Fuel injectors
  1. Home
  2. denso
  3. #09010-03852

09010-03852 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-03852 BODY ASSY, INJECTI
Rating:
2
Buy BODY ASSY, INJECTI 09010-03852 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-03852 BODY ASSY, INJECTI 22110-1390
001. [01] 09011-02200 HOUSING SUB-ASSY,
001-001. [03] 94904-30010 BOLT, STUD 22857-1060A
001-002. [03] 09022-10022 UNION, INJECTION P 22131-1040
002. [08] 09013-00130 HOLDER SUB-ASSY, D 22108-1070A
003. [08] 94914-02710 O-RING 22817-1040A
006. [08] 09014-01020 VALVE SUB-ASSY, IN 22103-1140
007. [08] 94901-81451 WASHER, COPPER PLA 22847-1210A
008. [08] 09015-04550 ELEMENT SUB-ASSY,
009. [08] 09042-00020 HOLDER ASSY, ELMEN
010. [08] 94901-34340 WASHER, PLATE, SK 22867-1110A
011. [08] 09043-60030 COVER, ELEMENT 22332-1300A
012. [08] 94907-20780 RING, SNAP 98191-9103A
013. [16] 09013-90170 O-RING
014. [08] 94914-00991 O-RING 22817-1030A
015. [08] 94901-00680 WASHER 22863-1290A
016. [ C] 09043-80540 SHIM, ELEMENT HOLD
016. [ C] 09043-80530 SHIM, ELEMENT HOLD
016. [ C] 09043-80060 SHIM, ELEMENT HOLD 22881-2850
016. [ C] 09043-80050 SHIM, ELEMENT HOLD 22881-2840
016. [ C] 09043-80040 SHIM, ELEMENT HOLD 22881-2830
016. [ C] 09043-80030 SHIM, ELEMENT HOLD 22881-2820
016. [ C] 09043-80020 SHIM, ELEMENT HOLD 22881-2810
016. [ C] 09043-80010 SHIM, ELEMENT HOLD 22881-2800A
017. [16] 94901-17040 WASHER, STEEL PLAT 22877-1030A
018. [16] 90258-10001 WASHER, SPRING 28219-1120A
019. [16] 90160-10081 NUT, HEXAGON 22825-1090A
020. [01] 09021-00390 RACK ASSY, CONTROL 22113-1120A
021. [02] 09011-40060 BUSHING, CONTROL R 22114-1090A
022. [01] 94908-20290 PIN, STRAIGHT 22358-1260A
023. [01] 09036-70010 BUSHING, CONTROL R 22841-1510A
024. [08] 09016-00130 SLEEVE SUB-ASSY, C
025. [08] 09016-30060 SEAT, SPRING, UPR 22119-1040A
026. [08] 09016-40130 SPRING, PUMP PLUNG 22121-1060A
027. [08] 09016-50041 SEAT, SPRING, LWR 22122-1080A
028. [08] 09017-00110 TAPPET SUB-ASSY,IN 22309-2180A
028-001. [08] 09018-10170 ROLLER, INJECTION 22569-1080A
028-002. [08] 09017-80060 BUSHING, INJECTION 22322-1410A
028-003. [08] 09016-90100 BODY, INJECTION PU 22568-1120A
028-003. [08] 09017-10131 TAPPET, INJECTION
028-004. [08] 09017-60080 PIN, INJECTION PUM 22358-1250A
028-005. [08] 09017-50040 SLIDER 6 306 1205 40
029. [01] 09019-10630 CAMSHAFT, INJECTIO
030. [01] 09036-10070 BEARING, CENTER 22837-1010A
031. [09] 90258-06001 WASHER, SPRING 28219-1110A
032. [02] 90015-06181 SCREW, SLOTTED OVA 22865-1010A
033. [02] 94910-10130 BEARING, ROLLER 22837-1050A
034. [01] 09020-10110 COVER, BEARING 22111-1190A
035. [01] 94915-02820 SEAL, OIL 22827-1750A
036. [01] 94914-03940 O-RING 22817-1470A
037. [2C] 09020-80070 PLATE, SHIM 22881-2920A
037. [2C] 09020-80060 PLATE, SHIM 22881-2910A
037. [2C] 09020-80050 PLATE, SHIM 22881-2900A
037. [2C] 09020-80040 PLATE, SHIM 22881-2890A
037. [2C] 09020-80030 PLATE, SHIM 22881-2880A
037. [2C] 09020-80020 PLATE, SHIM 22881-2870A
037. [2C] 09020-80010 PLATE, SHIM 22881-2860A
038. [01] 09043-30010 RETAINER, BEARING 22111-1200A
039. [04] 90000-06151 SCREW, SLOTTED PAN 22815-1570A
040. [03] 90160-06051 NUT, HEXAGON 22825-1480A
041. [01] 09031-70070 PLUG, SCREW 22845-1070A
042. [08] 09031-70060 PLUG, SCREW 22845-1060A
043. [01] 09027-10330 PLATE, INJECTION P 22127-1040A
043. [01] 09027-10390 PLATE, INJECTION P 22127-1180A
044. [16] 90045-06121 SCREW, SLOTTED POL 22865-1130A
045. [01] 09043-10040 COVER, DELIVERY VA 22136-1090A
045. [01] 09043-10050 COVER, DELIVERY VA
047. [02] 90160-06451 NUT, HEXAGON
048. [01] 09024-50190 SCREW, HOLLOW 22835-1140A
049. [01] 09027-20270 GASKET, INJECTION 22847-1810A
050. [01] 09022-20050 WASHER, FUEL PIPE 22847-1250A
051. [01] 09022-40021 SCREW,PLUG 22845-1020
052. [01] 09024-50120 SCREW, HOLLOW 22835-1060A
053. [03] 94901-02470 WASHER 22847-1900A
055. [01] 09024-50130 SCREW, HOLLOW 22835-1070A
056. [02] 94901-02500 WASHER 22847-1920A
058. [01] 09031-00120 VALVE ASSY, OVERFL 22107-1140A
059. [07] 94901-02490 WASHER 22877-1100A
060. [1C] 09011-80100 NEEDLE, TIMING 22132-1070A
060. [1C] 09011-80110 NEEDLE, TIMING 22132-1080A
060. [1C] 09011-80120 NEEDLE, TIMING 22132-1090A
061. [02] 94904-71790 BOLT, W/WASHER 22815-1430A
063. [01] 09010-60040 GASKET, FEED PUMP 22847-1520A
063. [01] 94914-00380 O-RING 22817-1540A
065. [08] 09013-60520 SPRING, DELIVERY V 22125-1030A
066. [8C] 94901-35100 WASHER, PLATE, SK 22885-1290A
066. [8C] 94901-35090 WASHER, PLATE, SK 22885-1280A
066. [8C] 94901-35080 WASHER, PLATE, SK 22885-1270A
066. [8C] 94901-35070 WASHER, PLATE, SK 22885-1260A
067. [02] 09140-30110 WASHER, LOCK 22877-1020A
068. [08] 94901-81500 WASHER, COPPER PLA 22847-1120A
069. [01] 94901-80710 WASHER, COPPER PLA 22863-1300A

