Fuel injectors
  1. Home
  2. denso
  3. #09010-02210

09010-02210 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-02210 BODY ASSY, INJECTI
Rating:
8
Buy BODY ASSY, INJECTI 09010-02210 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-02210 BODY ASSY, INJECTI 6 075 1203 20
001. [01] 09010-90031 HOUSING SUB-ASSY, 22101-1480
001. [01] 19011-01790 HOUSING KIT, INJEC
001-001. [03] 94904-30010 BOLT, STUD 22857-1060A
002. [06] 09013-10020 HOLDER, DELIVERY V 6 053 1250 60
003. [06] 09013-60010 SPRING, DELIVERY V 2214J-76020
004. [06] 09013-70010 GASKET, DELIVERY V 22847-1450
005. [06] 09014-00010 VALVE SUB-ASSY, IN 2210E-77020
006. [06] 09015-00050 ELEMENT SUB-ASSY, 22104-1340
007. [06] 09015-60010 PINION, PLUNGER CO 22128-1020A
008. [06] 09015-70010 SCREW, PLUNGER CON 22865-1280A
009. [06] 09016-10330 SLEEVE, PLUNGER CO 22118-1310A
010. [06] 09016-30191 SEAT, SPRING, UPR 22119-1190A
011. [06] 09016-40010 SPRING, PUMP PLUNG 6 056 1200 80
012. [06] 09016-50010 SEAT, SPRING, LWR 22122-1060
013. [06] 09017-00020 TAPPET SUB-ASSY,IN 2210G-77020
013. [06] 09017-00130 TAPPET SUB-ASSY,IN 22105-1260
013-001. [06] 09017-30010 BOLT, INJECTION PU 0901H-30010
013-002. [06] 09017-40010 NUT, INJECTION PUM 6 053 1252 40
013-003. [06] 09016-90110 BODY, INJECTION PU 6 306 1205 20
013-003. [06] 09016-90130 BODY, INJECTION PU 22145-1010
013-003. [06] 09017-10173 TAPPET, INJECTION
013-004. [06] 09017-60010 PIN, INJECTION PUM 22105-1130
013-005. [06] 09018-10010 ROLLER, INJECTION 22105-1140
013-005. [06] 09018-10030 ROLLER, INJECTION
013-006. [06] 09017-80010 BUSHING, INJECTION 22105-1150
013-006. [06] 09017-80030 BUSHING, INJECTION
013-007. [06] 09017-50040 SLIDER 6 306 1205 40
015. [06] 09018-90090 PLUG, INJECTION PU 22845-1420A
016. [01] 09019-10021 CAMSHAFT, INJECTIO 22123-1210
017. [01] 94915-01750 SEAL, OIL 22823-1220
018. [02] 94910-10120 BEARING, ROLLER 22837-1230A
019. [02] 09019-30020 RING, CAMSHAFT ADJ 22124-1160A
020. [6C] 09019-40060 PLATE, CAMSHAFT SH 22885-4950A
020. [6C] 09019-40050 PLATE, CAMSHAFT SH 22885-4940A
020. [6C] 09019-40040 PLATE, CAMSHAFT SH 22885-4930A
020. [6C] 09019-40030 PLATE, CAMSHAFT SH 22885-4920A
020. [6C] 09019-40020 PLATE, CAMSHAFT SH 22885-4910A
020. [6C] 09019-40010 PLATE, CAMSHAFT SH 22885-4900A
021. [02] 94914-00060 O-RING 22813-1280
024. [01] 09020-10053 COVER, BEARING 6 053 1257 10
025. [01] 09021-20010 RACK, CONTROL 22113-1320A
026. [01] 09021-50060 SCREW, RACK GUIDE 22811-4850A
027. [02] 09022-20070 WASHER, FUEL PIPE 0 902 2200 70
027. [02] 09022-20011 WASHER, FUEL PIPE 22873-1240
028. [01] 94918-00310 SCREW, HOLLOW S2283-51310-A
029. [03] 09023-00031 PLATE SET, VALVE H 22109-1090A
030. [02] 09024-00010 BLEEDER SUB-ASSY, 22106-1060
030-001. [02] 09024-10010 WASHER, AIR BLEEDE 22847-2150A
030-002. [02] 09024-20010 NIPPLE, AIR BLEEDE 22873-1250
030-003. [02] 09024-30030 PACKING, AIR BLEED 22847-1890A
030-004. [02] 09024-40010 SCREW, AIR BLEEDER 2211H-77020
033. [01] 09024-80010 WASHER, DRAIN SCRE 22847-1730A
034. [01] 09024-90010 SCREW, DRAIN 6 053 1266 20
035. [01] 09025-00020 NIPPLE SUB-ASSY, O 6 056 1325 60
036. [02] 09025-10010 WASHER, INJECTION 22865-1290A
037. [01] 94918-00060 SCREW, HOLLOW 22835-1110A
037. [01] 94918-00600 SCREW, HOLLOW 22835-1100
038. [01] 94914-00380 O-RING 22817-1540A
039. [01] 09029-00330 GAUGE SUB-ASSY, IN 22112-1110
041. [01] 09027-00840 COVER SUB-ASSY, IN 22102-1130
041-002. [02] 09024-30030 PACKING, AIR BLEED 22847-1890A
041-003. [02] 09027-60030 SCREW 22815-1550A
041-006. [01] 09024-10010 WASHER, AIR BLEEDE 22847-2150A
041-007. [01] 09028-00040 CLEANER, INJECTION 0 902 8000 40
041-008. [01] 09027-10201 PLATE, INJECTION P
041-009. [01] 09027-20220 GASKET, INJECTION 22847-2180A
043. [04] 94904-71360 BOLT, W/WASHER 22815-2500A

