Fuel injectors
  1. Home
  2. denso
  3. #09010-02500

09010-02500 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-02500 BODY ASSY, INJECTI
Rating:
48
Buy BODY ASSY, INJECTI 09010-02500 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-02500 BODY ASSY, INJECTI MM500662
001. [01] 19011-01361 HOUSING KIT, INJEC MM501004
001-001. [03] 94904-30010 BOLT, STUD ME702091
003. [06] 09013-10010 HOLDER, DELIVERY V ME022081
005. [06] 09013-60010 SPRING, DELIVERY V MM500666
006. [06] 09013-70110 GASKET, DELIVERY V ME702624
008. [06] 09014-00010 VALVE SUB-ASSY, IN MM500669
010. [06] 09015-00630 ELEMENT SUB-ASSY, MM500671
011. [06] 09015-60010 PINION, PLUNGER CO ME702058
012. [06] 09015-70010 SCREW, PLUNGER CON ME702059
013. [06] 09016-10330 SLEEVE, PLUNGER CO ME702060
014. [06] 09016-30190 SEAT, SPRING, UPR ME736080
015. [06] 09016-40010 SPRING, PUMP PLUNG ME702062
016. [06] 09016-50010 SEAT, SPRING, LWR ME702063
017. [06] 09017-00130 TAPPET SUB-ASSY,IN ME702064
017-001. [06] 09017-30010 BOLT, INJECTION PU ME702066
017-002. [06] 09017-40010 NUT, INJECTION PUM ME702067
017-003. [06] 09016-90130 BODY, INJECTION PU ME702065
017-003. [06] 09017-10173 TAPPET, INJECTION
017-004. [06] 09017-60010 PIN, INJECTION PUM ME702068
017-005. [06] 09018-10030 ROLLER, INJECTION ME702070
017-006. [06] 09017-80030 BUSHING, INJECTION ME702069
017-007. [06] 09017-50040 SLIDER ME736247
018. [06] 09018-90090 PLUG, INJECTION PU ME703276
019. [01] 09019-10430 CAMSHAFT, INJECTIO
020. [01] 94915-00960 SEAL, OIL MM500730
021. [01] 94910-10071 BEARING, ROLLER ME702562
022. [01] 09019-30050 RING, CAMSHAFT ADJ ME702073
023. [3C] 09019-40360 PLATE, CAMSHAFT SH ME703469
023. [3C] 09019-40350 PLATE, CAMSHAFT SH ME703468
023. [3C] 09019-40340 PLATE, CAMSHAFT SH ME703467
023. [3C] 09019-40170 PLATE, CAMSHAFT SH ME703271
023. [3C] 09019-40160 PLATE, CAMSHAFT SH ME703270
023. [3C] 09019-40100 PLATE, CAMSHAFT SH MM500694
023. [3C] 09019-40090 PLATE, CAMSHAFT SH MM500693
023. [3C] 09019-40080 PLATE, CAMSHAFT SH MM500692
023. [3C] 09019-40070 PLATE, CAMSHAFT SH ME702076
024. [01] 94914-01550 O-RING MM500867
025. [04] 94904-71360 BOLT, W/WASHER ME022507
026. [03] 90258-06001 WASHER, SPRING ME702596
027. [01] 09020-10220 COVER, BEARING MM500695
028. [01] 09021-20010 RACK, CONTROL ME702079
029. [01] 09021-50060 SCREW, RACK GUIDE ME728163
029. [01] 09021-50011 SCREW, RACK GUIDE ME702080
030. [03] 09023-00031 PLATE SET, VALVE H ME702082
030. [03] 09023-00050 PLATE SET, VALVE H ME702558
031. [01] 94918-00600 SCREW, HOLLOW MM501002
032. [02] 09025-10010 WASHER, INJECTION ME702595
034. [01] 09027-00412 COVER SUB-ASSY, IN 09027-00412
034-001. [01] 09027-10201 PLATE, INJECTION P
034-002. [01] 09027-20220 GASKET, INJECTION ME702085
034-003. [02] 09024-30030 PACKING, AIR BLEED ME702057
034-004. [02] 09027-60030 SCREW ME703028
034-005. [01] 09028-00040 CLEANER, INJECTION ME022089
034-006. [01] 09024-10010 WASHER, AIR BLEEDE ME702102
035. [03] 90160-06051 NUT, HEXAGON ME702588
036. [01] 09106-00080 GAUGE SUB-ASSY, GO ME022613
039. [01] 94918-00310 SCREW, HOLLOW ME702236
040. [01] 94914-00380 O-RING ME702097
041. [01] 09036-10040 BEARING, CENTER ME702088
042. [02] 94901-81030 WASHER, COPPER PLA ME702094
043. [02] 09036-60021 SCREW, GUIDE ME022106
043. [02] 91050-05351 SCREW, CROSSRECESS ME702597
044. [02] 09022-20070 WASHER, FUEL PIPE ME702217
047. [01] 09024-80010 WASHER, DRAIN SCRE ME702175
048. [01] 09024-90010 SCREW, DRAIN ME022112
049. [02] 09024-00010 BLEEDER SUB-ASSY, ME702083
049-001. [02] 09024-10010 WASHER, AIR BLEEDE ME702102
049-002. [02] 09024-20010 NIPPLE, AIR BLEEDE ME022094
049-003. [02] 09024-30030 PACKING, AIR BLEED ME702057
049-004. [02] 09024-40010 SCREW, AIR BLEEDER MM501930
054. [01] 19025-00021 PIPE ASSY, OVERFLO 31661-13800
054-001. [01] 09025-00030 NIPPLE SUB-ASSY, O 90250-0030
054-002. [01] 94907-21030 RING, SNAP 94907-21030
054-003. [01] 94959-20501 PIPE, STRAIGHT ME022423
058. [01] 94914-00060 O-RING MM500727
059. [01] 94910-10120 BEARING, ROLLER ME702096
062. [3C] 09019-40150 PLATE, CAMSHAFT SH ME703273
062. [3C] 09019-40140 PLATE, CAMSHAFT SH ME703272
062. [3C] 09019-40060 PLATE, CAMSHAFT SH ME022103
062. [3C] 09019-40050 PLATE, CAMSHAFT SH ME022102
062. [3C] 09019-40040 PLATE, CAMSHAFT SH ME022101
062. [3C] 09019-40030 PLATE, CAMSHAFT SH ME022100
062. [3C] 09019-40020 PLATE, CAMSHAFT SH ME022099
062. [3C] 09019-40010 PLATE, CAMSHAFT SH ME702075
063. [01] 09019-30020 RING, CAMSHAFT ADJ ME702074

