Fuel injectors
  1. Home
  2. denso
  3. #09010-03840

09010-03840 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-03840 BODY ASSY, INJECTI
Rating:
30
Buy BODY ASSY, INJECTI 09010-03840 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-03940 BODY ASSY, INJECTI
001. [01] 19011-02210 HOUSING KIT, INJEC
001-001. [03] 94904-30010 BOLT, STUD ME702091
003. [06] 09015-02180 ELEMENT SUB-ASSY,
004. [06] 09014-00061 VALVE SUB-ASSY, IN 90140-0061
005. [06] 09013-70010 GASKET, DELIVERY V ME022084
006. [06] 09013-60040 SPRING, DELIVERY V ME022617
007. [06] 09013-10010 HOLDER, DELIVERY V ME022081
008. [01] 09021-20010 RACK, CONTROL ME702079
009. [01] 09021-50060 SCREW, RACK GUIDE ME728163
009. [01] 09021-50010 SCREW, RACK GUIDE ME702080
010. [06] 09016-10160 SLEEVE, PLUNGER CO ME022134
010. [06] 09016-10330 SLEEVE, PLUNGER CO ME702060
011. [06] 09015-60010 PINION, PLUNGER CO ME702058
012. [06] 09015-70010 SCREW, PLUNGER CON ME702059
013. [06] 09016-30010 SEAT, SPRING, UPR ME702061
013. [06] 09016-30191 SEAT, SPRING, UPR ME736080
014. [06] 09016-40090 SPRING, PUMP PLUNG ME702554
015. [06] 09016-50020 SEAT, SPRING, LWR MM500879
016. [06] 09017-00070 TAPPET SUB-ASSY,IN ME702556
017. [06] 09018-90060 PLUG, INJECTION PU ME702071
018. [01] 09019-10470 CAMSHAFT, INJECTIO ME703938
020. [02] 94910-10120 BEARING, ROLLER ME702096
021. [02] 09019-30030 RING, CAMSHAFT ADJ ME703486
023. [01] 09020-10300 COVER, BEARING ME728839
025. [03] 90258-06001 WASHER, SPRING ME702596
029. [01] 09027-00622 COVER SUB-ASSY, IN 09027-00621
029-001. [01] 09027-50083 PROCESSING DRAWING ME702602
029-002. [02] 09024-30030 PACKING, AIR BLEED ME702057
029-003. [02] 09027-60030 SCREW ME703028
029-004. [01] 09027-20220 GASKET, INJECTION ME702085
031. [03] 09023-00031 PLATE SET, VALVE H ME702082
034. [03] 90160-06051 NUT, HEXAGON ME702588
037. [01] 94914-00060 O-RING MM500727
039. [01] 09036-10040 BEARING, CENTER ME702088
040. [02] 91050-05351 SCREW, CROSSRECESS ME702597
040. [02] 09036-60021 SCREW, GUIDE ME022106
041. [02] 94901-81030 WASHER, COPPER PLA ME702094
043. [01] 09024-00010 BLEEDER SUB-ASSY, ME702083
043-001. [01] 09024-10010 WASHER, AIR BLEEDE ME702102
043-002. [01] 09024-20010 NIPPLE, AIR BLEEDE ME022094
043-003. [01] 09024-30030 PACKING, AIR BLEED ME702057
043-004. [01] 09024-40010 SCREW, AIR BLEEDER MM501930
047. [01] 94914-00380 O-RING ME702097
048. [01] 94918-00060 SCREW, HOLLOW ME702598
050. [02] 09025-10010 WASHER, INJECTION ME702595
051. [ C] 09019-40010 PLATE, CAMSHAFT SH ME702075
051. [ C] 09019-40020 PLATE, CAMSHAFT SH ME022099
051. [ C] 09019-40030 PLATE, CAMSHAFT SH ME022100
051. [ C] 09019-40040 PLATE, CAMSHAFT SH ME022101
051. [ C] 09019-40050 PLATE, CAMSHAFT SH ME022102
051. [ C] 09019-40060 PLATE, CAMSHAFT SH ME022103
051. [ C] 09019-40110 PLATE, CAMSHAFT SH ME703583
052. [01] 94918-00310 SCREW, HOLLOW ME702236
053. [02] 09022-20070 WASHER, FUEL PIPE ME702217
054. [04] 94904-71360 BOLT, W/WASHER ME022507
055. [ C] 09031-10150 PLATE, TAPPET ADJU MM500313
055. [ C] 09031-10140 PLATE, TAPPET ADJU MM500312
055. [ C] 09031-10130 PLATE, TAPPET ADJU MM500311
055. [ C] 09031-10120 PLATE, TAPPET ADJU MM500310
055. [ C] 09031-10110 PLATE, TAPPET ADJU MM500309
055. [ C] 09031-10100 PLATE, TAPPET ADJU MM500308
055. [ C] 09031-10090 PLATE, TAPPET ADJU MM500307
055. [ C] 09031-10080 PLATE, TAPPET ADJU MM500306
055. [ C] 09031-10070 PLATE, TAPPET ADJU MM500305
055. [ C] 09031-10060 PLATE, TAPPET ADJU MM500304
055. [ C] 09031-10050 PLATE, TAPPET ADJU MM500303
055. [ C] 09031-10040 PLATE, TAPPET ADJU MM500302
055. [ C] 09031-10030 PLATE, TAPPET ADJU MM500301
055. [ C] 09031-10020 PLATE, TAPPET ADJU MM500300
055. [ C] 09031-10010 PLATE, TAPPET ADJU ME702559
056. [01] 09020-60010 GASKET, BEARING CO ME703584
056. [01] 09020-60160 GASKET, BEARING CO ME728820

