK, CONTROL
021. [02] 09011-40060 BUSHING, CONTROL R
022. [01] 94908-20290 PIN, STRAIGHT
023. [01] 09036-70010 BUSHING, CONTROL R
024. [06] 09016-00020 SLEEVE SUB-ASSY, C
024. [06] 09016-00130 SLEEVE SUB-ASSY, C
025. [06] 09016-30060 SEAT, SPRING, UPR
026. [06] 09016-40130 SPRING, PUMP PLUNG
027. [06] 09016-50041 SEAT, SPRING, LWR
028. [06] 09017-00110 TAPPET SUB-ASSY,IN
028-001. [06] 09017-10131 TAPPET, INJECTION
028-002. [06] 09018-10170 ROLLER, INJECTION
028-003. [06] 09017-80060 BUSHING, INJECTION
028-004. [06] 09017-60080 PIN, INJECTION PUM
028-005. [06] 09017-50040 SLIDER
029. [01] 09019-10540 CAMSHAFT, INJECTIO
030. [01] 09036-10110 BEARING, CENTER
031. [07] 90258-06001 WASHER, SPRING
032. [06] 90015-06181 SCREW, SLOTTED OVA
033. [02] 94910-10130 BEARING, ROLLER
034. [01] 09020-10400 COVER, BEARING
035. [01] 94915-02820 SEAL, OIL
035. [01] 94915-01420 SEAL, OIL
036. [01] 94914-03940 O-RING
037. [2C] 09020-80140 PLATE, SHIM
037. [2C] 09020-80130 PLATE, SHIM
037. [2C] 09020-80120 PLATE, SHIM
037. [2C] 09020-80110 PLATE, SHIM
037. [2C] 09020-80100 PLATE, SHIM
037. [2C] 09020-80090 PLATE, SHIM
037. [2C] 09020-80080 PLATE, SHIM
038. [01] 09043-30010 RETAINER, BEARING
039. [01] 94914-02720 O-RING
040. [03] 90160-06051 NUT, HEXAGON
041. [01] 09031-70070 PLUG, SCREW
042. [06] 09031-70060 PLUG, SCREW
043. [01] 09027-10340 PLATE, INJECTION P
043. [01] 09027-10380 PLATE, INJECTION P
044. [12] 90045-06121 SCREW, SLOTTED POL
045. [01] 09043-10031 COVER, DELIVERY VA
046. [02] 90060-06351 SCREW, CROSSRECESS
047. [02] 09140-30110 WASHER, LOCK
048. [01] 09027-20260 GASKET, INJECTION
048. [01] 09027-20140 GASKET, INJECTION
049. [02] 94901-80550 WASHER, COPPER PLA
050. [01] 09022-40021 SCREW,PLUG
051. [01] 09031-00160 VALVE ASSY, OVERFL
052. [02] 90200-06241 WASHER, PLATE
054. [01] 09010-80010 NEEDLE SUB-ASSY, T
055. [01] 94901-80710 WASHER, COPPER PLA
056. [06] 94901-81500 WASHER, COPPER PLA
057. [02] 90107-06101 BOLT, HEXAGON
058. [04] 94901-50740 WASHER, SPRING
061. [01] 94914-00380 O-RING

Include in #3:

09010-05850 as BODY ASSY, INJECTI
19000-08790

Cross reference number



Part num Firm num Firm Name
09010-05850    BODY ASSY, INJECTI




Information:

start by:a) remove flywheel 1. Use tool (A) to remove the crankshaft rear seal.2. Install tool (C) in the rear seal bore.
TYPICAL EXAMPLE3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the ends of the tool make a flat piece (crease) in the wear sleeve. Do this in two or more places until the wear sleeve is loose.4. Remove tool (C) and the wear sleeve by hand.Install Crankshaft Rear Seal And Wear Sleeve
1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows: a) Put locator (1) in position on the crankshaft and install the three bolts that hold it in place.b) Put clean engine oil on the seal lip of seal (6) and on the outside diameter of wear sleeve (2).c) Install seal (6) on wear sleeve (2) from the end of the wear sleeve that has the bevel on the outside diameter. Make sure the lip of the seal is toward the inside of the engine and the bevel that is on the outside diameter of the wear sleeve is toward the outside of the engine when installed.d) Use 8M8060 Quick Cure Primer to clean the outside diameter of the crankshaft flange (3) and the inside diameter of wear sleeve (2).e) Put 9S3265 Retaining Compound on the outside diameter of crankshaft flange (3) and the inside diameter of wear sleeve (2). Make sure the lip of the seal is toward the inside of the engine and the outside diameter bevel of the wear sleeve is toward the outside of the engine.f) Put wear sleeve (2) with seal (6) on locator (1). Put installer (4) on locator (1) and install nut (5). Put lubrication on the face of the washer and the nut.g) Tighten nut (5) until installer (4) comes in contact with locator (1).h) Remove tooling (A) and check the wear sleeve and seal for correct installation.end by:a) install flywheel

Have questions with 09010-05850?





09016-90130 BODY, INJECTION PU 09016-90120 09016-90110 09016-90100 09016-90070
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-05850

Back to top