Fuel injectors
  1. Home
  2. denso
  3. #09010-03132

09010-03132 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-03132 BODY ASSY, INJECTI
Rating:
24
Buy BODY ASSY, INJECTI 09010-03132 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-03132 BODY ASSY, INJECTI
001. [01] 19011-03121 HOUSING KIT, INJEC
001-001. [03] 94904-30010 BOLT, STUD 85265-00057
003. [04] 09013-10010 HOLDER, DELIVERY V 09013-10010
005. [04] 09013-60040 SPRING, DELIVERY V 09013-60040
006. [04] 09013-70010 GASKET, DELIVERY V 85265-00019
007. [04] 09014-00061 VALVE SUB-ASSY, IN MM500964
008. [04] 09015-00630 ELEMENT SUB-ASSY,
009. [04] 09015-60010 PINION, PLUNGER CO 85265-00074
010. [04] 09015-70010 SCREW, PLUNGER CON 85265-00027
011. [04] 09016-10160 SLEEVE, PLUNGER CO 85265-00073
011. [04] 09016-10330 SLEEVE, PLUNGER CO
012. [04] 09016-30010 SEAT, SPRING, UPR 09016-30010
012. [04] 09016-30191 SEAT, SPRING, UPR
013. [04] 09016-40090 SPRING, PUMP PLUNG 09016-40090
014. [04] 09016-50160 SEAT, SPRING, LWR
015. [04] 09017-00070 TAPPET SUB-ASSY,IN 09017-00070
016. [04] 09018-90090 PLUG, INJECTION PU 09018-90090
016. [04] 09018-90060 PLUG, INJECTION PU 85265-00075
017. [01] 09019-10082 CAMSHAFT, INJECTIO 09019-10081
018. [02] 09019-30020 RING, CAMSHAFT ADJ 09019-30020
019. [6C] 09019-40150 PLATE, CAMSHAFT SH
019. [6C] 09019-40140 PLATE, CAMSHAFT SH
019. [6C] 09019-40060 PLATE, CAMSHAFT SH 09019-40060
019. [6C] 09019-40050 PLATE, CAMSHAFT SH 09019-40050
019. [6C] 09019-40040 PLATE, CAMSHAFT SH 09019-40040
019. [6C] 09019-40030 PLATE, CAMSHAFT SH 09019-40030
019. [6C] 09019-40020 PLATE, CAMSHAFT SH 09019-40020
019. [6C] 09019-40010 PLATE, CAMSHAFT SH 09019-40010
020. [01] 09020-10300 COVER, BEARING 09020-10300
021. [01] 09020-60160 GASKET, BEARING CO
021. [01] 09020-60010 GASKET, BEARING CO 09020-60010
022. [01] 09021-20110 RACK, CONTROL
023. [01] 09021-50011 SCREW, RACK GUIDE 09021-50011
023. [01] 09021-50060 SCREW, RACK GUIDE 09021-50060
024. [02] 09022-20070 WASHER, FUEL PIPE 85265-00079
025. [02] 09023-00031 PLATE SET, VALVE H 85265-00052
026. [02] 09024-00010 BLEEDER SUB-ASSY, 09024-00010
026. [01] 09024-00010 BLEEDER SUB-ASSY, 09024-00010
026-001. [01] 09024-10010 WASHER, AIR BLEEDE MM500486
026-002. [01] 09024-20010 NIPPLE, AIR BLEEDE 85265-00013
026-003. [01] 09024-30030 PACKING, AIR BLEED 85265-00016
026-004. [01] 09024-40010 SCREW, AIR BLEEDER 09024-40010
027. [02] 09025-10010 WASHER, INJECTION 85265-00077
028. [01] 09027-01460 COVER SUB-ASSY, IN
028-001. [01] 09027-50182 PROCESSING DRAWING
028-002. [01] 09027-20210 GASKET, INJECTION
028-003. [02] 09024-30030 PACKING, AIR BLEED 85265-00016
028-004. [02] 09027-60030 SCREW
029. [4C] 09031-10150 PLATE, TAPPET ADJU 09031-10150
029. [4C] 09031-10140 PLATE, TAPPET ADJU 09031-10140
029. [4C] 09031-10130 PLATE, TAPPET ADJU 09031-10130
029. [4C] 09031-10120 PLATE, TAPPET ADJU 09031-10120
029. [4C] 09031-10110 PLATE, TAPPET ADJU 09031-10110
029. [4C] 09031-10100 PLATE, TAPPET ADJU 09031-10100
029. [4C] 09031-10090 PLATE, TAPPET ADJU 09031-10090
029. [4C] 09031-10080 PLATE, TAPPET ADJU 09031-10080
029. [4C] 09031-10070 PLATE, TAPPET ADJU 09031-10070
029. [4C] 09031-10060 PLATE, TAPPET ADJU 09031-10060
029. [4C] 09031-10050 PLATE, TAPPET ADJU 09031-10050
029. [4C] 09031-10040 PLATE, TAPPET ADJU 09031-10040
029. [4C] 09031-10030 PLATE, TAPPET ADJU 09031-10030
029. [4C] 09031-10020 PLATE, TAPPET ADJU 09031-10020
029. [4C] 09031-10010 PLATE, TAPPET ADJU 09031-10010
030. [03] 90160-06051 NUT, HEXAGON 85265-00085
031. [03] 90258-06001 WASHER, SPRING 90258-06001
032. [04] 94904-71360 BOLT, W/WASHER 94904-71360
033. [02] 94910-10120 BEARING, ROLLER 94910-10121
034. [01] 94914-00060 O-RING 85265-00061
035. [01] 94914-00380 O-RING 85265-00084
036. [01] 94918-00060 SCREW, HOLLOW 85265-00076
037. [01] 94918-00310 SCREW, HOLLOW 85265-00078