Include in #3:

19000-02730 as BODY ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09010-03840  31761-2207  BODY ASSY, INJECTI
31761-22070    MITSUBISHI BODY ASSY, INJECTI




Information:

START BY:a. remove vibration damper and pulley
The crankshaft front seal and wear sleeve come as a set and must be installed as a set. If a replacement of the seal is to be made, a replacement of the wear sleeve must also be made.
1. Make at least three holes in seal (1) with a hammer and a sharp punch. 2. Use tool (A) to remove seal (1). 3. Install tool (C) in the seal bore.4. Install tool (B) between tool (C) and wear sleeve (2). Turn tool (B) until the tool makes a dent (crease) in wear sleeve (2). Do this in three or more places until the wear sleeve is loose.5. Remove tools (B) and (C), and remove wear sleeve (2) from the crankshaft.Install Crankshaft Front Seal And Wear Sleeve
The crankshaft seal and wear sleeve come as a set and must not be separated from each other at any time. Carefully read Special Instruction, Form No. SMHS8508, that is included with each seal and wear sleeve before any handling of the seal group is made.
1. Install the front crankshaft seal and wear sleeve with tooling (A). Use the procedure which follows:a. Clean and make a preparation of the wear sleeve inside diameter and crankshaft outside diameter with 6V1541 Quick Cure Primer. Make an application of 9S3265 Retaining Compound to the crankshaft outside diameter before the wear sleeve is installed on the crankshaft. Do not let any Quick Cure Primer or Retaining Compound get on the lip of the seal.b. Install locator (1) and bolts (3) on the crankshaft.c. Seal (6) and wear sleeve (2) must be installed dry.
Make sure the seal is installed with the part number and the arrows showing crankshaft rotation toward the outside.
The front and rear seals and wear sleeves have different spiral grooves in the seal. Because of this type of design, the front seal group for an engine is different from the rear seal group. If a seal group is installed on the wrong end of the engine, oil can actually be taken out of the engine instead of moving the oil back into the engine.
d. Put wear sleeve (2) and seal (6) as a unit in position on locator (1).e. Put installer (4) in position on locator (1).f. Put clean engine oil on the face of nut (5) and its contact area on installer (4). Install nut (5) on locator (1).g. Tighten nut (5) until the inside surface of installer (4) comes in contact with locator (1).h. Remove tooling (A) from the crankshaft seal and wear sleeve. Tooling (A) will install the seal and wear sleeve to the correct depth on the crankshaft.END BY:a. install vibration damper and pulley

Have questions with 09010-03840?





19010-02030 BODY ASSY, INJECTI 19010-02020 19010-02010 19010-02000 19010-01990
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-03840

Back to top