Include in #3:

09000-05023 as BODY ASSY, INJECTI
09000-05430
09000-05440
09000-05450
09000-05463
09000-05470
09000-05483
09000-05493
09000-05500
09000-05510
09000-05833
09000-05853
09000-05910
09000-05960
09010-02500

Cross reference number



Part num Firm num Firm Name
09010-02500  MM500662  BODY ASSY, INJECTI
MM500662    MITSUBISHI BODY ASSY, INJECTI




Information:

Start By:a. remove fuel injection lines 1. Remove bolt (1) and clamp (2) from the fuel injection nozzles to be removed.2. Install Tool (A) with the inside lip of the puller on the lower stepped diameter of the nozzle and the tip of the button in the threaded hole for bolt (1).
Do not exceed a torque of 17 N m (150 lb in) on the screw of Tool (A) during removal of the nozzle. Added force can cause the stem of the nozzle to bend or break off.
3. Tighten the screw of Tool (A) to a maximum torque of 17 N m (150 lb in) to remove fuel injection nozzle (3).4. If the fuel injection nozzle can not be removed with a maximum torque of 17 N m (150 lb in) on the screw of Tool (A), remove Tool (A).
Typical Example5. Remove the protective cap from fuel injection nozzle (3), and install Tool (B) as shown.
Hold Tool (B) so the center line of the tool is in alignment with the centerline of fuel injection nozzle (3). This will prevent distortion of the nozzle which can cause it to bend or break off during removal.
6. Remove the fuel injection nozzle with Tool (B).7. If Tool (B) was used to remove the fuel injection nozzle, replace the nozzle.8. If Tool (A) was used to remove the fuel injection nozzle, remove the carbon dam seal on the end of the nozzle.Install Fuel Injection Nozzle
1. Use Tool (C) to clean the bore for the fuel injection nozzle. Use an open end wrench or tap driver to turn Tool (C).2. Make reference to Special Instruction, Form No. SEHS7292, for the use of Tool (D). Clean the fuel injection nozzle with Tool (D). 3. Install a new seal (4) on fuel injection nozzle (3).4. Put carbon dam seal (5) on the small end of Tool (E). Expand the carbon dam seal by sliding it to the large end. Put Tool (E) against the fuel injection nozzle. Slide carbon dam seal (5) off Tool (E) on to the nozzle. Slide the carbon dam seal into position in the groove on the nozzle as shown. 5. Put fuel injection nozzle (3) in position in the cylinder head. Install clamp (2) and bolt (1) to hold the nozzle in position.End By:a. install fuel injection lines

Have questions with 09010-02500?





09010-02730 BODY ASSY, INJECTI 09010-01641 09010-01630 09010-01590 09010-01581
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 09010-01021

Group cross 09010-02500

Back to top