Include in #3:

09010-03852 as BODY ASSY, INJECTI
19000-02743

Cross reference number



Part num Firm num Firm Name
09010-03852  22110-1390  BODY ASSY, INJECTI




Information:

Oil Pump
Disassembly and Inspection of Oil Pump
Measurement of Clearance Between Outer Rotor and Inner Rotor
Measure the clearance between the outer rotor and inner rotor, and, if the limit value is exceeded, replace the pump assembly.
Measurement of clearance between outer rotor and inner rotorMeasurement of Rotor and Case End Play
Measure the rotor and case end play, and, if the limit value is exceeded, replace the pump assembly.
Measurement of rotor and cover end playMeasurement of Clearance Between Outer Rotor and Pump Case
Measure the clearance between the outer rotor and pump case, and, if the limit value is exceeded, replace the pump assembly.
Measure the clearance between the outer rotor and caseReassembly of Oil Pump
Install the outer rotor to the pump case, check alignment mark (indentations) on the pump case cover, and then tighten the bolts. If the alignment marks are not aligned during the reassembly, the pump will not suck oil.
Alignment marks on pump case and pump case coverOil Cooler and Relief Valve
Inspection of Oil Cooler and Relief Valve
Adjustment of Relief Valve
(1) Check the relief valve and valve seat for contact condition, and the spring for fatigue and damage, and replace any defective parts.(2) Measure the valve opening pressure (oil pressure when the engine is running at rated rpm) of the relief valve, and, if the standard valve is exceeded, remove the cap bolt and make an adjustment by increasing or decreasing the shim thickness.Engine oil pressure take-out port next to oil filter
Relief Valve

Have questions with 09010-03852?





09016-90130 BODY, INJECTION PU 09016-90120 09016-90110 09016-90100 09016-90070
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-03852

Back to top