Fuel injectors
  1. Home
  2. denso
  3. #09010-05651

09010-05651 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-05651 BODY ASSY, INJECTI
Rating:
76
Buy BODY ASSY, INJECTI 09010-05651 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [04] 09010-05651 BODY ASSY, INJECTI
001. [03] 19011-03341 HOUSING KIT, INJEC
001-001. [03] 94904-30010 BOLT, STUD 85265-00057
003. [04] 09013-10650 HOLDER, DELIVERY V
004. [04] 09013-30261 STOPPER, DELIVERY
005. [04] 09013-60710 SPRING, DELIVERY V
006. [04] 09013-70100 GASKET, DELIVERY V 09013-70100
007. [04] 09014-01420 VALVE SUB-ASSY, IN
008. [04] 09015-03050 ELEMENT SUB-ASSY,
009. [04] 09015-60010 PINION, PLUNGER CO 85265-00074
010. [04] 09015-70010 SCREW, PLUNGER CON 85265-00027
011. [04] 09016-10160 SLEEVE, PLUNGER CO 85265-00073
011. [04] 09016-10330 SLEEVE, PLUNGER CO
012. [04] 09016-30010 SEAT, SPRING, UPR 09016-30010
012. [04] 09016-30191 SEAT, SPRING, UPR
013. [04] 09016-40090 SPRING, PUMP PLUNG 09016-40090
014. [04] 09016-50160 SEAT, SPRING, LWR 09016-50160
015. [04] 09017-00070 TAPPET SUB-ASSY,IN 09017-00070
016. [04] 09018-90060 PLUG, INJECTION PU 85265-00075
016. [04] 09018-90090 PLUG, INJECTION PU 09018-90090
017. [01] 09019-10860 CAMSHAFT, INJECTIO 09019-10860
018. [01] 09019-30020 RING, CAMSHAFT ADJ 09019-30020
019. [3C] 09019-40010 PLATE, CAMSHAFT SH 09019-40010
019. [3C] 09019-40400 PLATE, CAMSHAFT SH
019. [3C] 09019-40290 PLATE, CAMSHAFT SH
019. [3C] 09019-40150 PLATE, CAMSHAFT SH
019. [3C] 09019-40140 PLATE, CAMSHAFT SH
019. [3C] 09019-40110 PLATE, CAMSHAFT SH 09019-40110
019. [3C] 09019-40060 PLATE, CAMSHAFT SH 09019-40060
019. [3C] 09019-40050 PLATE, CAMSHAFT SH 09019-40050
019. [3C] 09019-40040 PLATE, CAMSHAFT SH 09019-40040
019. [3C] 09019-40030 PLATE, CAMSHAFT SH 09019-40030
019. [3C] 09019-40020 PLATE, CAMSHAFT SH 09019-40020
020. [01] 09020-10351 COVER, BEARING 09020-10351
021. [01] 09020-60150 GASKET, BEARING CO
021. [01] 09020-60040 GASKET, BEARING CO
022. [01] 09021-20020 RACK, CONTROL 09021-20020
023. [01] 09021-50011 SCREW, RACK GUIDE 09021-50011
023. [01] 09021-50060 SCREW, RACK GUIDE 09021-50060
024. [02] 09022-20060 WASHER, FUEL PIPE 09022-20060
025. [02] 09023-00031 PLATE SET, VALVE H 85265-00052
025. [02] 09023-00050 PLATE SET, VALVE H 09023-00050
026. [04] 94914-02570 O-RING 94914-02570
027. [02] 09025-10010 WASHER, INJECTION 85265-00077
028. [01] 09027-00961 COVER SUB-ASSY, IN 09027-00961
028. [01] 09027-01460 COVER SUB-ASSY, IN
028-001. [01] 09027-50182 PROCESSING DRAWING
028-002. [01] 09027-20210 GASKET, INJECTION
028-003. [02] 09024-30030 PACKING, AIR BLEED 85265-00016
028-004. [02] 09027-60030 SCREW
029. [4C] 09031-10090 PLATE, TAPPET ADJU 09031-10090
029. [4C] 09031-10100 PLATE, TAPPET ADJU 09031-10100
029. [4C] 09031-10110 PLATE, TAPPET ADJU 09031-10110
029. [4C] 09031-10120 PLATE, TAPPET ADJU 09031-10120
029. [4C] 09031-10130 PLATE, TAPPET ADJU 09031-10130
029. [4C] 09031-10140 PLATE, TAPPET ADJU 09031-10140
029. [4C] 09031-10080 PLATE, TAPPET ADJU 09031-10080
029. [4C] 09031-10070 PLATE, TAPPET ADJU 09031-10070
029. [4C] 09031-10060 PLATE, TAPPET ADJU 09031-10060
029. [4C] 09031-10050 PLATE, TAPPET ADJU 09031-10050
029. [4C] 09031-10040 PLATE, TAPPET ADJU 09031-10040
029. [4C] 09031-10030 PLATE, TAPPET ADJU 09031-10030
029. [4C] 09031-10020 PLATE, TAPPET ADJU 09031-10020
029. [4C] 09031-10010 PLATE, TAPPET ADJU 09031-10010
029. [4C] 09031-10150 PLATE, TAPPET ADJU 09031-10150
030. [03] 90160-06051 NUT, HEXAGON 85265-00085
031. [03] 90258-06001 WASHER, SPRING 90258-06001
032. [04] 91418-06201 BOLT, W/WASHER 91418-06201
033. [01] 94910-10120 BEARING, ROLLER 94910-10121
035. [01] 94914-00380 O-RING 85265-00084
036. [01] 94918-00060 SCREW, HOLLOW 85265-00076
037. [01] 09031-00050 VALVE ASSY, OVERFL 09031-00050
037. [01] 09031-00130 VALVE ASSY, OVERFL 09031-00050
043. [01] 94910-10071 BEARING, ROLLER
044. [01] 09019-30050 RING, CAMSHAFT ADJ
045. [3C] 09019-40360 PLATE, CAMSHAFT SH
045. [3C] 09019-40410 PLATE, CAMSHAFT SH
045. [3C] 09019-40350 PLATE, CAMSHAFT SH
045. [3C] 09019-40340 PLATE, CAMSHAFT SH
045. [3C] 09019-40170 PLATE, CAMSHAFT SH
045. [3C] 09019-40160 PLATE, CAMSHAFT SH
045. [3C] 09019-40100 PLATE, CAMSHAFT SH 09019-40100
045. [3C] 09019-40090 PLATE, CAMSHAFT SH 09019-40090
045. [3C] 09019-40080 PLATE, CAMSHAFT SH 09019-40080
045. [3C] 09019-40070 PLATE, CAMSHAFT SH 09019-40070
046. [01] 94918-00310 SCREW, HOLLOW 85265-00078
048. [02] 09022-20070 WASHER, FUEL PIPE 85265-00079