Include in #3:

09000-07281 as BODY ASSY, INJECTI
09010-02210

Cross reference number



Part num Firm num Firm Name
09010-02210  6 075 1203  BODY ASSY, INJECTI
6 075 1203 20    HINO BODY ASSY, INJECTI




Information:

Introduction
The 6V7020 Nozzle Puller Group can be used as a replacement for the five nozzle puller groups (6V4054, 6V4061, 6V6976, 6V6980 and 6V6981) that are used to remove fuel injection nozzles from the above engines. Some of the parts in the separate tool groups are the same, but in the 6V7020 Nozzle Puller Group only one of each item is included. The 6V7020 Nozzle Puller Group also has several parts and tools that are not in the other five puller groups. See the specific Service Manual nozzle removal procedure. See the information that follows for tool operation.1100, 3100, and 3200 Engine Fuel Injection Nozzles (9L6969, 9L7883, 9L8965, 9L9263, 9N3299, 9N3700, 9N3979, 1W5829)
1. To remove the fuel nozzles from the above engines, disassemble 6V6976 Nozzle Puller Group (1). 2. The tool parts shown above will be needed for nozzle removal.3. Disconnect and remove the rocker shaft, see the Service Manual for procedure. 4. Disconnect fuel line (2) and nozzle fuel line (3), and remove adapter (4) from the cylinder head. Remove bolt (5) and the clamp. 5. Install 6V4151 Leg (6) in the hole with threads where the rocker shaft was fastened. Install 6V4149 Jaw (7) and 6V4152 Screw (8) on fuel nozzle (9). [Jaw (7) will slide into notches in nozzle (9).] 6. Install 6V4150 Leg (10) in 6V4153 Plate (11) and install the plate over leg (6) and screw (8). 7. Install the nut and the washer on screw (8), and using a wrench as shown, remove the nozzle.3300 Engine Fuel Injection Nozzles (7N0449)
1. The tool parts shown above are needed to remove the fuel injection nozzles from this model engine.2. Disconnect the fuel lines and remove the nozzle hold down clamp from both the nozzle to be removed and the nozzle next to it. 3. Install 6V4151 Leg (1) next to the nozzle to be removed. Install 6V4150 Leg (2) in the hole with threads in it by the next nozzle. Put 6V4149 Jaw (3) and 6V4152 Screw (4) on the injector that is to be removed. 4. Put 6V4054 Puller (5) on legs (1) and (2) and install 0S1618 Bolt (6) as shown. Install 1B4206 Nut (7) and 2S5658 Washer on screw (4). Remove the injector.3204 Engine Fuel Injection Nozzles (1W3996)
1. Loosen fuel line (1) and move adapter (2) to get clearance for nozzle removal. Remove bolt (3) and the clamp. 2. Install 6V4152 Screw (4) and 6V6978 Head (5) on the nozzle. Install the remainder of the parts of the nozzle puller group as shown. 3. Be sure 6V6979 Leg (6) is on top of the rocker shaft mount bolt (7). Use a wrench to hold screw (4) so it will not turn while the injector is being removed.3300 Engine Fuel Injection Nozzles (8N7001, 8N7002, 8N7003, 8N7005)
The 6V6980 Nozzle Puller Group is used to remove the fuel injection nozzles for these engines. 1. Disconnect the fuel line and remove the hold down clamp and bolt from the nozzle, but do not remove the nozzle

Have questions with 09010-02210?





09010-03610 BODY ASSY, INJECTI 09010-02730 09010-02500 09010-02321 09010-02291
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 09010-01021

Group cross 09010-02210

Back to top