Include in #3:

09010-03132 as BODY ASSY, INJECTI
19000-00121

Cross reference number



Part num Firm num Firm Name
09010-03132    BODY ASSY, INJECTI




Information:


Illustration 1 g00564355
7W-2743 Electronic Speed Switch (ESS)
(1) Push button for Overspeed Verification
(2) Reset button
(3) Overspeed indicator lamp
(4) Seal screw plug for adjusting the engine overspeed
(5) Seal screw plug for adjusting the crank terminate speed
(6) Seal screw plug for adjusting the oil step pressure speed setting The procedure for the magnetic pickup test will determine if the operation of the magnetic pickup is correct.
Connect a 6V-7070 Digital Multimeter to the "COM" terminal and the "SIG" terminal. The terminals are (ESS-3)and (ESS-4) of the ESS. Set the meter voltage scale to a scale that is greater than 1.5 VAC. Start the engine. Run the engine at low idle or 600 rpm. Choose the one that is larger. If the voltage that is measured is 1.5 VAC or more, the operation of the magnetic pickup is correct. If the voltage is less than 1.5 VAC, go to Step 2.
Stop the engine. Disconnect the wiring for the magnetic pickup at the plug-in connector. Connect the voltmeter to the connector terminals of the magnetic pickup. Start the engine. Run the engine at low idle or 600 rpm. Choose the one that is larger. If the voltage that is measured is 1.5 VAC or more, repair the wiring that is between the magnetic pickup and the ESS. If the voltage is less than 1.5 VAC, go to Step 3.
Illustration 2 g00564913
Magnetic pickup
(1) Clearance
(2) Magnetic pickup
(3) Wires to the connector
(4) Locknut
(5) Flywheel housing
(6) Ring gear
Loosen locknut (4) and turn magnetic pickup (2) in the counterclockwise direction in order to remove magnetic pickup (2) from flywheel housing (5). Turn the flywheel until a gear tooth of ring gear (6) is directly in the center of the threaded hole for magnetic pickup (2). Install magnetic pickup (2) in flywheel housing (5).
Turn magnetic pickup (2) in the clockwise direction until the end of magnetic pickup (2) slightly touches the gear tooth. Turn the magnetic pickup for one-half turn in the counterclockwise direction in order to set correct clearance (1). Tighten locknut (4) to a torque of 45 7 N m (33 5 lb ft). Note: Do not allow the magnetic pickup to turn while the locknut is tightened.
Repeat Step 2. If the voltage is still less than 1.5 VAC, replace the magnetic pickup.

Have questions with 09010-03132?





09016-90130 BODY, INJECTION PU 09016-90120 09016-90110 09016-90100 09016-90070
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 09010-03132

Back to top