Include in #3:

09010-05651 as BODY ASSY, INJECTI
19000-07882
19100-01731

Cross reference number



Part num Firm num Firm Name
09010-05651    BODY ASSY, INJECTI




Information:

start by:a) remove oil pump1. Check the identification on the connecting rods and caps as to their location in the engine. The caps must be installed in original positions in the engine.2. Turn the crankshaft until two of the pistons are at bottom center. 3. Remove connecting rod caps (1) from the connecting rods. Remove the lower half of the bearings from the caps.
Be careful not to damage the crankshaft journals. Do not turn the crankshaft while any of the connecting rod caps are removed.
4. Push the connecting rod away from the crankshaft and remove the upper half of the bearings from the connecting rods.5. Make sure the surface of the connecting rod where the bearings make contact is clean and free of dirt.
Make sure the tabs on the bearings are in alignment with the notches in the connecting rods and caps.
6. Install the upper half of new bearings in the connecting rods.7. Pull the connecting rod down slowly on the crankshaft.
Make sure the surfaces where the bearings make contact in the caps are clean and free of dirt.
8. Install new bearings (2) in the caps. Make sure the tabs on the bearings are in alignment with the notches in the caps.9. Put clean engine oil on the threads of the bolts in the connecting rods.10. Check the bearing clearance with Plastigage (A) as follows: a) Make sure the numbers on the caps and connecting rods are the same and are on the same respective side. If new connecting rods are installed, put the cylinder number on the rods and caps.b) Put the caps and plastigage (A) in the correct position on the connecting rods. Install the nuts that hold them.c) Tighten the two nuts evenly to a torque of 60 6 lb.ft. (81.3 8.1 N m). Put a mark on each nut and tighten the nuts 120° more from the marks. d) Remove the caps from the connecting rods and Plastigage (A). Measure the thickness of the Plastigage. The connecting rod bearing clearance must be .0028 to .0066 in. (0.071 to 0.168 mm) for new bearings.e) Put clean engine oil in the bearing caps and install them again. Follow the tightening procedure in Step 10.f) Do Steps 1 through 10 for the other connecting rod bearings.end by:a) install oil pump

Have questions with 09010-05651?





09016-90130 BODY, INJECTION PU 09016-90120 09016-90110 09016-90100 09016-90070
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-05651

Back to top